All Products

Width x Length: 30cm x 20cm Base Height: 3cm Ring Size: 30cm

The GAT-X131 Calamity Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by "Biological CPU" Orga Sabnak. One of three second-generation GAT-X machines, Calamity is built on the X100-series frame and inherits GAT-X103 Buster Gundam's artillery attack concept. It can also be used to provide support from the rear and is armed with several powerful range weapons, but it completely lacks any close combat weaponry. Its armament consisted of two back-mounted high-energy long-range beam cannons, a chest-mounted multi-phase energy cannon, 2-barrel ram cannon equipped shield attached to the left arm and a hand-carried plasma-sabot bazooka. Due to its Trans-Phase armor, a more energy-efficient form of the Phase Shift armor, Calamity has a longer operational time than the first generation GAT-X machines and also has more energy for its power-hungry beam weapons. With the powerful thrusters installed around the body, it can hover over deserts or bodies of water easily. However, as it lacks true flight capability within the atmosphere, it often has to ride on top of GAT-X370 Raider Gundam when the latter is in MA mode to keep up with its flight-capable sister units when moving to the combat zone. In this configuration, Calamity uses Raider much like ZAFT suits use the Guul subflight lifter. The control system of the Calamity is very complex and its customized OS can only be used by the "Biological CPU".

The GAT-X303 Aegis Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by Athrun Zala. Designated as the commander unit of the Alliance's G Project due to its enhanced communication and analysis capabilities, Aegis also has heavy attack power as well as Phase Shift armor and can transform into a mobile armor (MA) due to its X300-series frame. In MA mode, it has two different sub modes, 'Cruise' and 'Attack'. When in 'MA Cruise Mode', Aegis has higher speed and acceleration, while in 'MA Attack Mode', it can destroy enemy ship/mobile suit with its "Scylla" 580mm energy cannon directly or grab onto them with its four limbs first then destroy them using the cannon. Other weaponry includes two head-mounted CIWS, a hand-held beam rifle, a shield and a beam saber in each limb.Aegis also has a large sensor unit at the top of its head and unlike most suits, its main thrusters seem to be located in the side binders on its waist. Due to the transformation system, Aegis's internal structure is more complex and it is for this reason that there are no mass production variants of the suit. The three different modes (MS Mode, MA Cruise Mode and MA Attack Mode) also means that Aegis's pilot needs to have higher skills to be able to use the suit effectively.

The YMF-X000A Dreadnought Gundam (aka Dreadnaught, X Astray) is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED X Astray. Its main pilot is Prayer Reverie. Based on technology stolen from the Earth Alliance, the Dreadnought was jointly developed by PLANT's three primary military design bureaus: Clarke, Asimov, and Heinlein. It was a testbed for ZAFT's newly developed Neutron Jammer Canceller, which allowed the use of nuclear power under Neutron Jammer interference, making it the first mobile suit to be powered by a nuclear engine. The Dreadnought's Neutron Jammer Canceller was installed in its head, unlike the later nuclear-powered mobile suits that were developed using its data. Therefore, while its head was a custom made, Gundam type head, its body reused many parts from the ZGMF-600 GuAIZ to shorten its development time. Additionally, several of its weapons were based on those used by the GuAIZ.Due to its prototype nature, the Dreadnought's Neutron Jammer Canceller has a greater effective range than later units. Instead of being confined to the Dreadnought's nuclear engine, it also allowed nuclear reactions to occur nearby. Taking advantage of the nuclear engine's high output, the Dreadnought was equipped with the Phase Shift armor and the new DRAGOON System, both of which consume massive amount of power. In case the Neutron Jammer Canceller is missing or inoperable, the Dreadnought could still function using its internal battery, though it was unable to use the Phase Shift armor in this state.The DRAGOON System (Disconnected Rapid Armament Group Overlook Operation Network System) is similar in concept to the Wired Gunbarrels equipped by the Alliance's TS-MA2mod.00 Moebius Zero, but its remote weaponry are controlled wirelessly via quantum communication, which is immune to the Neutron Jammers' disruptive effects. The power intensive nature of the DRAGOON System is attributed to the quantum communication. Like the Wired Gunbarrels, the DRAGOON System can only be operated by pilots who have a high level of spatial awareness. Initially, the Dreadnought's remote weaponry only consisted of two waisted-mounted XM1 "Pristis" Beam Reamers, it gained more remote weaponry when a large, X-shaped backpack armed with four DRAGOON units was later mounted onto the mobile suit.The word 'Dreadnought' means a fearless person, and officially, it was selected as the name of this mobile suit to convey the wish that it would be a fearless machine that protects the PLANTs. However, at the development site, it was joked that the name refers to the mobile suit's pilot, who borne increased risk as the machine has a dangerous nuclear engine. Despite this joke, the Dreadnought is said to be safe as sufficient protection is built-in. With the X-shaped backpack, the Dreadnought is also called 'X Astray', but it is unrelated to the Astray series mobile suits. The 'X' is a reference to the shape of its backpack, while 'Astray' is derived from the fact that although the Dreadnought was meant to be a weapon for killing, its pilot, Prayer Reverie, wanted to use it for saving lives instead.

