3rd Party - In Stock Non Preorder/Backordera

Overview The HeMoXian 1/10 Over Zero Boxer BAKI Overdrive is a plastic model kit from HeMoXian's original Over Zero series, standing approximately 19 cm tall when assembled. The Overdrive edition presents BAKI, the series' brawler-type cyborg, in a white-and-purple color scheme with a combat loadout built around twin drill arm attachments and a pair of Butter Knife MK3 blades. HeMoXian is a Chinese manufacturer whose Over Zero line uses soft-rubber TPE components to simulate muscle deformation during posing, a technology that debuted with the original Boxer BAKI release. Key Features White-and-Purple Overdrive Colorway: A distinct scheme from the standard Boxer BAKI release. TPE Musculature: Flexible TPE sections on the exposed-muscle body deform as the figure is posed. Interchangeable Drill Arms: Two drill arm attachments swap with the standard forearms. Twin Butter Knife MK3 Blades: A matched pair of hand-held blades for dual-wield poses. Four Pairs of Interchangeable Hands: Gripping and expressive hand sets for weapon and unarmed poses. Flexible Wire Details: Purple and white wires add conduit and hair detail around the body. Over Zero Cross-Compatibility: Over Zero kits are designed to share equipment, so weapons from other releases in the line can be mounted. Builder Context The BAKI Overdrive suits intermediate builders. Assembly is snap-fit with no cement required, and the builder applies the waterslide decals. At 1/10 scale and roughly 19 cm tall, the finished figure is close in height to a Bandai Master Grade 1/100 kit. Its exposed-musculature design and TPE parts build differently from a conventional Gundam inner frame. Why Build This Kit The HeMoXian Over Zero Boxer BAKI Overdrive uses the same BAKI base body and TPE musculature as the full Boxer BAKI release, packaged with a focused loadout: two drill arms, two Butter Knife MK3 blades, four pairs of hands, and flexible wire details. It leaves out the full release's training robot, champion belt, Rock Crack gauntlets, ring outfit, and display base, and builds from 27 runners compared with 51 in the full kit. The white-and-purple scheme gives existing Boxer BAKI owners a visually distinct second figure rather than a duplicate. At about 19 cm, BAKI Overdrive stands close to the height of a Bandai MG 1/100 kit, so it displays alongside Master Grade collections without looking out of scale. No display base is included. Standard polystyrene plastic cement does not bond TPE, so modifying the musculature sections requires a different adhesive. Box Contents Parts to build BAKI (Overdrive Ver.) Drill arm attachments x2 Standard forearms x2 Butter Knife MK3 blades x2 Interchangeable hands x4 pairs Purple flexible wire White flexible wire Waterslide decal sheet Instruction manual Specifications Brand HeMoXian Series Over Zero Model Boxer BAKI (Overdrive Ver.) Manufacturer Code HMX2025006OD Scale 1/10 Height Approx. 19 cm Runners 27 Materials ABS, PS, TPE Colorway White and purple Assembly Snap-fit, no cement required Markings Waterslide decals EAN 6976038440399 Type Plastic model kit

Overview These alligator clip sticks are bamboo-dowel painting clips designed for holding individual model kit parts during airbrushing, spray priming, and hand painting. Each stick measures 225 mm in total length with a 3 mm bamboo dowel and a 35 mm spring-loaded alligator clip, providing a longer reach and more comfortable grip than most comparable clips on the market. The pointed bamboo ends insert directly into styrofoam blocks, corrugated cardboard paint stations, or any soft-material base for hands-free drying. Key Features 225 mm total length - longer than Mr. Hobby GT90 clips (170 mm) and most Amazon alternatives (150 mm), giving more clearance between your hand and wet paint 3 mm bamboo dowel - lightweight, rigid, and easy to trim to a custom length with side cutters or a hobby knife 35 mm spring-loaded alligator clip - toothed jaws grip runner gates, peg holes, and part edges securely without slipping during spraying Pointed end - inserts directly into styrofoam, floral foam, corrugated paint stations, or any soft base material for hands-free part drying Compatible with standard clip bases - works with Mr. Hobby Almighty Clip Base (GT89), third-party honeycomb bases, and DIY foam setups Consumable and replaceable - clips wear out over time from paint buildup and spring fatigue, so these are sold in bulk packs for easy restocking Builder Context Alligator clip sticks are an essential tool for any builder who paints, whether by airbrush, rattle can, or hand brush. No special skills are required - clip the part, paint it, and stick the dowel into a base to dry. Beginners setting up their first paint station and experienced builders burning through clips on large third-party kit builds will both get use out of these. Why These Clips These 225 mm alligator clip sticks are a direct, lower-cost alternative to the Mr. Hobby GT90 Almighty Clip Stick, which retails for $11.99-$12.00 per 36-pack at US hobby retailers and is frequently out of stock. At $5.99 for a 20-pack or $9.99 for a 40-pack, these provide comparable grip and build quality at roughly half the per-clip cost. The 225 mm length is 55 mm longer than the GT90, which gives noticeably more clearance when spraying primer or clear coats on larger parts from 1/100 and 1/60 scale kits. Painting clips are a consumable supply - paint buildup, bent teeth, and weakened springs mean regular replacement is normal, making per-unit cost the most important factor for builders who paint frequently. These ship from a US-based hobby retailer, so there is no import wait or minimum order compared to sourcing directly from overseas suppliers. Package Contents Alligator clip sticks (20 or 40 pieces depending on variant selected) Specifications Total Length 225 mm Dowel Diameter 3 mm Clip Length 35 mm Dowel Material Bamboo Clip Material Metal (spring-loaded) Pack Sizes 20-pack / 40-pack Base Included No (compatible with standard clip bases and foam)

Overview The Xinshi Hobby MSX007 Metal Slug X Vehicle Model Kit Set is an officially licensed SNK collection of six injection-plastic vehicle kits based on the classic 1999 arcade run-and-gun shooter Metal Slug X. Each vehicle is a snap-fit assembly kit that builds in minutes, with both sticker and waterslide decals included for game-accurate detailing. Xinshi Hobby (also known as Xinshi Model) is a Chinese manufacturer specializing in licensed video game model kits, and this was their debut product line. Key Features Officially Licensed by SNK - Authorized Metal Slug X vehicle reproductions with game-accurate proportions and detailing Six Vehicles Plus Bonus Seventh Build - Each of the six boxes contains bonus parts that combine to form a seventh vehicle, the Space Tank Snap-Fit ABS Construction - No adhesive required, with minimal runner counts that allow each vehicle to be completed in minutes Dual Decal Options - Both sticker decals and waterslide decals included in every box, giving builders flexibility in finishing PVC Mini Figures - Each box includes one soft rubber character figure, covering both protagonists (Marco and Tarma), enemy soldiers, a POW prisoner, and General Morden Functional Details - Select vehicles feature articulated elements including rotating turret guns on the SV-001 and spinning undercarriage wheels on the Slug Flyer Builder Context This set is suited for all skill levels, including complete beginners and younger builders. Each vehicle assembles from a small number of parts with snap-fit connections and no cement required. The entire six-vehicle set can be completed in roughly one hour. The PVC mini figures are molded in a single color and will benefit from painting for game-accurate appearance, but this is optional. Why Build This Kit The Xinshi Hobby Metal Slug X Vehicle Set is currently the only officially licensed model kit collection covering the iconic vehicles from Metal Slug X, making it the default option for fans who want physical representations of these arcade-era designs on their shelf. The set includes seven vehicles for the price of six - bonus parts distributed across all six boxes combine to form the Space Tank, rewarding buyers who pick up the complete collection. At approximately 3 inches per vehicle, the finished builds are compact enough to display as a group on a single shelf or desk without requiring significant space. Unlike mecha model kits that demand hours of construction, each vehicle here builds in under 15 minutes from minimal runners, which makes this set better suited to collectors and retro gaming fans than to builders looking for a complex construction project. The mini figures are a meaningful inclusion for display purposes, but they are unpainted single-color PVC - builders who want game-accurate characters will need to hand-paint them. Box Contents SV-001/II "Metal Slug" tank with Marco figure SV-F07V "Slug Flyer" with Tarma figure Joint Operation Tank "Shoe" with Prisoner (POW) figure T-2B "Melty Honey" with Soldier figure NOP-03 "Sarubia" with Shielder Soldier figure Land Seek (6.5-ton truck) with Bazooka Soldier figure Bonus Space Tank parts (distributed across all six boxes) General Morden figure (distributed across boxes) Sticker decals and waterslide decals (one sheet of each per box) Assembly instructions (one per box) Specifications Brand Xinshi Hobby Series Metal Slug X License SNK (Official) Item Code MSX007 Material ABS (vehicles), PVC (figures) Vehicle Height Approximately 7.6 cm (3 inches) Construction Snap-fit, no adhesive required Paint Required No (figures benefit from painting) Decals Sticker decals and waterslide decals included Set Contents 6 vehicle kits + 1 bonus vehicle (Space Tank) Figures Included 7 PVC mini figures (unpainted) Package Dimensions 36.7 x 17 x 13 cm Package Weight 940 g Country of Origin China EAN 6971908132077

