All Products

Mr.COLOR has long been regarded highly by modelers worldwide as a model paint that delivers an outstanding finish. A wide range of colors are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more. Size: 10ml UPS Ground Shipping Only

Mr.COLOR has long been regarded highly by modelers worldwide as a model paint that delivers an outstanding finish. A wide range of colors are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more. Size: 10ml UPS Ground Shipping Only

Mr.COLOR has long been regarded highly by modelers worldwide as a model paint that delivers an outstanding finish. A wide range of colors are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more. Size: 10ml UPS Ground Shipping Only

Mr.COLOR has long been regarded highly by modelers worldwide as a model paint that delivers an outstanding finish. A wide range of colors are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more. Size: 10ml UPS Ground Shipping Only

Mr.COLOR has long been regarded highly by modelers worldwide as a model paint that delivers an outstanding finish. A wide range of colors are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more. Size: 10ml UPS Ground Shipping Only

The RX-78NT-1 Gundam NT-1, nicknamed Alex, was a Newtype-use mobile suit created by the Earth Federation Forces. It was introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. By the time of the One Year War, the Principality of Zeon's lead Newtype researcher, Dr. Flanagan, had been conducting his research for more than ten years. In contrast, the Earth Federation Forces only began their Newtype research in August, U.C. 0079. This was because the EFF did not see the military value of Newtypes due to the small number of examples and low replicability.However, concepts similar to Newtype-use unit were still included as part of the RX Project. Based on existing research to improve mobile suit responsiveness, as well as reports from the Newtype pilot Amuro Ray and operating data from the RX-78-2 Gundam, the EFF began the development of a Newtype-use mobile suit with the goal of improved durability and responsiveness. For this purpose, the fourth RX-78 series unit was redesigned as a custom unit for Amuro Ray and received the new model number of RX-78NT-1.The Gundam NT-1's development was carried out by the Augusta Base, originally a facility that researched issues relating to soldiers' mental health, it was chosen because some of its researchers published essays proving the Newtype concept. For additional protection, it was equipped with a set of optional Chobam armor, earning it the nickname "Alex", which was derived from the model number prefix "RX" and the acronym "Armor Layered EXamination", the project name of its armor.To ensure the extra weight from the Chobam armor does not hinder its mobility, the NT-1 was designed with expanded propellant capacity in mind. Inspired by the Zeon concept of using the leg itself as a large vernier unit, it was fitted with propellant tank/sub-thruster hybrid units on its legs. It was also fitted with a large number of additional thrusters, both to improve its mobility and to compensate for the added weight of its armor.Thanks to its magnet coating and the use of a high-speed, large-capacity learning computer more advanced than the one used by the RX-78-2, the NT-1's responsiveness was more than three times that of existing mobile suits. In addition, it was also equipped with a panoramic cockpit and linear seat, two features that would eventually become standard on mobile suits, under the belief that they would enable a Newtype pilot to better make use of their expanded awareness.Finally, based on analysis of combat data from the RX-78-2 Gundam, it was pointed out that the loss or damage of hand-carried weapons may impact the mobile suit's combat ability, so the NT-1 was equipped with a pair of concealed 90mm Gatling Guns in its forearms.

The RX-79[G]Ez-8 Gundam Ez8 is a customized RX-79[G] Gundam Ground Type introduced in the OVA Mobile Suit Gundam: The 08th MS Team and is piloted by the main protagonist Shiro Amada. During the battle with the Apsaras II, Shiro Amada's Gundam Ground Type was heavily damaged, necessitating major repair and overhaul. Based on the combat data collected up until that point, as well as feedback from Shiro Amada himself, the Gundam received various modifications. The result became known as Gundam Ez8, short for "Extra-zero-8", which stood for "08th MS Team extra unit".The Ez8's chest armor received major changes. Its chest armor plating was made using two Zaku II shoulder shields welded together, which can flip open for easy maintenance and can withstand a direct hit from a Zaku II's 175mm Recoilless Rifle with only a few scratches. The multi-launcher and the chest-mounted vulcan gun were removed due to being considered unnecessary. Instead, a 12.7mm vulcan gun was mounted just below the chest armor.Due to high damage rates in the jungle, the Gundam's signature V-fin was replaced with a rod antenna mounted on the right side of the head. The snorkel camera was removed, and a pair of 35mm vulcan guns were mounted on either side of the head. Due to the lack of Luna Titanium armor material, extra armor was added to the forehead and around the chin for protection. Other changes include the addition of movable knee spikes, which ensure stability during firing, and an improved shield fitted with extra armor. Due to improved power balance, its backpack thrusters had a higher output despite being visually identical.Overall, as a result of the various modifications, the Ez8 was made lighter without significantly sacrificing durability. Though its basic performance was unchanged from the Gundam Ground Type, it was slightly superior in terms of mobility and communications ability.