GAT-01A1+AQM/E-X04 Gunbarrel Dagger is a mobile suit introduced in the original design series Mobile Suit Gundam SEED MSV. It is most notably piloted by Morgan Chevalier. A variant of the GAT-01A1 Dagger (aka 105 Dagger) piloted by the "Moonlight Mad Dog", Morgan Chevalier. The Gunbarrel Dagger mounts the AQM/E-X04 Gunbarrel Striker as a Striker Pack, granting the suit usage of the remote controlled Wired Gunbarrels (which could only be controlled by individuals with high spatial awareness, like Morgan) and perhaps the Striker's Gatling gun, in addition to the Dagger's standard weaponry. The Gunbarrel Striker can be automated or piloted, and if it is the latter, the front section can be detached after the Striker Pack docks to the Dagger's back, which make sense as the unit's pilot is useless after the pack docks with the MS. In fact, this is what Morgan often does if the pack is delivered in battle by a pilot. As the wires of the wired gunbarrels can be easily severed during combat, a backup Gunbarrel Striker is always prepared in advance and send out when almost all the wired gunbarrels have been severed or destroyed.

The GINN High Maneuver Type is a mobile suit introduced in the original design series Mobile Suit Gundam SEED MSV. A variant of the ZGMF-1017 GINN, the GINN High Maneuver Type was created to extend the lifespan of the GINN series and to fill the gap before deployment of the ZGMF-600 GuAIZ. It was also tuned for ace pilots. Due to the new backpack and the addition of vernier thrusters all over the body, the mobile suit has improved maneuverability, acceleration and traveling range in space. Its turning speed is also improved by 180% and to handle the increased stress, its joints are strengthened by 30%. The suit's developers placed a high priority on reliability and productivity, and as such only battle-proven technologies are used. A good example of this is that the new backpack utilize the MMI-M729 Thruster Engine that was widely used by battleships.Ace pilots that received the GINN High Maneuver Type were very satisfied with its performance. Although only a limited number of the machine were produced by the time GuAIZ was deployed, the fact that it has the same operability as the GINN and shares many parts with it, making maintenance and repair work simple, caused it to be strongly supported by many soldiers and calls for it to be assigned to the front lines remain high. Weapons wise, the GINN High Maneuver Type is typically equipped with a JDP2-MMX22 experimental 27mm armor assault rifle, which mounts a MA-M3 heavy blade for close combat.