Overview The Motor Nuclear MNP-XH17 Ma Chao is a Zhong Yong Class model kit from the Legend of Star General series, standing approximately 23.5 cm tall (to head, without backpack). Ma Chao - the "Splendid Cavalry" general of Shu Han - is reimagined here as a heavily armed mecha blending classical Chinese armor motifs with sci-fi engineering, featuring layered beast-face shoulder armor, a switchable helmet visor, and an arsenal of five named weapon systems drawn from Three Kingdoms mythology. Motor Nuclear is a Chinese manufacturer known for original mecha designs backed by a serialized manhua (Legend of Star General), and the Ma Chao is one of the largest and most accessory-dense kits in the lineup to date. Key Features Pre-Assembled Alloy Inner Frame - 13-part pre-assembled metal inner frame provides structural rigidity and display-grade weight, consistent with Motor Nuclear's MNP-tier engineering. 591 Total Parts Across 31 Runners - Includes 7 pre-painted runners with 104 pre-painted parts for display-ready color separation without painting. Nearly all parts are undergated for clean visible surfaces. Five Named Weapon Systems - Zhan Jin Hu Jia (Azure Gold Tiger Halberd, separates into short halberd and short gun), Tianwu Liutou javelins (6 total), Jin Shi Nu (Brocade Lion Crossbow, transforms into shield and arm crossbow modes), Yu Chan gauntlet, and retractable Yu Chan spike. Full On-Body Weapon Storage - All weapons mount to the mecha body via dedicated storage points on the backpack, rear waist, and arms, allowing a fully loaded display configuration without external weapon racks. Swappable Backpacks and Armor - Large and small backpacks interchange freely. Two chest armor options and a riding-pose front skirt armor are included for display versatility. Advanced Leg Linkage System - Knee articulation reaches 75 degrees with linked red inner frame exposure, lower leg bends to 90 degrees with kneecap separation and inner frame reveal. Hip joints extend downward for expanded posing range. Fur Cape Shoulder Accessory - Includes a sculpted fur cape with ornamental attachments. Left shoulder features layered ring-arm armor inspired by classical Chinese lamellar designs, right shoulder carries a beast-face motif with gold-tipped horns. Builder Context The MNP-XH17 Ma Chao is suited for intermediate to advanced builders comfortable with multi-session builds and alloy inner frame integration. Construction is snap-fit with no glue or cement required, and the pre-painted components deliver a display-ready result without painting. The build complexity and part count (591 parts) place it above Motor Nuclear's Loyal Grade kits like the Ao Bing and below the Brave Grade Lu Bu (738 parts), comparable in scope to a high-end MG Bandai kit with the added step of fitting armor over a metal skeleton. Why Build This Kit The Motor Nuclear MNP-XH17 Ma Chao is one of the most weapon-dense kits in the Legend of Star General lineup, with five distinct named weapon systems that each feature their own transformation or separation gimmick - the Jin Shi Nu crossbow alone converts between handheld, shield, and arm-mounted modes. At 23.5 cm with a total assembled weight of approximately 635 grams (with all accessories), Ma Chao has commanding shelf presence that competes with MG-scale Bandai kits while offering a visual language entirely outside the Gundam universe. The on-body weapon storage system means every weapon can be displayed mounted to the mecha simultaneously, creating a fully loaded silhouette without needing separate weapon racks or display stands. Builders who have already built Motor Nuclear's Zhao Yun or Lu Bu will recognize the engineering conventions and alloy frame integration, while the included riding-pose front skirt armor suggests compatibility with future mount accessories. The pre-painted parts and undergated runners mean this kit looks finished out of the box, making it accessible to builders who prefer not to paint but want a result that doesn't look like an unpainted model. Box Contents Main body unit x1 Interchangeable hands x10 pairs Zhan Jin Hu Jia (Azure Gold Tiger Halberd) x1 Tianwu Liutou javelins (left) x3 Tianwu Liutou javelins (right) x3 Large backpack x1 Large backpack Tianwu javelin connectors x2 sets Small backpack x1 Replacement chest armor x1 Replacement arm armor x1 Yu Chan gauntlet x1 Yu Chan spike x1 Replacement front skirt armor (riding pose) x1 Jin Shi Nu (Brocade Lion Crossbow) x1 Jin Shi Nu shield/crossbow mode connector x1 Jin Shi Nu auxiliary connectors x1 pair Jin Shi Nu rear skirt armor storage connector x1 Jin Shi Nu handle x1 Additional replacement hand parts x2 pairs Zhan Jin Hu Jia rear skirt armor connector x1 Fur cape (with ornamental attachments) x1 Body-to-stand connector x1 Hexagonal display base pieces x3 Display base connectors x3 Display base nameplate x1 Display stand x1 set Nameplate sticker sheet x1 Brand Motor Nuclear Series Legend of Star General Product Name Ma Chao (Zhong Yong Class) Model Number MNP-XH17 Height Approx. 23.5 cm (to head, without backpack) Width Approx. 16 cm (without backpack) Body Weight Approx. 377.3 g (without backpack) Total Weight (with accessories) Approx. 635 g Total Parts 591 Runners 31 (7 pre-painted runners, 104 pre-painted parts) Inner Frame Pre-assembled alloy inner frame (13 parts) Materials ABS, POM Construction Snap-fit assembly, no glue required Painting Required No - pre-painted parts and colored runners

Official Infinite Nova Retailer LA Scale Model is an authorized retailer of Infinite Nova All Infinite Nova model kits are 100% genuine and sourced directly from the manufacturer. Overview The Infinite Nova IN ERA+ THB-03M Thunderbolt Manta Ray Extreme Speed Dark is a 1/100 scale original mecha model kit from the UMD (Ultimate Minutia Design) series, and a recolored release of the Thunderbolt 2.0 Manta Ray platform. The original Manta Ray used a fluorescent pink and blue-green cyberpunk color scheme - this Extreme Speed Dark version replaces it with deep black armor panels, vivid orange accents, and gunmetal gray frame sections for a more aggressive, stealth-oriented appearance. The waterslide decals have also been upgraded from the original's standard color decals to metallic silver. IN ERA+ is the consumer label for the Infinite Dimension and SNAA collaboration - Infinite Dimension handles the industrial design work that originated in high-end GK resin kits, while SNAA provides the engineering and injection-mold manufacturing. Key Features Extreme Speed Dark Colorway: Black armor with vivid orange accent panels, gunmetal gray inner frame sections, and white mechanical detail points, replacing the original Manta Ray's fluorescent pink and blue-green scheme. Upgraded Metallic Silver Decals: Waterslide decals upgraded from the original release's standard color decals to metallic silver, enhancing surface detail contrast against the dark armor. Manta Ray Backpack: Over 30 cm long flight unit with formula-racing-inspired central body, extending wing assemblies with hydraulic-style linkages, independently rotating propellers, front missile bays, vertically adjustable rear thrusters, and internal mechanical arms for weapon mounting. Cockpit and Pilot Figure: Self-contained cockpit module housed inside the backpack with a seated pilot figure, adding narrative display potential beyond the main mecha body. Reinforced Inner Frame: Refined and tightened frame mold addresses joint stability issues from the original Thunderbolt, with improved knee articulation and waist rotation joints for better posing under the weight of the backpack. Updated Main Body: Redesigned head sculpt with streamlined racing-helmet profile and full-face visor, asymmetrical dual-color shoulder armor, and hip joint locking mechanism for improved weight-bearing stability. Weapon Loadout: Assault rifle with internal structure and removable magazine, transformable rifle blade weapons, rocket anchor cable effect parts, and trident tail weapon. Builder Context This is an advanced-intermediate kit suited for builders with MG-level experience. The 32-runner part count and layered armor-over-frame construction produce a dense, time-intensive build. Snap-fit assembly with no cement required, though the tightened knee and waist joints may require extra force during assembly. Inner frame mechanical detailing has been compared by builders to Bandai's MG 2.0 line. Painting is not required for a complete appearance thanks to factory color separation and pre-painted metallic accents, and the upgraded metallic silver decals add detail contrast without additional aftermarket purchases. The dark color scheme particularly rewards panel lining to bring out surface detail. Why Build This Kit The IN ERA+ THB-03M Thunderbolt Manta Ray Extreme Speed Dark is the most part-dense kit in the Infinite Nova 1/100 lineup, with 32 runner plates producing both a fully articulated main body and a 30 cm+ manta ray flight backpack that functions as a second display piece on its own. The black-and-orange color scheme and upgraded metallic silver decals give this version a distinctly different shelf character from the original fluorescent release - builders who want the Manta Ray platform but prefer a more subdued, stealth-oriented aesthetic should choose this version over the original colorway. The combined display with the main body mounted on the backpack in flight configuration has visual presence comparable to a 1/60 scale kit, making it one of the highest shelf-impact options available under $80 in the third-party 1/100 category. At its price point, the Thunderbolt Manta Ray competes directly with premium MG Bandai kits but offers substantially more parts, a full inner frame with exposed mechanical detailing, and a cockpit-equipped flight unit that has no Bandai equivalent. Builders should note that balancing the combined form requires the included display stand - the backpack's weight makes unsupported standing poses impractical. Box Contents Thunderbolt main body parts with updated head, shoulder armor, and inner frame components (Extreme Speed Dark colorway) Manta Ray backpack assembly (wings, cockpit module with pilot figure, propellers, missile bays, thrusters, rocket anchor cable parts) Assault rifle with removable magazine Rifle blade weapons with transformable handles Trident tail weapon 2x articulated display stands Metallic silver waterslide decal sheet Metallic foil sticker sheet Assembly instruction manual Specifications Brand Infinite Nova / IN ERA+ Designer Infinite Dimension Manufacturer SNAA Series UMD (Ultimate Minutia Design) Model Number THB-03M Colorway Extreme Speed Dark (black armor, orange accents, gunmetal gray frame) Scale 1/100 Height Approx. 24 cm (9.44 in) Backpack Length Over 30 cm Materials ABS / POM / PVC Runner Count 32 plates (21 newly molded) Assembly Snap-fit, no cement required Paint Required No (pre-painted accents, factory color separation) Decals Metallic silver waterslide (upgraded from standard color) EAN 6912171006177