The STTS-808 Immortal Justice Gundam is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. Using all previous operational data from the ZGMF-X19A ∞ Justice Gundam, the unit was designed incorporating convertible technology acquired by Orb through the MVF-M11C Murasame. It shares a frame with the STTS-909 Rising Freedom Gundam, as well as containing the same panoramic monitor cockpit and OS. The DF2Mk3 Skydart lifter system on the unit's back has greater thrust and mobility than the ∞ Justice Gundam's lifter. The name "Immortal" implies that this unit parallels the Eternal, support ship of the ZGMF-X09A Justice Gundam.Unlike its predecessors, the Immortal Justice Gundam is battery-powered, necessitating the use of various measures to conserve power for its energy-intensive loadout.

A surfacer containing a primer component. [Precautions for use] Store out of reach of children and be careful not to accidentally swallow or eat. Since it contains organic solvent, improve ventilation both during painting and drying. When spraying paint, be careful not to get it on people or objects. Wear a mask and gloves during handling to avoid touching the skin as much as possible. If it gets on your skin, wash it with soapy water. In case of contact with eyes, rinse with water. If you feel sick, rest in a clean air. Seek medical attention immediately if you experience pain or changes in appearance. Cover the remaining paint and do not store it in direct sunlight, near heaters, or in rusty water or humid places in cans to prevent damage. Do not apply in places with fire. Do not use for anything other than painting.

The ZGMF-X56S/α Force Impulse Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Shinn Asuka and later by Lunamaria Hawke. The ZGMF-X56S/α Force Impulse Gundam is the ZGMF-X56S Impulse Gundam equipped with the α Force Silhouette pack. The Force Impulse is a general purpose MS like the original Impulse, but has extremely high mobility under gravity and in zero gravity due to the Force Silhouette's high output thrusters and large wings. This pack also enables atmospheric flight, and adds a pair of beam sabers to the Impulse's standard armaments, granting the Force Impulse high melee and ranged combat capabilities. The Force Impulse is the most commonly used form of the Impulse due to its high versatility, and it is said that its aerial combat capabilities are equivalent to the ZGMF-X10A Freedom Gundam's. The Force Impulse retains the same VPS colors as the original Impulse.

Mrs. Loheng-Rinko from "Gundam Build Fighters" joins the HGBF model kit lineup from Bandai! She's fully posable after assembly and comes with 2 of the Lohengrin, 2 of the Gottfried Mk.71, 2 beam rifles, and a display stand; foil stickers are included for the markings.

The Gundam Perfect Strike Freedom Rouge, as seen in the "Gundam Build Series" 10th anniversary video "Gundam Build Metaverse," gets a new HG model-kit release from Bandai with "Perfect" equipment! The laser anti-ship sword Schwertgeber and the super high-impulse cannon Agni can be separated and combined. Combine them to create the large weapons Super Schwertgeber and Super Agni! The rocket anchor Panzer Eisen can be displayed in ejected mode with a lead wire; the super dragoon attached to the mobile weapon wing can be attached and detached. Various beam effect clear parts are included, too. Order this spectacular Gundam for your own collection today!

The Huckebein Mk-III Type-L (ヒュッケバインMk-III・タイプL) is a Banpresto Original Mecha debuting in Super Robot Wars Alpha. Part of the Huckebein Series, it was developed from the Huckebein Mk-II, with its brother unit being the Huckebein Mk-III Type-R. It can combine with the AM Boxer to form Huckebein Boxer or with the AM Gunner to form Huckebein Gunner. The Huckebein Mk-III was developed by Mao Industries as the successor of the Huckebein Mk-II, based around the concept of "a miniaturized high-performance SRX". Also known as a "Super Personal Trooper", it is equipped with a T-Link System and Uranus System similar to its predecessor, an improved Gravi-Con System allowing for better usage of Gravity Territory, as well as a new Tronium Engine. For the Mk-III, output regulation of the Tronium Engine isn't manually adjusted like the SRX but through the pilot interacting with the T-Link System instead. It adopts the Huckebein's H Frame and the Huckebein Mk-II's Personal Fighter module system, along with using various parts from the R-Series mecha. However, the Mk-III's most distinctive ability lies in the Core Trooper System, allowing the Mk-III to equip either the AM Boxer or the AM Gunner support modules to form either the melee-based Huckebein Boxer or the artillery-based Huckebein Gunner respectively, granting the mecha the ability to respond to various combat situations.