The MBF-P03 Gundam Astray Blue Frame is a Mobile Suit introduced in the manga series Gundam SEED Astray and featured in the photo-novel Mobile Suit Gundam SEED Astray B. It is piloted by Gai Murakumo. The MBF-P03 Astray Blue Frame was one of five identical prototype combat mobile suits developed using stolen data from the Earth Alliance's G Project and was designated for testing optional equipment. Its computer contains data and blueprints for various optional equipment. Most of the technology from the G Project was successfully copied with the exception of Phase Shift armor. In its place the Astrays' designers made the machines out of a lighter foaming metal compound and were built with minimal armor over the frame. This made the Astray mobile suits lighter and faster than their G Project counterparts.Originally, the Astray Blue Frame was armed with the standard armament of the other prototype Astray suits. These weapons include two head-mounted "Igelstellung" 75mm multi-barrel CIWS, two back-mounted beam sabers for close combat, a Type 71 beam rifle, and a single physical shield. However its mercenary pilot used his resources to outfit the Astray Blue Frame with a wide variety of equipment to suit multiple combat situations and to meet the needs of different mission. Like the other prototype Astray suits, Astray Blue Frame's backpack can be lowered to the back skirt armor, allowing the mounting of additional equipment on its back.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ Uingu Gandamu Zero?) (aka Wing Zero, Wing 0, or just Zero) is a mobile suit that appears in Mobile Suit Gundam Wing. Wing Zero was the first Gundam designed by the five engineers who had developed the OZ-00MS Tallgeese. Around A.C. 175, the MS, which was developed as a "weapon" by OZ, began to evolve as an epoch-making mobile weapon based on the Tallgeese (Prototype Leo). Meanwhile, several engineers that were at the core of the Tallgeese development ran away from OZ to develop even higher performance MS. Five of them gathered to develop a MS that would adopt "technology and materials that did not yet exist at that point in time", including "Gundanium", which was a cutting-edge material at that time. Having been developed in light of the Tallgeese's failure, it became a dreadful machine equipped with an interface that transcended the limits of the pilot. That is "Wing Zero", and the material adopted gave it the code name "Gundam". By transforming into Neo Bird Mode, high-speed cruising is possible; in addition, the Twin Buster Rifle has the power to destroy a space colony in a single hit.Wing Zero's head unit is an aggregation of various sensors and head Vulcan Guns are not equipped. Its chest unit is equipped with the main generator and a "ZERO System" built-in type cockpit. The ZERO System also turned out to be what the five engineers feared the most as it forced the pilot to achieve the "perfect victory". The five engineers, harboring a fear of the dimension of Wing Zero's excessive destruction coefficient (in practice, the parts with the required specifications could not have been supplied at that point in time), suspended the machine's development and sealed its design data. In hiding, the five engineers who had returned to their respective base colonies would develop five "Gundams" that could be said to be unique Wing Zero-derived machines. And then in A.C. 195, the seal was broken by Quatre Raberba Winner, one of the five Gundam pilots who had carried out Operation Meteor; and Wing Zero, which had been impossible to build at the time of its design, is born.

The Gundam Hajiroboshi (ガンダム端白星) is the main mobile suit of the Mobile Suit Gundam IRON-BLOODED ORPHANS Urdr-Hunt mobile game. It is piloted by Wistario Afam. A Gundam Frame mobile suit that was stored for many years in the administration sector of the Radonitsa Colony floating above Venus. It is unclear when and why the Hajiroboshi was brought into the remote colony, and with the person who discovered it long gone, no one knows why it has been preserved to this day. Additionally, the name "Hajiroboshi", which means Venus in an old language, is not found in the list of the 72 Gundam Frame mobile suits developed during the Calamity War. This name also does not follow the usual naming conventions.There is evidence that this mobile suit underwent major refurbishments, with most of its armaments other than its Gundam Frame made with modern technology. The Hajiroboshi has excellent maneuverability, and the high output produced by its dual Ahab Reactors are its greatest weapons. However, like the other Gundam Frame mobile suits, Hajiroboshi normally operates at a drastically reduced output due to a specially programmed limiter, but this limiter would automatically turn off upon encountering a Mobile Armor. While this allowed the Hajiroboshi to display its power, it also made the mobile suit difficult to control in the absence of the Alaya-Vijnana System. Uniquely, another operating system would also activate, revealing the sigil of Marchosias along with the text "Gundam Frame Type Marchosias ASW-G-35" on its interface.The Hajiroboshi was initially equipped with various lightweight armaments made with consideration for the mobile suit's mobility and were designed to be easy to control for its pilot, Wistario Afam. After this 1st Form was damaged in combat with a Mobile Armor, Hajiroboshi was repaired and reequipped at the Radonitsa Colony, becoming the 2nd Form. Besides a new backpack with built-in wire anchors, the 2nd Form also has new armaments in preparation for fiercer battles to come.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output. The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.