Overview The Mechanicore 1/100 MEC10-ARC ZMX-42 Firehawk Arctic Combat Mode is a limited-edition color variant of Mechanicore's flagship mecha model kit. This version features a light gray base color scheme with military blue and black accents, representing a polar combat configuration. The Firehawk's design draws heavily from the MSN-04II Nightingale and MSN-04 Sazabi lineage, reinterpreted as an original Mechanicore design with a hawk-inspired silhouette. The kit converts between two distinct configurations - Genesic Heavy Assault Type and MS Close Combat Type - each with significantly different proportions and profiles. Mechanicore is a Chinese third-party manufacturer known for extremely high part counts, integrated LED systems, metal parts, and build complexity that exceeds most commercially available plastic model kits. The Arctic Combat Mode is limited to 3,888 units worldwide. Key Features Dual Configuration: Converts between Genesic Heavy Assault Type (520mm shoulder width, heavy armor) and MS Close Combat Type (152mm shoulder width, streamlined profile) Integrated LED System: Built-in LED lighting effects powered via USB Type-C Metal Parts: Includes die-cast metal components alongside PS, PC, and POM plastic for structural rigidity and weight Arctic Combat Color Scheme: Light gray base with military blue and black accents, distinct from the original red version Included Armament: Beam Tomahawk, Grenade Launcher, Beam Saber x2, and light-type shield First-Batch Bonus: Includes a set of clear transparent body armor parts for alternate display options Builder Context The Firehawk is an advanced-level kit that requires glue, paint, and finishing supplies. Build complexity is substantially above Bandai PG kits and closer to high-end garage kit territory, with extensive parts fitting, LED wiring, and screw-based assembly. Builders should expect a long-duration project with careful dry-fitting required throughout. Why Build This Kit The Mechanicore 1/100 ZMX-42 Firehawk Arctic Combat Mode is one of the most ambitious plastic model kits available from any manufacturer, with dimensions (26 cm head height, 52 cm shoulder width in Heavy Assault mode) and a parts count that dwarf even Bandai's PG line. The dual-configuration system that transforms the kit between a massive heavy assault profile and a compact close-combat silhouette is a genuine engineering feature, not a marketing gimmick - the shoulder width difference alone is over 360mm between modes. For builders who want a Nightingale-inspired design without being locked into Bandai's limited kit options, the Firehawk is currently the most detailed alternative at any scale. The Arctic Combat variant is the version to choose for builders who prefer military-toned color schemes over the original red, though both versions share identical engineering. At its price point, the Firehawk competes with premium resin conversion kits but offers the advantage of being a complete, self-contained product with integrated LED lighting and metal reinforcement out of the box. Box Contents PS, PC, POM plastic runners Die-cast metal parts LED lighting system with USB Type-C power Screws and hardware Beam Tomahawk Grenade Launcher Beam Saber x2 Light-type shield Clear transparent body armor parts (first-batch bonus) Assembly instructions Specifications Brand Mechanicore Model Code MEC10-ARC Scale 1/100 Head Height (Heavy Assault) 253mm (excluding head horn) Overall Height (Heavy Assault) 260mm Shoulder Width (Heavy Assault) 520mm Head Height (Close Combat) 234mm (excluding head horn) Overall Height (Close Combat) 278mm Shoulder Width (Close Combat) 152mm Materials PS, PC, POM, Die-Cast Metal, Screws, LED system Power USB Type-C Configurations Genesic Heavy Assault Type / MS Close Combat Type Limited Production 3,888 units worldwide Product Weight Approximately 7.7 kg Box Dimensions 72 x 56 x 26 cm Assembly Required Yes - glue, paint, and finishing supplies required

Official Infinite Nova Retailer LA Scale Model is an authorized retailer of Infinite Nova. All Infinite Nova model kits are 100% genuine and sourced directly from the manufacturer. The Infinite Nova 1/100 In Era+ RMD Lizard Polar Shark is a 1/100 scale third-party mecha model kit and the white-and-blue colorway of the In Era+ RMD Lizard. This Polar Shark edition keeps the heavily layered armor, exposed inner frame, and four-Gatling weapon loadout of the original release while replacing the standard three-shade red armor with a pre-colored white body accented in metallic navy and pearl blue. Infinite Nova, released under its In Era+ label, is a Chinese third-party studio known for dense part separation, hidden-gate engineering, and factory color separation that approaches painted-sample quality straight from the box. Key Features Polar Shark Colorway: White armor with metallic navy and pearl-blue accents and a translucent blue chest core, replacing the original three-shade red scheme. Four Heavy Gatling Guns: Back-mounted multi-barrel cannons fed by 112 individual ammunition chain links for the line's signature heavy-weapons silhouette. Beam Armament: Includes a beam axe, thermal axe, beam dagger, and beam long sword for close-combat posing. Exposed Inner Frame: High-detail integrated inner frame with pre-painted gold and silver accents visible through the segmented armor. Hidden-Gate Engineering: Hidden gates on roughly 90% of parts for clean, near-nub-free assembly. Engineered Articulation: Two-segment waist bending joint, extendable shoulder joints, and spring-loaded calf knees for dynamic posing. Decals and Finishing: Waterslide decal sheet, aluminum-foil metal stickers, and metallic-finished detail parts. Builder Context The RMD Lizard Polar Shark is suited to intermediate and advanced builders. It is a snap-fit kit, but the high part count (43 runners, roughly a 10 to 12 hour build) and the 112 hidden-gate ammunition chain links make nub cleanup time-consuming. The engineering density and inner-frame detail are comparable to MG-grade Bandai kits, and builders who have completed other In Era+ RMD releases such as the Thunderbolt will recognize the construction approach. Why Build This Kit The Infinite Nova 1/100 In Era+ RMD Lizard Polar Shark is the white-and-blue variant of the RMD Lizard, aimed at builders who want the kit's four-Gatling heavy-weapons profile in an arctic-themed scheme rather than the original red. Its factory color separation means the finished build looks display-ready without painting, which makes it accessible to builders comfortable with MG-grade Bandai kits but looking for a non-Gundam third-party subject. At roughly 24 cm with the back-mounted Gatling rack deployed, the Polar Shark has strong shelf presence and a wider footprint than most 1/100 humanoid kits. Buyers should know that the four heavy Gatling guns add significant weight to the shoulders, so posing the full weapon array depends on careful joint balancing, and the 112 hidden-gate ammunition chains are the most time-consuming part of the build. Box Contents Main body and armor parts (1 set) Integrated inner frame components (1 set) Four heavy Gatling guns with 112 ammunition chain links Beam axe, thermal axe, beam dagger, and beam long sword Optional hand parts set Backpack and weapon-mount assembly 2 connector springs and 2 ammunition-belt wires POM joint parts for elbows Waterslide decal sheet Aluminum-foil metal sticker sheet Assembly manual Specifications Brand Infinite Nova Label In Era+ Series RMD Model RMD Lizard (Polar Shark) Colorway Polar Shark (white / metallic blue) Scale 1/100 Height Approx. 24 cm Built Weight Approx. 550 g (with full equipment) Runners 43 Material ABS (with POM joint components) Articulation Two-segment waist, extendable shoulders, spring-loaded knees Assembly Snap-fit; hidden gates on approx. 90% of parts Build Time Approx. 10 to 12 hours Decals Waterslide decal sheet and aluminum-foil metal stickers Type Third-Party Gundam Gunpla-Like Mecha Model Kit

