Under $25

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

Bandai's "30 Minutes Sisters" figure-kit lineup expands with SIS-M00 Illshana! This all-in-one kit includes parts to build the figure, three interchangeable tempo-printed facial expressions, and armor parts. A pair of clubs are included that can be connected with joint parts, and her winged backpack is articulated, allowing for expressive poses. The impression created by the design of her hair ornament parts and weapons is that of a "little devil"-type character! You can use parts from the "30 Minutes Sisters" lineup to customize her with different faces, hairstyles and body parts, too. Order her for your own collection today!

The YMF-X000A Dreadnought Gundam (aka Dreadnaught, X Astray) is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED X Astray. Its main pilot is Prayer Reverie. Based on technology stolen from the Earth Alliance, the Dreadnought was jointly developed by PLANT's three primary military design bureaus: Clarke, Asimov, and Heinlein. It was a testbed for ZAFT's newly developed Neutron Jammer Canceller, which allowed the use of nuclear power under Neutron Jammer interference, making it the first mobile suit to be powered by a nuclear engine. The Dreadnought's Neutron Jammer Canceller was installed in its head, unlike the later nuclear-powered mobile suits that were developed using its data. Therefore, while its head was a custom made, Gundam type head, its body reused many parts from the ZGMF-600 GuAIZ to shorten its development time. Additionally, several of its weapons were based on those used by the GuAIZ.Due to its prototype nature, the Dreadnought's Neutron Jammer Canceller has a greater effective range than later units. Instead of being confined to the Dreadnought's nuclear engine, it also allowed nuclear reactions to occur nearby. Taking advantage of the nuclear engine's high output, the Dreadnought was equipped with the Phase Shift armor and the new DRAGOON System, both of which consume massive amount of power. In case the Neutron Jammer Canceller is missing or inoperable, the Dreadnought could still function using its internal battery, though it was unable to use the Phase Shift armor in this state.The DRAGOON System (Disconnected Rapid Armament Group Overlook Operation Network System) is similar in concept to the Wired Gunbarrels equipped by the Alliance's TS-MA2mod.00 Moebius Zero, but its remote weaponry are controlled wirelessly via quantum communication, which is immune to the Neutron Jammers' disruptive effects. The power intensive nature of the DRAGOON System is attributed to the quantum communication. Like the Wired Gunbarrels, the DRAGOON System can only be operated by pilots who have a high level of spatial awareness. Initially, the Dreadnought's remote weaponry only consisted of two waisted-mounted XM1 "Pristis" Beam Reamers, it gained more remote weaponry when a large, X-shaped backpack armed with four DRAGOON units was later mounted onto the mobile suit.The word 'Dreadnought' means a fearless person, and officially, it was selected as the name of this mobile suit to convey the wish that it would be a fearless machine that protects the PLANTs. However, at the development site, it was joked that the name refers to the mobile suit's pilot, who borne increased risk as the machine has a dangerous nuclear engine. Despite this joke, the Dreadnought is said to be safe as sufficient protection is built-in. With the X-shaped backpack, the Dreadnought is also called 'X Astray', but it is unrelated to the Astray series mobile suits. The 'X' is a reference to the shape of its backpack, while 'Astray' is derived from the fact that although the Dreadnought was meant to be a weapon for killing, its pilot, Prayer Reverie, wanted to use it for saving lives instead.

GAT-01A1+AQM/E-X04 Gunbarrel Dagger is a mobile suit introduced in the original design series Mobile Suit Gundam SEED MSV. It is most notably piloted by Morgan Chevalier. A variant of the GAT-01A1 Dagger (aka 105 Dagger) piloted by the "Moonlight Mad Dog", Morgan Chevalier. The Gunbarrel Dagger mounts the AQM/E-X04 Gunbarrel Striker as a Striker Pack, granting the suit usage of the remote controlled Wired Gunbarrels (which could only be controlled by individuals with high spatial awareness, like Morgan) and perhaps the Striker's Gatling gun, in addition to the Dagger's standard weaponry. The Gunbarrel Striker can be automated or piloted, and if it is the latter, the front section can be detached after the Striker Pack docks to the Dagger's back, which make sense as the unit's pilot is useless after the pack docks with the MS. In fact, this is what Morgan often does if the pack is delivered in battle by a pilot. As the wires of the wired gunbarrels can be easily severed during combat, a backup Gunbarrel Striker is always prepared in advance and send out when almost all the wired gunbarrels have been severed or destroyed.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ Uingu Gandamu Zero?) (aka Wing Zero, Wing 0, or just Zero) is a mobile suit that appears in Mobile Suit Gundam Wing. Wing Zero was the first Gundam designed by the five engineers who had developed the OZ-00MS Tallgeese. Around A.C. 175, the MS, which was developed as a "weapon" by OZ, began to evolve as an epoch-making mobile weapon based on the Tallgeese (Prototype Leo). Meanwhile, several engineers that were at the core of the Tallgeese development ran away from OZ to develop even higher performance MS. Five of them gathered to develop a MS that would adopt "technology and materials that did not yet exist at that point in time", including "Gundanium", which was a cutting-edge material at that time. Having been developed in light of the Tallgeese's failure, it became a dreadful machine equipped with an interface that transcended the limits of the pilot. That is "Wing Zero", and the material adopted gave it the code name "Gundam". By transforming into Neo Bird Mode, high-speed cruising is possible; in addition, the Twin Buster Rifle has the power to destroy a space colony in a single hit.Wing Zero's head unit is an aggregation of various sensors and head Vulcan Guns are not equipped. Its chest unit is equipped with the main generator and a "ZERO System" built-in type cockpit. The ZERO System also turned out to be what the five engineers feared the most as it forced the pilot to achieve the "perfect victory". The five engineers, harboring a fear of the dimension of Wing Zero's excessive destruction coefficient (in practice, the parts with the required specifications could not have been supplied at that point in time), suspended the machine's development and sealed its design data. In hiding, the five engineers who had returned to their respective base colonies would develop five "Gundams" that could be said to be unique Wing Zero-derived machines. And then in A.C. 195, the seal was broken by Quatre Raberba Winner, one of the five Gundam pilots who had carried out Operation Meteor; and Wing Zero, which had been impossible to build at the time of its design, is born.