The PEN-01M Momokapool (モモカプル Momokapuru?) is a Gunpla introduced in the Gundam Build Divers anime. Based on the AMX-109 Kapool, it is built and piloted by Momo. A Kapool-based Gunpla used by Momo, and assembled by her with advice from Koichi Nanase, but she rejected custom plans that are not cute. The kit's custom style focused not on firepower or mobility, but solely on "Kawaii Power".It has been customized with a cute penguin motif, and contains a mini Kapool, the Petitkapool, making it more adorable. The Kapool's missile launchers have been removed because they weren't so cute, and the unpleasant sharp tips of its iron nails have been rounded off, reducing its attack power. However, its speed and strength/durability have both been greatly improved as a side effect of pursuing ultimate cuteness.Like its base Gunpla, the Momokapool can transform into a cruising form by retracting its arms and lowering its head, but Momo gave it a more literal name, 'Ball Mode', based on its appearance. The Ball Mode boasts improved cruising capabilities, and can be used for dodging as well as other various ways, including using itself as a kinetic weapon as seen with its 'Rolling Attack'. Since the Momokapool is incapable of flight, it needs help from its teammates, such as riding on top of the RX-零 RX-Zeromaru's Armed Armor Hattori, when aerial travel or combat is necessary.Two years later, Momo is seen using a Momokapool with a color scheme of black, white and pink. Although the full details of this Gunpla is unclear, it seems to retain the Ball Mode, the Petitkapool, and has the same inability to fly. It is known to have a weapon called the Hyper Belly Beam and a unique data-gathering feature, the "Penguin Research".

The RGM-79 GM is a mobile suit that appears in the manga Mobile Suit Gundam: The Origin. A mass-produced MS of the Earth Federation Forces manufactured in Jaburo. Unlike the Guncannon, which specialized in medium-range firepower support without focusing on MS battles, this machine is based on the RX-78-02 Gundam, which was basically designed as a multirole machine that can be equipped with various equipment changes depending on the battle situation, such as anti-ship and anti-fighter battles, while assuming MS battles as its "main weapon". In order to rebuild the strength of the Federation Forces as quickly as possible, its structure was simplified and costs were reduced with an emphasis on productivity, so it is a step behind the Gundam, especially in armor strength and reaction speed. Even so, it has become an MS with sufficient performance to serve as a mainstay weapon, and with data from actual battles with the Gundam inherited, it has been completed as a machine with specifications that exceed those of the Zaku II, albeit slightly. It is also equipped with a beam spray gun and a core pod as standard equipment, making it suitable for pilots with low skill levels.

The PFF-X7II+/P9 Plutine Gundam (プルタインガンダム Purutain gandamu?) is a Gunpla introduced in Gundam Build Metaverse. A variant of the Core Gundam II Plus, it is built and piloted by Hiroto Kuga. A dueling version of Hiroto's Core Gundam II Plus formed by docking it with the Pluto Armor. When Hiroto learned about Ecopla, a project which utilizes recycled materials, he saw a connection between it and Pluto, the planet of destruction and regeneration. This inspired him to create the ninth unit of the PLANETS System. The exterior of the unit utilizes the specially coated "EP Armor". This black-colored armor can convert kinetic energy released by the unit as well as from nearby enemy into supplemental energy, allowing for significant improvement in combat sustainability. The combination of the EP Armor with equipment specialized for hand-to-hand combat, makes the Plutine Gundam suited for repeating destruction and regeneration in close-range battles.