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear BV-XH02 Wen Zhong is a plastic assembly model kit from Motor Nuclear's Valiant Grade (Xunyong / BV) line, part of the Legend of Star General series. Designated as the Tian Li Star - Lei Sheng Pu Hua, Wen Zhong is inspired by Grand Preceptor Wen Zhong from the classic Chinese novel Investiture of the Gods (Fengshen Yanyi), reimagined as an original mecha design with a lightning-elemental theme expressed through blue-green transparent accent parts with metallic backing, spike-style armor geometry, and wide-shouldered aggressive proportions. The Valiant Grade line is Motor Nuclear's compact, budget-friendly entry tier - smaller in scale and part count than the flagship MNP kits, while retaining the brand's mechanical design language and articulation focus. Key Features Valiant Grade (BV) Line: Motor Nuclear's compact kit tier, delivering the brand's signature mecha aesthetics and articulation at a smaller size and lower price point than the standard MNP series. 13 Runners with Pre-Painted Details: Includes pre-painted gold runners and pre-painted metallic blue-green eye parts for display-ready color accuracy straight from the box. Lightning-Themed Transparent Parts: Blue-green transparent components are integrated throughout the shoulders, arm armor, and frame, with silver metallic paint applied to the interior surfaces for enhanced reflectivity and visual depth. Transformable Dual Gold Whips: Two multi-segment gold whips serve as the primary weapons. Each segment rotates independently, allowing the whips to be reconfigured into dual sword mode or combined into a single large weapon. POM Joint Components: Dedicated black POM runner provides durable, stable connection points across the frame's articulation joints - the same frame structure used in the BV-XH01 Xiang Yu. Four Pairs of Interchangeable Hands: Fists, straight grip, and angled grip hands provide versatile display and weapon-holding options. Full Articulation System: Head tilt and 360-degree rotation, pull-out shoulder joints, full arm raise and bend range, waist tilt, pull-down hip joints, and front/rear skirt armor with dedicated clearance mechanisms for leg posing. Builder Context The BV-XH02 Wen Zhong shares the same frame structure as the BV-XH01 Xiang Yu, making it an entry-level kit suitable for beginners. The 13-runner part count and snap-fit construction make it a quick, satisfying build that experienced builders can finish in a single sitting. Comparable in difficulty and scale to a Bandai HG kit, with no glue or paint required for a complete appearance. Some individual part connections may be tight due to POM joint tolerances - standard for this frame system. Why Build This Kit The Motor Nuclear BV-XH02 Wen Zhong is the second release in the Valiant Grade line and offers a meaningful upgrade over the BV-XH01 Xiang Yu in weapon complexity - the transformable dual gold whips that convert between whip, dual sword, and combined modes give it more display versatility than Xiang Yu's single Overlord Spear. At approximately 15 cm, Wen Zhong sits comfortably alongside Bandai HG kits on a shelf but offers a Chinese mythology-inspired spike-style aesthetic with lightning-themed transparent accents that is visually distinct from anything in the Gundam catalog. Builders interested in Motor Nuclear but not ready for the 50+ runner MNP-line kits will find the Valiant Grade Wen Zhong a practical entry point that demonstrates the brand's design language - wide shoulders, narrow waist, aggressive silhouette, integrated clear parts - at a fraction of the build time and cost. The character also previews what to expect from the upcoming full-size MNP-XH11 Wen Zhong and Black Qilin kit, which will include an alloy inner frame and a buildable mount. Box Contents 13 runners (including pre-painted gold runners and black POM joint runner) Pre-painted metallic blue-green eye parts Blue-green transparent parts with silver metallic interior coating Two multi-segment gold whips (transformable to dual swords or combined weapon) Four pairs of interchangeable hands (fists, straight grip, angled grip, default) Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Line Valiant Grade (Xunyong / BV) Model Number BV-XH02 Character Wen Zhong - Grand Preceptor Character Designation Tian Li Star - Lei Sheng Pu Hua Height Approx. 15 cm (5.9 in) Runner Count 13 Material ABS, POM Product Type Plastic assembly model kit (snap-fit) IP Original third-party mecha design Country of Origin China

Overview The Mecha Core Industry 1/100 Oberon Dark Angel Ver. 2.0 is a color variant and partial retool of the original Oberon, rendered in a black, dark gray, red, and gold color scheme inspired by dark angel aesthetics. Beyond the new colorway, this version introduces newly tooled parts - a redesigned head, an alternate chest armor option, and alternate foot armor - making it a structural upgrade rather than a simple repaint. Mecha Core Industry (also known as Nucleus Industrial or Tian Wei) is a Chinese third-party mecha manufacturer whose Oberon is the centerpiece of their Star Guardian line, recognized for its MG-scale engineering and 52 cm wingspan backpack system. Key Features Dark Angel Color Scheme - Black and dark gray outer armor over a gold matte inner frame, with deep red accent parts across shoulders, front skirt, lower legs, and collar New-Tooling Parts (Ver. 2.0) - Redesigned head sculpt with a more angular Gundam-style silhouette, alternate wider chest armor with dark gray heat sinks, and streamlined alternate foot armor Transparent Armor Options - Includes transparent black outer armor runner (swappable with solid black) and transparent red parts (swappable with solid dark red), allowing builders to reveal the gold inner frame beneath 52 cm Wingspan Backpack - Large articulated wing system with internal linkage mechanisms and built-in wing-tip supports for freestanding display Full Weapon Loadout - Energy sword, composite gun-shield, dual close-combat sabers, and dual modular close-combat weapons, all recolored to match the Dark Angel scheme Funnel System with Dedicated Display - Six feather-style remote funnels with individual transparent stands and a ring-shaped display base for floating formation arrangements Gold Matte Inner Frame - Pre-colored internal skeleton with hydraulic rod linkage at the waist and multi-joint articulation throughout the legs Builder Context The Oberon Dark Angel Ver. 2.0 is an intermediate-to-advanced build with 25 runners and snap-fit construction that does not require cement. Builders familiar with MG-grade Bandai kits will find the complexity comparable, though third-party fit tolerances apply - some pegs may need reaming or reinforcement. The wing backpack joints benefit from tightening with a joint reinforcement pen for stable posing, and the front skirt's small red accent parts can come loose during handling. An action base is recommended for display with the full wing system deployed, as the backpack weighs nearly as much as the body. Why Build This Kit The Mecha Core Industry 1/100 Oberon Dark Angel Ver. 2.0 is one of the few third-party 1/100 mecha kits that offers both a dramatic color variant and genuinely new tooling - the redesigned head, wider chest armor, and angular foot plates give the Dark Angel a distinct silhouette rather than just a palette swap. At 23 cm tall with a 52 cm wingspan, the completed build has commanding shelf presence that exceeds most MG Gunpla in sheer footprint, making it a natural display centerpiece. The transparent black and transparent red armor options add visual depth by revealing the gold inner frame, which gives intermediate builders a way to achieve a layered look without painting. Builders who already own the original white Oberon will find the Dark Angel version worth building separately for the new head and chest sculpt alone, while newcomers to Mecha Core Industry should note that the original Oberon's known fit issues - tight wing pivot joints, loose heel armor pegs, and small parts that detach on the front skirt - carry over here and benefit from basic tools like a joint reinforcement pen and nippers. For builders looking at Wing Gundam-inspired third-party kits in the 1/100 range, the Oberon Dark Angel competes directly with kits like the Infinite Dimension Genesis and Motor Nuclear offerings at a similar price point, with the funnel system and dual-option transparent armor giving it an edge in accessory count. Box Contents 25 runners (including transparent black and transparent red runners) Gold matte pre-colored inner frame runners New-tooling head parts New-tooling chest armor parts New-tooling foot armor parts Original head, chest, and foot armor parts (builder's choice) Energy sword Composite gun-shield Close-combat sabers x2 Modular close-combat weapons x2 Feather funnels x6 Dedicated transparent funnel stands x6 Circular funnel display base x1 Optional gold pre-painted armor runner x1 Specialized hands x4 pairs (open, gun grip, sword grip, fist) Display base with wing engraving x1 Display base support arm x1 Water-slide decal sheet x1 Instruction manual x1 Specifications Scale 1/100 Height 23 cm (9.1 in) Wingspan 52 cm (20.5 in) Material ABS Runner Count 25 Assembly Snap-fit, no cement required Manufacturer Mecha Core Industry (机核工业) Series Star Guardian Version Dark Angel Ver. 2.0