Unleash the fiery brilliance of the HG 1/144 Wing Gundam Zero Honoo, a striking addition to the High Grade Build Fighters series! With its blazing red and orange design, this Gundam exudes an aura of unrivaled intensity and strength. The "Honoo" (flame) motif elevates the legendary Wing Gundam Zero into an iconic, battle-hardened masterpiece that will ignite the passion of any Gunpla enthusiast. Key Features: Dynamic Design: Stunning flame-inspired detailing on its wings, weapons, and armor highlights the burning resolve of the Honoo. Articulation & Posing: Fully articulated frame allows for dramatic, action-packed poses that capture the ferocity of its combat style. Custom Weaponry: Includes the Honoo Twin Buster Rifle, Honoo Sword, and other fiery armaments, showcasing its devastating offensive potential. Interchangeable Parts: Customize and enhance your Gundam with various accessories and features from other kits in the Build Fighters lineup. Easy Assembly: Part of the HG series, this kit is beginner-friendly while offering plenty of detail to satisfy experienced builders.

The SD-237S Star Winning Gundam is a Gunpla that appears in Gundam Build Fighters Try and Gundam Build Fighters Try Island Wars. An upgrade of the SD-237 Winning Gundam, it is built and piloted by Fumina Hoshino. Realizing that the Winning Gundam is too support-oriented, Fumina sets out to upgrade her Gunpla with more individual fighting power and the end result is the Star Winning Gundam. The suit's primary weapons consist of a beam machine gun that can transform into a handheld blade, and four remote controlled weaponry known as Star Funnels that can be used for offensive, defensive or support purposes. The Star Funnels can also generate Plavsky Power Gate to enhance its allies' attacks. When greater firepower is required, the Star Winning Gundam can transform into "Real Mode" (a standard 1/144 Gunpla form), allowing it to launch a powerful ranged beam attack known as the Winning Beam when it enters 'Full Mode'. Like the Winning Gundam, the Star Winning Gundam can also transform into various flight forms. The head of Star Winning Gundam can transform into a Core Fighter. The suit, sans the backpack, can transform into a Core Booster, and the Mega Core Booster is formed when the backpack is added.Before the finals of the 13th U-19 Championship, the Star Winning was remodelled so that its polycaps are interchangeable with that of its teammates. This allows the Star Winning's parts to be used to repair another damaged Gunpla, so that the latter can fight properly during the overtime battle as the team's representative. To prepare for the 14th U-19 National Tournament, Team Try Fighters came up with a New Winning Road attack where the Star Funnels' Plavsky Power Gate is used to transform allied Gunpla into energy that is then absorbed by KMK-B01 Kamiki Burning Gundam, powering it up.

Sun Ce Gundam Astray- Appears in Enkotan. Sun Jian's eldest son.

Xiahou Yuan Tallgeese- Xiahou Dun's younger brother, who has been with Cao Cao since childhood. Like Xiahou Dun, he is deeply trusted by Cao Cao, but he does have a frivolous side.

Zhang He Altron Gundam- Appears in Soshoki. One of the bandits that controls a remote region in the Wei Area. He later becomes one of Cao Cao's trusted subordinates. He excels in spear-wielding, and can make full use of his extendable shoulder armor in battle.