SNAA 1/100 YR-02 Emperor Series Blade King Model Kit The SNAA 1/100 YR-02 Blade King is a highly detailed, poseable original mecha kit from SNAA’s Emperor Series. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. Designed with a Master Grade-sized presence, the kit features a fully movable internal skeleton, strong color separation, and a display-oriented design supported by a reinforced display base. Key Features Scale and Size: 1/100 scale, approximately 21 cm tall to the top of the head (antenna height not included). Internal Structure: Built with a fully movable internal skeleton for dynamic posing. Detailing: Clean color separation and layered part division for a sharp mechanical appearance. Markings Included: Standard water decals included. Display Support: Includes a reinforced display base designed to support action poses. Backpack Gimmick: The bladed components mounted on the backpack can be combined with the shield to form multiple configurations, allowing for varied display and play options. Box Contents Blade King main body parts Shield and backpack blade components Reinforced display base Standard water decals Instruction manual Specifications Brand SNAA Series Emperor Series Model YR-02 Blade King Scale 1/100 Height Approx. 21 cm (head height, antenna excluded) Markings Water decals Display Base Reinforced base included

Mr.Masking Sol R contains a new formulation which can be readily applied, cut, and removed after use. This product has the same characteristics as the previous Mr.Masking Sol M131, which is no longer manufactured.　It is a water-soluble product, so when it thickens during usage, you can thin it out with tap water for extended use.*Apply MASKING SOL where you need it evenly with a brush.*After it dries within 20~30min., it becomes translucent film.*Cut unnecessary parts away neatly with a design knife, etc. leaving masked parts, and then apply paint.*When the paint has dried completely after painting, peel off MASKING SOL.*MASKING SOL is water soluble, so wash out brushes with water.

The RX-78GP03 (RX-78GP03D) Gundam "Dendrobium" (aka Dendrobium, GP03) is the third unit of the Gundam Development Project, and the combination of the mobile suit unit - the RX-78GP03S Gundam "Stamen" - and the armed base "Orchis". It was introduced in the OVA series Mobile Suit Gundam 0083: Stardust Memory and also featured in Episode 4 of Gundam Evolve. It was initially piloted by Anaheim test pilot Defrah Kar, and later by Federation MS pilot Kou Uraki. The goal of the Gundam Development Project was to create the most powerful mobile weapon. To that end, Unit 1 focused on maximizing the maneuverability and mobility of a mobile suit, while Unit 2 sought to combine the strongest mobile weapon with the strongest strategic weapon. Finally, Unit 3 sought to combine the versatility of a mobile suit with the heavy firepower of a mobile armor.Developed for base defense in space, the Gundam "Dendrobium" consisted of two parts: the mobile suit Gundam "Stamen" and the Armed Base "Orchis". The "Orchis" was essentially a massive mobile arsenal, featuring a variety of weapons and allowing the "Dendrobium" to switch to different weapons after deployment for different battle scenarios, from long range to close range combat. In addition to its massive array of weapons, the "Orchis" also boasted impressive mobility thanks to its large propellant capacity, and was able to rival a Zeon mobile armor in combat abilities. It was also equipped with a large I-Field generator on its right side for protection against beam weapons.

The ZGMF-X23S Saviour Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Athrun Zala. The ZGMF-X23S Saviour Gundam is one of ZAFT's five Second Stage Series mobile suits, and like other machines of the series, it inherited the basic performance of the ZGMF-X10A Freedom Gundam and the ZGMF-X09A Justice Gundam, making it superior to the ZAFT's mass production MS in CE 73, the ZGMF-1000 ZAKU Warrior. The design of the Saviour Gundam emphasizes mobility, and not only does it demonstrate high aerial combat capability in MS mode due to its two large wings, it can also transform into a fighter jet-like mobile armor (MA) mode, which has higher acceleration and cruising speed.With sensor-type devices mounted at the top, the Saviour's head is reminiscent of the GAT-X303 Aegis Gundam's. The Saviour excels in hit-and-run attacks using a combination of its MS and MA modes and is armed with a beam rifle, a shield, two beam sabers, two CIWS guns, two machine guns as well as a pair of beam and plasma beam cannons. It can also operate in space and is equipped with a new form of Phase Shift armor known as Variable Phase Shift armor as well as a battery that can be recharged during battle using the Deuterion Beam Energy Transfer System. As with the ZGMF-X24S Chaos Gundam, the Saviour Gundam is based upon a similar prototype unit, in this case the ZGMF-YX21R Proto-Saviour.