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA SC-010 Furious Warhammer Galahad The SNAA SC-010 Furious Warhammer Galahad is a 1/144 scale model kit from the Beyond Exquisite (BE) Round Table Knights series. Galahad is the final unit in the Sanctuary tier - the highest of three ranks in the Round Table Knights lineup (Gale, Steel Knight, and Sanctuary) - and is designed as a heavy assault knight-class mecha built to overwhelm defensive formations through raw power. SNAA is a Chinese original-IP manufacturer known for Western fantasy-themed mecha designs, and the Round Table Knights line is their most popular series among NA builders. Key Features Heavy Assault Design: Galahad has the stockiest, most heavily armored silhouette in the Round Table Knights lineup, with layered shoulder armor, a horned knight helmet, and reinforced leg plating designed for a tank-class battlefield role. Oversized Battle Axe: The primary weapon is a large-format battle axe with a broad crescent blade, giving the kit a distinct melee-focused identity compared to the sword and lance loadouts of other Round Table Knights. Arm-Mounted Shield: An integrated shield unit is built into the left forearm, maintaining Galahad's defensive theme without requiring a separate handheld shield part. Assault Hoverboard Base Unit: Galahad includes a bladed vehicle-style hoverboard that the unit can be mounted on, making it the only Round Table Knight with a dedicated ride-on assault platform. Forearm Blade/Claw: The right forearm features an integrated blade or claw attachment for close-quarters combat options beyond the primary axe. Full Inner Frame: Complete articulated skeleton consistent with all BE-series kits, supporting dynamic posing and cross-unit part compatibility. Pre-Painted Armor Panels: Multi-color separated parts with pre-painted accents for a display-ready finish out of the box. Builder Context Assembly is snap-fit with pre-painted armor. No painting or cement is required for a finished display. Build complexity is comparable to Bandai RG-grade kits, with a similar part count and inner frame structure. Water-slide decals are expected to be included for detail finishing, consistent with all previous BE-series releases. Recommended for intermediate builders or anyone who has completed at least one RG or MG kit. Why Build This Kit The SNAA SC-010 Furious Warhammer Galahad is the heaviest-looking unit in the Round Table Knights series and the only one that includes a dedicated ride-on assault vehicle, making it visually distinct from every other kit in the lineup. Where previous Sanctuary-tier knights like Percival (SC-009) emphasized weapon density and ranged capability, Galahad commits fully to a tank-class melee archetype with its oversized battle axe, integrated arm shield, and reinforced armor plating. At approximately 18 cm tall before mounting on its hoverboard base, Galahad will have the largest combined display footprint of any 1/144 Round Table Knight released to date. The Round Table Knights BE line uses snap-fit construction with pre-painted armor panels and full inner frames at price points that consistently undercut Bandai RG kits, and Galahad continues that value pattern. Builders who already own other Round Table Knights will find the shared inner frame system familiar, while the mounted hoverboard configuration offers a posing option that no other kit in the series provides. Box Contents Furious Warhammer Galahad main body components Battle axe x1 Arm-mounted shield x1 Forearm blade/claw x1 Assault hoverboard base unit x1 Water-slide decal sheet (expected) Instruction manual Specifications Brand SNAA x Starry Craftsman Series The Round Table Knights - Beyond Exquisite (BE) Model SC-010 Furious Warhammer Galahad Tier Sanctuary Scale 1/144 Height Approx. 18 cm Material ABS, POM, PVC Product Type Snap-fit Plastic Model Kit

Cangdao CD-AS-01 Guardian - Sentinels of Azure Dragon (Long Ji) The Cangdao CD-AS-01 Guardian - Sentinels of Azure Dragon is a plastic model kit with a pre-assembled alloy inner frame from Zen of Collectible's Four Sacred Beasts Sentinels line. The design draws heavily from traditional Chinese warrior armor, with dragon totem motifs integrated into the shoulder plates and waist armor and an overall silhouette inspired by ancient general's battle dress. This is Cangdao's first entry into the model kit format - the brand is better known for its premium 1/72 diecast action figures in the same Four Sacred Beasts universe, and the CD-AS-01 brings that design language into an accessible, builder-friendly kit. Key Features Pre-Assembled Alloy Inner Frame - The alloy inner frame comes ready to build on, providing solid joint tension and a stable, weighty feel throughout the finished model. Built-In LED Head Unit - The head features a magnet-activated LED system with two modes (steady glow and breathing pulse), powered by an AG0/LR521 battery. No light leakage reported in either head sculpt. Two Interchangeable Head Sculpts - One standard head and one alternate head with a gold oni-mask faceplate, both sharing the same LED electronics module. Modular Weapon System with Multiple Combinations - Two swords, a long halberd, and a round shield can be recombined: the halberd shaft connects to the sword blades to form a crescent blade, while the shield attaches to transparent effect parts and the halberd shaft to create a shield axe. Universal 3mm Hardpoints - Mounting ports are distributed across the entire body, allowing weapons to be attached in various configurations and enabling cross-brand accessory compatibility. Articulated Weapon Mounting Arms - Two multi-joint mechanical arms on the backpack provide additional weapon hardpoint positions with adjustable angles. Extensive Articulation - Butterfly shoulders, pull-down hip joints, two-stage knee and elbow bends exceeding 120 degrees, linked armor panels on front/side/rear skirts, and a retractable neck joint for deep head tilting. Builder Context This kit is suited for intermediate builders comfortable with standard snap-fit model kit assembly. The alloy frame comes pre-assembled, and plastic armor parts snap onto it, so no cement is required. The runner count is comparable to a standard Bandai MG kit. The PVC hand parts and ponytail may benefit from cleanup, and builders who paint will get the most out of the gold and dark gray frame parts, which show some visible flow marks in the molded color. Why Build This Kit The Cangdao CD-AS-01 Guardian - Sentinels of Azure Dragon stands out as one of very few Chinese-style warrior mecha model kits currently available, combining traditional armor aesthetics with a diecast alloy inner frame at a price point well below most alloy-frame kits on the market. At 21cm tall, it has display presence comparable to a standard 1/100 scale MG kit, and the weapon combination system offers more configuration options than most kits in this price range. Builders familiar with Bandai MG kits will find the construction approachable, though the PVC hand parts are a known weak point - wrist joints can loosen when holding heavier weapons, and experienced builders may want to reinforce the hand-to-wrist connection with a small amount of adhesive. The kit is the first release in what Cangdao has announced as a multi-unit Sentinels line with at least three additional colorway and weapon variants planned, making it a natural entry point for builders interested in the series. For builders who want a mecha kit with a distinctly Chinese design identity rather than the Japanese mecha aesthetic that dominates the market, the CD-AS-01 is currently one of the strongest options available from any manufacturer at this price tier. Box Contents Pre-assembled alloy inner frame Plastic armor runner sets (multiple runners, ABS/POM) PVC hand parts (multiple grip types) PVC ponytail parts Two interchangeable head sculpts (standard and gold oni-mask variant) LED unit with magnet control module and AG0/LR521 battery Two swords Long halberd Round shield Transparent effect parts Two multi-joint weapon mounting arms 3mm connector pegs Display base Water slide decal sheet (gold and red patterns) Marking sticker sheet Instruction manual Brand Cangdao / Zen of Collectible (藏道模型) Model Number CD-AS-01 Product Name Guardian - Sentinels of Azure Dragon (巡界使 龙戟) Series Four Sacred Beasts - Sentinels Line Kit Type Plastic Model Kit with Alloy Inner Frame Height Approximately 21cm Materials ABS, Diecast Alloy, POM, PVC LED Built-in head LED (steady and breathing modes), magnet-activated, AG0/LR521 battery Decals Water slide decals and marking stickers included Display Base Included