The MBF-P01 Gundam Astray Gold Frame is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED Astray. It is piloted by Rondo Gina Sahaku. One of five identical prototype combat mobile suits developed by Orb using stolen data from the Earth Alliance's G Project, it is the only one to feature both EA and Orb hand plugs. Thus, it can use handheld weapons developed by both factions. As the color gold is reserved for use by Orb's ruling class, it is intended for Astray Gold Frame's pilot to be someone from Orb's five noble families. Like the other prototype Astray units, it is armed with two head mounted "Igelstellung" 75 mm multi-barrel CIWS guns, two back-mounted Type 70 beam sabers for close combat, a single physical shield for defense and a Type 71 beam rifle for ranged combat. The suit is made out of a lighter foaming metal compound and has minimal armor over the frame, making it lighter and faster than their G Project counterparts. It is also equipped with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back.

MD-0031 Dilanza (ディランザ Diranza?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. With the Dilanza, Jeturk Heavy Machinery set out to develop a cumulative, universal design. By modifying elements of standard Mobile Suit designs, they arrived at a new standard; a perfect balance between power output and durable armor. To compensate for the Dilanza's decreased mobility due to its large frame and heavy armor, it is equipped with high-output thrusters and hovering units. The development process, which sought to do away every possible weakness of the MS by adding counter measures could be seen as overkill. However, it resulted in an MS with balanced capabilities. As a result, the all-purpose Dilanza is Jeturk's most famous MS. The Astacassia School of Technology's Jeturk House is home to several Dilanza's, with the house's former deputy, now current leader; Lauda Neill, possessing a customised variant.

The RX-78NT-1 Gundam NT-1, nicknamed Alex, was a Newtype-use mobile suit created by the Earth Federation Forces. It was introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. By the time of the One Year War, the Principality of Zeon's lead Newtype researcher, Dr. Flanagan, had been conducting his research for more than ten years. In contrast, the Earth Federation Forces only began their Newtype research in August, U.C. 0079. This was because the EFF did not see the military value of Newtypes due to the small number of examples and low replicability.However, concepts similar to Newtype-use unit were still included as part of the RX Project. Based on existing research to improve mobile suit responsiveness, as well as reports from the Newtype pilot Amuro Ray and operating data from the RX-78-2 Gundam, the EFF began the development of a Newtype-use mobile suit with the goal of improved durability and responsiveness. For this purpose, the fourth RX-78 series unit was redesigned as a custom unit for Amuro Ray and received the new model number of RX-78NT-1.The Gundam NT-1's development was carried out by the Augusta Base, originally a facility that researched issues relating to soldiers' mental health, it was chosen because some of its researchers published essays proving the Newtype concept. For additional protection, it was equipped with a set of optional Chobam armor, earning it the nickname "Alex", which was derived from the model number prefix "RX" and the acronym "Armor Layered EXamination", the project name of its armor.To ensure the extra weight from the Chobam armor does not hinder its mobility, the NT-1 was designed with expanded propellant capacity in mind. Inspired by the Zeon concept of using the leg itself as a large vernier unit, it was fitted with propellant tank/sub-thruster hybrid units on its legs. It was also fitted with a large number of additional thrusters, both to improve its mobility and to compensate for the added weight of its armor.Thanks to its magnet coating and the use of a high-speed, large-capacity learning computer more advanced than the one used by the RX-78-2, the NT-1's responsiveness was more than three times that of existing mobile suits. In addition, it was also equipped with a panoramic cockpit and linear seat, two features that would eventually become standard on mobile suits, under the belief that they would enable a Newtype pilot to better make use of their expanded awareness.Finally, based on analysis of combat data from the RX-78-2 Gundam, it was pointed out that the loss or damage of hand-carried weapons may impact the mobile suit's combat ability, so the NT-1 was equipped with a pair of concealed 90mm Gatling Guns in its forearms.

The MS-06F Zaku II is one of many variants of the MS-06 Zaku II series and first appeared in Mobile Suit Gundam television series. The MS-06F Zaku II was the Principality of Zeon's mainstay mobile suit during the One Year War. Compared to the MS-06C Zaku II Early Production Type, the MS-06F removed the heavy anti-nuclear protections, reducing its armor weight and improving its mobility. It was also refitted with a more powerful generator: the MYFG-M-ES series fusion reactor, jointly developed by Zeonic and M&Y Company. Otherwise, it was not significantly different from its predecessors, the MS-06A and the MS-06C. There existed subtle differences among the F-Type, depending on the time of manufacture and the originating factory. Prior to the introduction of the MS-06S Zaku II Commander Type, MS-06F piloted by squadron leaders were equipped with a head-mounted blade antenna.The MS-06F could run at a speed of 85 km/h, leap 100m into the air with the use of its thrusters, and lift around 80-90t of weight with one hand. Its thrusters had a thrust of 45 tons. Though its punch had a force of 560t, doing so risked severely damaging its manipualators. Instead it more frequently used the spike armor on its left shoulder for shoulder tackle, which had a force of 4,500t. The cost of a MS-06F was equivalent to that of five Type 61 Tanks, or 1,500 civilian automobiles from the year U.C. 0078 (each costing 30% of a salaryman's average annual salary).