Overview The Sheik Mainland 3MIN Project-A 1/18 Fenrir A2 Standard Type is a compact, highly articulated mecha model kit from Sheik Mainland's original 3MIN Project series. Available in five colorways - Blue, Green, Yellow, Purple, and Limited Metallic Black - each box contains two identical Fenrir A2 units with weapons and a display stand. The Fenrir A2 features a near-future realistic design aesthetic with 42 points of articulation driven by durable POM (polyoxymethylene) joints, delivering articulation ranges that exceed most kits in this size class. Key Features Two Complete Kits Per Box: Each box includes two identical Fenrir A2 units in the selected colorway, enabling squad displays, kitbashing, or spare parts for customization. 42-Point Articulation with POM Joints: Durable polyoxymethylene joints throughout provide smooth, tight movement - arm swing exceeds 180 degrees, knee bend reaches 150 degrees, elbow bend reaches 135 degrees, and waist side-tilt approaches 90 degrees. Weapon Loadout: Each unit includes four guns (with linkable rifle magazines), one dagger, and four weapon mount connectors for hardpoint storage across the body. Four Interchangeable Hand Types: Open palm, grip, fist, and flat/barrier hands included per unit for a wide range of posing options. 3mm Universal Connection Ports: Standard 3mm hardpoints distributed across the body enable compatibility with 30MM, MSG, and other popular aftermarket accessory lines. Hidden Gate Mark Design: Many parts feature single gate points placed at connection seams, minimizing visible nub marks without additional cleanup. Builder Context The Fenrir A2 is designed for absolute beginners and assembles in approximately three minutes with snap-fit construction requiring no tools, adhesives, or painting. The 3mm port system and compact form factor also make it a strong customization base for experienced builders familiar with Bandai's 30 Minutes Missions line or Kotobukiya's MSG accessories. Why Build This Kit The Sheik Mainland 3MIN Project-A Fenrir A2 is the most accessible entry point into the third-party mecha kit category, with a sub-$30 price point that includes two complete units per box. Its 42-point POM articulation system delivers joint ranges that rival Bandai's RG line despite the kit's compact 11 cm height, making it one of the highest articulation-to-size ratios available in any current model kit. The 3mm universal hardpoints make every Fenrir A2 immediately compatible with 30MM and MSG weapon and armor accessories, which means builders can start customizing without committing to a more expensive or complex kit first. At roughly the same price as a single Bandai HG kit, the two-unit box format gives the Fenrir A2 a value proposition that no other 1/18 mecha kit currently matches in the North American market. Box Contents Fenrir A2 Standard Type model kit x 2 Guns x 4 (per unit, with linkable rifle magazines) Dagger x 1 (per unit) Weapon mount connectors x 4 (per unit) Interchangeable hands x 4 types (per unit): open palm, grip, fist, flat/barrier Display stand Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approx. 11 cm (4.33 in) Material ABS, POM (joints) Articulation 42 points Compatibility 3mm connection ports (30MM, MSG compatible) Available Colorways Blue, Green, Yellow, Purple, Limited Metallic Black Manufacturer Sheik Mainland Country of Origin China Age Recommendation 15+

Rosado Project RS-03 Starflower Lily MK3 The Rosado Project RS-03 Starflower Lily MK3 is a partially pre-painted 1/10 scale plastic model kit and the third installment in the original mecha musume series rosado Project. Produced as a collaboration between Hemoxian (Kakusei Jizou) and Earnestcore Craft (Wamosen) and distributed by Kotobukiya, Starflower Lily MK3 features a lily-themed modular armor system, a dual-form body with magnetic part-swapping, movable eyes on all three face parts, and extensive pre-painted components including plated flame effects and champagne-gold detail parts. Key Features Lily Petal Armor System - Armor-mounted modular system configurable between three modes: Skirt Armor Mode, Composite Shield Mode, and Particle Cannon Mode. All three combine into the Lily Cannon for a massive combined weapon display. Dual Body Configuration - Switch between Human Mimicry and Battle Form with three interchangeable face parts (Human, Battle, and Overload Mode) plus a blank face. Includes both mechanical and humanoid chest parts for further customization. Magnetic Part-Swapping - Built-in magnets on the head connection allow tool-free face swapping. Head lifts straight off for instant mode changes. Movable Eyes - All three face parts feature adjustable eye mechanisms with an included adjustment rod, a rare feature in assembly-type mecha musume kits. Plated Flame Effect Parts - The Overload Mode head includes color-shifting plated flame effect parts that display different colors under varying light angles. Dual Color Transparent Parts - Orange and blue transparent part sets included for full-body color customization across the figure and weapons. Heavy Duty Display Stand - Black gloss base with press-release angle lock, aluminum support rod, and screw-fixed rotating joint at the top. Stand connection point is hidden beneath the lily stamen detail on the skirt armor. Builder Context The Starflower Lily MK3 is a snap-fit kit with many pre-painted components, making it accessible to intermediate builders comfortable with runner-based assembly and water slide decal application. The build complexity is comparable to Bandai's HG or 30MS mecha musume kits, though the small high-heel foot design and slender limb proportions require more careful handling during assembly than typical mecha kits. No cement or painting is required, but panel lining and topcoating will improve the finished appearance. Why Build This Kit The Rosado Project RS-03 Starflower Lily MK3 stands out in the mecha musume kit market for its three-mode Lily Petal Armor system, which allows the skirt armor, shield, and cannon to combine into a single oversized Lily Cannon weapon - a display option that no competing mecha girl kit in this price range currently offers. The movable eye mechanism across all three face parts is uncommon in assembly-type kits and adds posing expressiveness that typically requires aftermarket eye decals on products like Kotobukiya's Megami Device or Frame Arms Girl lines. At approximately 20.5 cm tall with weapons reaching up to 40 cm in length, the Starflower Lily MK3 has significant shelf presence for a 1/10 scale kit, especially in the full Lily Cannon configuration. The built-in magnetic head-swap system and pre-painted detail parts mean builders get display-ready results without painting, which positions this kit as a strong option for anyone who enjoys Bandai 30MS kits but wants a more detailed, larger-scale mecha musume build with original IP. Box Contents Main figure parts (31 runners including 2 metal-coated and 1 holographic-coated) Interchangeable face parts x3 (Human Mimicry, Battle Form, Overload Mode) Blank face x1 Movable eye parts x3 pairs with adjustment rod Interchangeable chest parts x2 (mechanical and humanoid) Standard hand parts x3 pairs (relaxed, open palm, claw) Weapon-specific hand parts x7 pairs (fist, straight grip, angled grip, weapon-integrated grips) Close-Combat Spear (Starflower Spear) with dual-length aluminum rod options (12 cm / 15 cm) Pursuit Cannon (Starflower Cannon) with deployable sniper bipod Petal Armor Mount Module Composite Shield (Lily Shield) Lily Cannon combination parts Orange transparent parts set Blue transparent parts set (replacement) Champagne-gold pre-painted petal inner parts with orange replacement set Plated flame effect parts (for Overload Mode) Energy release foot stand parts (blue and orange) Gold foil water slide decal sheet Heavy Duty Display Stand with aluminum rod Weapon Rack Church-themed photo backdrop card Lenticular holographic character card Instruction manual Specifications Series rosado Project Product Number RS-03 Scale 1/10 Height Approx. 20 cm (to head) / 22 cm (to armor peak) Materials ABS, PVC (phthalate-free) Manufacturer Hemoxian (Kakusei Jizou) x Earnestcore Craft (Wamosen) Distributor Kotobukiya Sculptor ZKI Product Type Partially pre-painted plastic assembly model kit Recommended Age 15+

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Overview The Motor Nuclear BV-XH01 Xiang Yu is a plastic assembly model kit from Motor Nuclear's Valiant Grade (Xunyong / BV) line, part of the Legend of Star General series. Designated as the Lian Zhen Star Lord of Yu Heng Palace, Xiang Yu is inspired by the historical Hegemon-King of Western Chu and reimagined as an original mecha design featuring an aggressive silhouette with phoenix feather-inspired shoulder armor, bird-head motifs on the front skirt and ankle guards, and integrated clear parts throughout the structure. The Valiant Grade line represents Motor Nuclear's compact, budget-friendly entry tier - smaller in scale and part count than the flagship MNP kits, while retaining the brand's mechanical design language and articulation focus. Key Features Valiant Grade (BV) Line: Motor Nuclear's compact kit tier, delivering the brand's signature mecha aesthetics and articulation at a smaller size and lower price point than the standard MNP series. 14 Runners with Pre-Painted Details: Includes pre-painted gold runners and metallic green painted eye parts for display-ready color accuracy straight from the box. Integrated Clear Parts: Transparent components built into the frame accentuate internal mechanical detail and add visual depth to the finished build. POM Joint Components: Dedicated black POM runner provides durable, stable connection points across the frame's articulation joints. Overlord Spear (Ba Wang Qiang): Xiang Yu's signature polearm weapon features a hybrid spearhead-halberd design rather than a simple spear tip, reflecting the character's origin as a warrior-king. Aluminum Foil Sticker Sheet: Included for shoulder armor color detail, adding metallic accents without the need for paint or aftermarket decals. Four Pairs of Interchangeable Hands: Fists, relaxed hands, gripping hands, and angled gripping hands provide versatile display and weapon-holding options. Builder Context The BV-XH01 Xiang Yu is an entry-level kit with simple structure and smooth assembly flow, suitable for beginners. The 14-runner part count and snap-fit construction make it a quick, satisfying build that experienced builders can finish in a single sitting. Comparable in difficulty and scale to a Bandai HG kit, with no glue or paint required for a complete appearance. Sharp design elements on the armor are chamfered for safe handling. Gate placement is mostly standard and exposed, with a small number of hidden gates. Why Build This Kit The Motor Nuclear BV-XH01 Xiang Yu is the most affordable entry point into the Legend of Star General series currently available, priced well below the standard MNP-line kits like Bai Qi ($75+) or Zhao Yun ($160+) while still carrying Motor Nuclear's original mecha design identity. At 15.5 cm, Xiang Yu falls between 1/144 and 1/100 Gundam scale in height and sits comfortably alongside HG or small MG kits on a shelf, but offers a Chinese mythology-inspired aesthetic - complete with phoenix feather shoulder details and bird-head armor motifs - that is visually distinct from anything in the Gundam catalog. The 14-runner build with pre-painted gold and metallic green parts delivers a display-ready result without painting, making it a practical introduction to the Motor Nuclear brand for builders who do not want to commit to the larger, heavier, multi-session MNP kits. Unlike the SP-XH01 alloy action figure version of Xiang Yu, the BV plastic model kit does not include the greatsword or display base - it ships with the Overlord Spear as the sole weapon, though the stand connector is compatible with the SP version's base. Builders who enjoy the BV-XH01 can scale up to the MNP line with confidence that Motor Nuclear's engineering conventions and design language will carry over. Box Contents 14 runners (including pre-painted gold runners and black POM joint runner) Pre-painted metallic green eye parts Clear parts Overlord Spear (Ba Wang Qiang) weapon Four pairs of interchangeable hands (fists, relaxed hands, gripping hands, angled gripping hands) Aluminum foil sticker sheet (shoulder armor detail) Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Line Valiant Grade (Xunyong / BV) Model Number BV-XH01 Character Xiang Yu - Hegemon-King of Western Chu Character Designation Lian Zhen Star Lord of Yu Heng Palace Height Approx. 15.5 cm (6.1 in) Runner Count 14 Material ABS, POM Product Type Plastic assembly model kit (snap-fit) IP Original third-party mecha design Country of Origin China JAN 6972147749484

MS General MG-01 Zhao Yun x Cheng Huang Ver. 2.0 Model Kit The MS General MG-01 Zhao Yun x Cheng Huang Ver. 2.0 is a 1/10 scale plastic model kit from MS General's Syokon-Ki series, themed around characters from Romance of the Three Kingdoms and Chinese mythology. This updated version of the original MG-01 release features Zhao Yun, reimagined as a mecha girl warrior, alongside her companion divine beast Cheng Huang. Ver. 2.0 introduces new equipment including the Longdan Spear and Guerrilla Cannon armament system, along with expanded customization options through multiple 3mm connector ports. Key Features Four Pre-Painted Faceplates: Zhao Yun includes four pre-painted interchangeable expressions plus blank faceplates, using a simple and efficient swapping mechanism. Longdan Spear (Dragon Gall Spear): Signature weapon featuring a metallic strip on the handle and 3mm ports on both sides, allowing combination with the Guerrilla Cannon armament. Guerrilla Cannon Armament: Modular floating cannon system with a dedicated display stand for showcasing different configurations. Cheng Huang Divine Beast Mecha: Full beast-form mecha with wide-range swivel joints on neck and limbs, telescopic shoulder mechanisms for enhanced articulation, and an extendable torso and tail for lateral movement. Dual-Use Cheng Huang System: Cheng Huang can serve as a rideable mount for Zhao Yun or transform into wearable armor for the character. Optional Rear Thruster: Cheng Huang includes an installable rear thruster unit with adjustable mounting direction. Extensive 3mm Port System: Multiple 3mm connection ports throughout the body and weapons enable DIY equipment customization and future expansion. Five Connector Types: Kit includes five varieties of connectors for free combination between the main body, Guerrilla Cannon armament, and Cheng Huang. Decals and Stickers: Includes metallic green and silver reflective stickers along with a large quantity of marking decals for the character, divine beast, and weapons. Box Contents Zhao Yun character body components Four pre-painted interchangeable faceplates and blank faceplates Interchangeable hand parts (PVC) Cheng Huang divine beast mecha components Armor set components Longdan Spear with metallic handle strip Guerrilla Cannon armament parts and display stand Rear thruster unit and connector parts Five types of expansion connectors Metallic green and silver reflective stickers Marking decal sheet Metal parts (spear handle strip, display stand screws) Display base Instruction manual Specifications Brand MS General Series Syokon-Ki (Romance of the Three Kingdoms) Model Number MG-01 Product Name Zhao Yun x Cheng Huang Ver. 2.0 Scale 1/10 Height Approx. 18 cm (Zhao Yun) Materials ABS, PVC, POM, metal parts Joint Material POM (runners C and Z) Product Type Plastic assembly model kit Recommended Age 15+ IP Original design (Chinese mythology / Romance of the Three Kingdoms)

Ming Jiang Legend & Blue Whales 1/100 REA-03D Caracal Desert Tactics Mecha Model Kit The Ming Jiang Legend & Blue Whales 1/100 REA-03D Caracal Desert Tactics is a desert-themed variant of the REA-03 Lynx from the Blue Whale original mecha series. This version replaces the Lynx's military green with a full desert tactical color scheme and introduces structural upgrades that address the original kit's limited hip spread range, along with new tooling parts for reinforced assembly and an exclusive desert-themed water decal sheet. Ming Jiang Legend (MJZ Studio) is a Chinese manufacturer known for their Blue Whale line of original military-styled mecha kits, co-produced with Sunday Hobby / Blue Whales. Key Features Desert Tactical Color Scheme: Full recolor from the Lynx's military green to a desert sand and tan configuration designed for arid environment display themes. Structural Optimization: Revised hip and leg joint structure addresses the original Lynx's limited leg spread range, allowing wider stances and more dynamic ground-based poses. New Tooling Parts: Includes newly tooled reinforcement parts for improved structural integrity during and after assembly. LN-26 Ultra-Long-Range Sniper Railgun: Multi-mode shooting configuration with detailed barrel engravings and energy-flow surface patterns. Combined Maintenance Platform: Integrated maintenance and preparation platform with base bracket, robotic arm, and eight ground crew figures for hangar-style diorama displays. Exclusive Water Decals: Dedicated water decal sheet designed specifically for the Desert Tactics configuration. ABS + POM Construction: Main body uses ABS plastic with POM core joints for stable articulation and posing. Builder Context The REA-03D Caracal Desert Tactics is an intermediate-level snap-fit plastic assembly kit. No cement is required, though sanding nub marks and applying the included water slide decals will produce the best results. The build complexity and part count are comparable to Bandai MG-grade kits, and the included maintenance platform adds a diorama assembly element that extends the build time beyond a standard mecha kit. Why Build This Kit The Ming Jiang Legend REA-03D Caracal Desert Tactics is the recommended version of the REA-03 Lynx for builders who experienced or heard about the original's hip articulation limitations - the structural revisions in the Desert Tactics release directly address that issue. The desert color scheme gives the kit a distinct shelf identity separate from the Lynx, and the exclusive water decals mean completed builds are visually distinguishable even at a glance. At 1/100 scale with a 21.5 cm height to head, the Caracal has comparable shelf presence to a Bandai MG kit, but the included maintenance platform, robotic arm, and eight crew figures make it one of the few kits in this price range that ships as a complete diorama scene out of the box. Builders who already own the Lynx should note that aside from the color, structural fixes, and decals, the weapon loadout and accessory list are identical - this is not a new mecha design but an improved reissue in a different livery. Box Contents REA-03D Caracal Desert Tactics 1/100 mecha main body Mecha backpack x 1 Interchangeable hands x 3 pairs LN-26 ultra-long-range sniper railgun x 1 Beam rifle x 1 Combined maintenance preparation platform x 1 Base bracket x 1 Maintenance personnel figures x 8 Exclusive Caracal Desert Tactics water decal sheet x 1 Instruction manual Specifications Brand Ming Jiang Legend & Blue Whales / Sunday Hobby Series Blue Whale Model REA-03D Caracal (Desert Tactics) Scale 1:100 Height to Head Approx. 21.5 cm (8.5 in) Height to Shoulder Approx. 22.9 cm (9.0 in) Material ABS, POM Type Plastic assembly model kit