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The MS-06CK Zaku Half Cannon is a mobile suit from Mobile Suit Discovery. When news reaches the Zeon's North California military base of a new Earth Federation Forces mobile suit, the development team begins a project to develop a prototype machine to counter the new MS . The MS-06CK Zaku Half Cannon is based on the MS-06 Zaku II and was designed to provide mid-range artillery support . The MS-06CK Zaku Half Cannon is the same MS as the MS-06C Zaku II with the addition of the MS-06K's backpack. The backpack can be equipped with a 180mm cannon or a large gatling gun.

The MSN-03 Jagd Doga (ヤクト·ドーガ) is a Newtype-use mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Gyunei Guss and Quess Paraya. The Sleeve-customized version is piloted by Zechst Ade as seen on Mobile Suit Gundam Unicorn: The Noble Shroud manga. Based on the frame of the mass-produced AMS-119 Geara Doga, the MSN-03 Jagd Doga was a special suit designed to be used by Neo Zeon's Newtype pilots. Developed using data from the evaluation tests of the AMS-120X Geara Doga Psycommu System Test Type and the AMS-119N Röte Doga, it has a Psycho-Frame cockpit for controlling the six funnels stored on its shoulder-mounted funnel pod shields. Unlike previous mobile suits that utilize funnel weapons, the Jagd Doga cannot recharge its funnels. Other weapons of the suit include a beam saber with attached heat knife for close combat, two triple missile launchers behind the funnel pod shields, and a beam assault rifle for Gyunei's unit, while Quess' unit carried a mega Gatling beam gun.The Jagd Doga's sensors, thrusters, and nuclear reactor have also been significantly improved compared to those on Geara Doga. As a result, it has greater speed and mobility, and more power for its weapons and other systems. In terms of performance, the Jagd Doga was the second most powerful mobile suit in the Newborn Neo Zeon's arsenal, second only to the MSN-04 Sazabi.In U.C. 0096, Quess' Jagd Doga was repaired and modified by the Sleeves for their own use. A Geara Doga's right arm served as a replacement for the original that was lost during the Second Neo Zeon War. However, it also lost the right arm's funnel pod shield because of this. Other modifications include a Geara Doga's backpack replacing its original one, two funnels for its remaining funnel pod shield, and it was repainted yellow and dark gray and given the personal markings of units used by the Sleeves.

The Bandai HGIBO #030 Hekija from Mobile Suit Gundam: Iron‑Blooded Orphans is a sleek, high-mobility Valkyrja-based mobile suit, released in 1/144 scale. Designed by Teiwaz, it's a successor to the Hyakuri and Hyakuren with enhanced thruster performance and distinctive weaponry. Key Features: Scale & Build: 1/144 scale snap-fit kit, color-molded plastic with no glue required. Articulation: Ball-jointed torso and limbs, swivel thighs, and double-jointed elbows and knees for dynamic posing. Accessories: Includes a Tobiguchi blade and a bayonet rifle that mounts on the waist. Assault Form: Alternate configuration that maximizes thruster control for high-speed maneuvers. Release Information: Kit #030 in the HG Iron‑Blooded Orphans line, originally released in 2017. It reflects the evolution of Teiwaz mobile suit design with improved agility and situational combat gear. The Bandai HGIBO #030 Hekija is an excellent choice for builders seeking a sleek, dynamic suit with unique close-combat flair and notable frame engineering.

The Bandai HGUC #068 MS‑05B Zaku I (Black Tri‑Stars) is a 1/144 scale High Grade kit reproducing the Mass‑Production Zaku I in the iconic Black Tri‑Stars color scheme from *Mobile Suit Variations*. This variant includes markings for Gaia, Mash, and Ortega, embodying the trio’s Black Tri‑Stars lineage. Key Features: Scale & Build: 1/144 scale snap-fit plastic; no glue required; molded in accurate dark blue and black colors. Articulation: Ball-jointed head, mono-eye movement, front-tilt torso, double-jointed elbows, waist rotation, and more for dynamic posing. Accessories: 105 mm machine gun, initial-type bazooka with rack, Heat Hawk, Sturm Faust, knuckle/shield, commander horn option, and manipulators. Storage & Gimmicks: Bazooka racks on rear hip, weapon adapters on waist, interchangeable hands, and mono-eye adjuster. Release Info: First released August 27, 2006 (HGUC #068, MSRP ¥1,000); reissued since 2018 with updated logos :contentReference[oaicite:1]{index=1}. This kit is a fantastic choice for those seeking a detailed but approachable build, with iconic Zeon accessories and articulation depth typical of modern HGUC engineering.