Product Overview The Anaheim Collectibles Model-01 EX-Adelais Alice-01EX[Ext] is a third-party MGSD-style plastic model kit based on the MSA-0011[Ext] Ex-S Gundam from Mobile Suit Gundam Sentinel. The kit reinterprets the Ex-S Gundam in super-deformed proportions with a full custom outer armor set, a built-in LED head unit, and the complete Ex-S weapon loadout including the beam smart gun and incom system. Anaheim Collectibles is a Chinese third-party brand whose debut product focuses on the ALICE AI system theme from Gundam Sentinel - the advanced artificial intelligence that could autonomously pilot the Ex-S Gundam. Key Features MGSD-Style Format: Super-deformed proportions standing approximately 12 cm tall, with mechanical detail density comparable to Bandai's MGSD line. LED Head Unit: Magnetically activated LED system inside the head with three modes - green constant light (first activation), red light (second activation), and off (third activation). No wiring or batteries visible externally. Full Color Separation: Accurate white, blue, yellow, and red color scheme achieved entirely through part separation - no painting required for a complete color-accurate build. Inner Frame Derived from MGSD Freedom: The internal skeleton is based on a modified MGSD Freedom Gundam frame, adapted with a complete custom Ex-S armor set and unique backpack structure. Beam Smart Gun: Full-length beam smart gun with articulated mechanical arm connection, extensible barrel tip, and secure lock-in mounting to the backpack. Incom System: Three incom hardpoints (head and both knees) with rigid wire accessories for deployed display poses. Beam saber hilts are integrated behind the knee armor. Opening Missile Bays: The shoulder-mounted propellant tank pods have been redesigned with opening missile bay doors - a creative departure from the original Ex-S design. Builder Context This kit is suited for intermediate builders comfortable with snap-fit assembly and minor part cleanup. Overall fit is tight throughout - the neck ball joint in particular may require light sanding and lubrication before assembly. A visible seam line may appear on the front leg armor depending on individual kit tolerance. The build experience is comparable to Bandai's official MGSD kits in terms of part count and joint complexity, with the added bonus of the LED head unit and incom wire accessories that Bandai's MGSD line does not currently offer. Why Build This Kit The Anaheim Collectibles Alice-01EX is currently the only MGSD-format kit based on the Ex-S Gundam from Gundam Sentinel, a mobile suit that Bandai has not produced in the MGSD line as of April 2026. At approximately 12 cm tall, the finished build is noticeably slimmer than standard MGSD kits like the Freedom or Destiny, which gives it a distinct silhouette on a shelf but may appear undersized next to stockier SD designs. The magnetic LED head unit with switchable green and red modes is a feature not found on any current Bandai MGSD kit, making the Alice-01EX one of the few SD-format kits with built-in lighting at this price point. Builders familiar with the Ex-S Gundam's lore will appreciate the incom hardpoints and beam smart gun, though the kit omits the relay incom discs that connect the wire segments in the original design. For builders considering this as an entry point into third-party MGSD kits, the tight assembly tolerance and clean color separation make it a lower-risk purchase compared to third-party kits that require cement or painting, though the overall build does lean slimmer and lighter than what the box art may suggest. Box Contents Plastic runner sets for Alice-01EX[Ext] main body LED head unit (magnetically activated, battery included) Beam smart gun with articulated arm connector Two beam saber effect parts (red) Three rigid wire accessories for incom display Connector joints for incom wires Water slide decal sheet MGSD-format display base with support arm Assembly instructions Specifications Brand Anaheim Collectibles (third-party) Product Name Model-01 EX-Adelais Alice-01EX[Ext] Kit Format MGSD (Master Grade Super Deformed) style Source Series Mobile Suit Gundam Sentinel Base Unit MSA-0011[Ext] Ex-S Gundam Height Approximately 12 cm (to head) Materials PS, ABS, POM (with alloy joint components) Assembly Type Snap-fit plastic assembly (no cement required) Paint Required No (color separation through molded parts) LED Feature Magnetic head unit - green/red/off modes Release Date April 2026

Ming Jiang Legend x Sunday Hobby First Emperor of Qin Ying Zheng 1/100 Scale Model Kit The Ming Jiang Legend x Sunday Hobby First Emperor of Qin – Ying Zheng is a 1/100 scale humanoid mecha assembly model kit depicting China's first emperor, Qin Shi Huang. The kit combines a high part count with an alloy and POM pre-built inner skeleton framework, a winding dragon accessory with interchangeable parts, and a dedicated Great Wall scene base to recreate the iconic "First Emperor Riding the Dragon" display. Key Features High Part Count: Approximately 1,700 total components, including the alloy and POM pre-built skeleton frame. 81 Runner Plates: 81 plastic runners excluding the pre-built alloy and POM skeleton (final count subject to production). Alloy + POM Pre-Built Inner Skeleton: Finished metal and POM composite frame included, providing structural rigidity and posability without additional assembly of the skeleton. Dragon Accessory with Interchangeable Parts: One dragon figure with two head variants and interchangeable limb styles for varied display configurations. Dedicated Scene Display Base: Includes a Great Wall base platform with Qin Palace base stand, enabling the signature "First Emperor Riding the Dragon" scene. Xuanniao Backpack Unit: Separate backpack accessory representing the mythological dark bird (Xuanniao), a symbol tied to the Qin dynasty's origin myth. Imperial Accessories: Includes the Qin King Sword, Imperial Jade Seal, and bamboo scroll for additional display detail. Approx. 5 kg Total Weight: Combined weight of kit, packaging box, and outer carton (one box per carton configuration). Included Components and Accessories Ying Zheng mecha main body x1 Xuanniao backpack unit x1 Dragon figure x1 (with two head variants and interchangeable limb styles) Qin King Sword x1 Imperial Jade Seal x1 Bamboo scroll x1 Great Wall scene base platform x1 Qin Palace base stand x1 Dragon base stand x3 Water slide decals x1 Alloy + POM pre-built inner skeleton (included in part count) Instruction manual Specifications Brand Ming Jiang Legend x Sunday Hobby Product Name First Emperor – Ying Zheng (始皇帝·嬴政) Scale 1/100 Type Humanoid mecha plastic assembly model kit Inner Frame Alloy + POM pre-built finished skeleton included Mecha Height Approx. 25 cm (head to toe, mecha body only) Total Part Count Approx. 1,700 (including alloy + POM skeleton) Runner Count 81 runners (excluding pre-built skeleton) Total Weight Approx. 5 kg (including packaging and outer carton) IP Original third-party mecha design

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Motor Nuclear Legend of Star General MNPQ-XH04 Gan Jiang SD Version Model Kit Motor Nuclear MNP-CR01 Blazing Stars Yuheng Star 6th Leader Advanced Type Huan Ci Model Kit The Motor Nuclear MNP-CR01 Blazing Stars Yuheng Star 6th Leader Advanced Type Huan Ci is a large-scale original mecha model kit from Motor Nuclear’s Blazing Stars series. Designed as a high-ranking leader unit, Huan Ci features an expansive full-equipment configuration, multi-system weapon loadout, and modular transformation-oriented engineering. Key Features Large Full-Equipment Scale: Fully equipped configuration reaches approximately 35 cm in height and 52 cm in overall length, excluding the display base. Dual-Form Design: The mecha supports two primary configurations, expanding its play and display options. Five Independent Weapon Systems: Equipped with a wide array of weapons, forming a comprehensive combat loadout. Modular Flight Assembly: Cockpit unit, thrusters, and weapon systems can be reconfigured and combined to form a flight-mode craft. Streamlined Mechanical Aesthetics: The entire design emphasizes flowing, aerodynamic lines suited for futuristic space combat. Storage-Integrated Display Base: Includes the updated Blazing Stars “Red Heat Five-Star” base with built-in storage for hand parts and accessories. X Expansion Compatibility: First Blazing Stars unit to include a Motor Nuclear X-series expansion component. X Expansion Component X-01 High-Mobility Foot Propulsion Unit Included Equipment and Components Huan Ci main mecha body components Five independent weapon system assemblies Detachable cockpit unit Thruster and propulsion components Red Heat Five-Star display base with storage functionality X-01 high-mobility foot propulsion unit Instruction manual Specifications Brand Motor Nuclear Series Blazing Stars Model MNP-CR01 Yuheng Star No.6 – Huan Ci (Leader Advanced Type) Primary Height Approx. 22 cm (main body only) Full Equipment Height Approx. 35 cm (excluding base) Full Equipment Length Approx. 52 cm Configuration Dual-form with modular flight assembly Product Type Plastic assembly model kit IP Original third-party mecha design

Endless Create SR-01 Shurado Series Byaki MGSD-Style Model Kit The Endless Create SR-01 Shurado Series Byaki is a compact, highly detailed mecha model kit designed in an MGSD-style format. Produced by Endless Create, this kit features super-deformed proportions combined with dense mechanical detailing, layered armor construction, and a display-focused silhouette. Based on preview materials and retailer listings, Byaki emphasizes sharp panel separation, angular armor geometry, and a stylized heroic profile. The design prioritizes visual impact while maintaining a manageable build size compared to full 1/100 releases. Key Features MGSD-Style Design: Super-deformed proportions combined with high mechanical detail density. Original Mecha Design: Not affiliated with Bandai or any Gundam intellectual property. Layered Armor Construction: Multi-panel armor layout with stepped surface depth. High Surface Detail: Panel lines and mechanical features molded directly into parts. Display-Oriented Proportions: Designed for shelf presence and posed presentation. Visible Equipment Byaki main body components Integrated armor-mounted mechanical details Stylized weapon and accessory components as shown in preview materials Specifications Brand Endless Create Series Shurado Series Model SR-01 Byaki Scale / Format MGSD-style (non-scale) Product Type Plastic assembly model kit IP Affiliation Original design (Third Party)