The 侍ノ弐 Sengoku Astray Gundam (戦国アストレイ頑駄無 Sengoku Asutorei Gandamu) is a Gunpla that appears in the anime Gundam Build Fighters. Based on the MBF-P02 Gundam Astray Red Frame it is built and controlled by Nils Nielsen. Based on the MBF-P02 Gundam Astray Red Frame that appeared in the Gundam SEED Astray series, this Gunpla is built by Nils Nielsen and embodies his love of his Japanese heritage. Aesthetically, it greatly resembles a samurai, with an enlarged V-fin that is modeled after the Crest-horn and additional facial scrupling that is modeled after a men. The Red Frame's original faceplate is hidden underneath this extra plating and can be revealed if the extra plate is destroyed. Armed with two swords and a shield, the Sengoku Astray is also uparmored, with the new shoulder armor containing a pair of hidden arms and thrusters at the back. With its swords, the Sengoku Astray can not only launch shock waves, but also cut through beam attacks and particle barrier. The Gunpla has a special melee attack, the ‘Particle Fa Jin', that allows it to destroy an opponent from within.

The GN-10000 Transient Gundam Glacier is a Gunpla from Gundam Build Fighters Honoo Try. It is built and piloted by Lindsey Anegaozy. This Gunpla was created using the GN-9999 Transient Gundam as a reference. Boasting the GN Drive technology of the Mobile Suit Gundam 00 series, the Transient Gundam Glacier has impeccable particle control, and specializes in freezing capabilities. Its freezing attacks are due to the storage of particles at near absolute zero temperatures in the purple crystals around the Gunpla's body. Lindsey claims that the Transient Gundam Glacier is capable of overpowering Kijima's original unit, although the two never actually battled.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output.[1] The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.

The XXXG-01Wfr Gundam Fenice Rinascita is a custom Gunpla and the successor of the XXXG-01Wf Wing Gundam Fenice from the anime series, Gundam Build Fighters. The Gunpla is modeled and primary controlled by Ricardo Fellini. The XXXG-01Wfr Gundam Fenice Rinascita is the upgraded form of Ricardo Fellini's XXXG-01Wf Wing Gundam Fenice after it was severely damaged during his loss to the Qubeley Papillon at the semi-finals. The Gundam Fenice Rinascita is greatly modified compared to its predecessor, the trademark asymmetrical design has been forgone entirely and it sports new custom parts all over its body. The suit also gained several new weaponry, and its transformation capability has been restored as well. The latter allows Gundam Fenice Rinascita to carry out high speed travel after changing into Flight Mode.

The PF-78-3A Gundam Amazing Red Warrior is a Gunpla from the anime series Gundam Build Fighters Try. It is a variant of the PF-78-3 Perfect Gundam III. Built by Meijin Kawaguchi for his own use, the Gundam Amazing Red Warrior is a customized version of the PF-78-3 Perfect Gundam III "Red Warrior" that appears in the manga Plamo-Kyoshiro. This Gunpla is also the Meijin's way of honoring Takeshi Iori, who had used the Perfect Gundam. The Gundam Amazing Red Warrior can exhibit overwhelming speed during battle due to its greatly improved thrust, and has high maneuverability thanks to the flexibly mounted vernier units above the shoulder armors. The weapon mounted on the left side of the backpack can be changed to meet the needs of different battle, and this allows the suit to be highly adaptable. The combination of the Gunpla's high degree of completion and the Meijin's excellent piloting skills caused the Gundam Amazing Red Warrior to be a formidable foe for any opponent.

The PF-78-3A Gundam Amazing Red Warrior is a Gunpla from the anime series Gundam Build Fighters Try. It is a variant of the PF-78-3 Perfect Gundam III. Built by Meijin Kawaguchi for his own use, the Gundam Amazing Red Warrior is a customized version of the PF-78-3 Perfect Gundam III "Red Warrior" that appears in the manga Plamo-Kyoshiro. This Gunpla is also the Meijin's way of honoring Takeshi Iori, who had used the Perfect Gundam. The Gundam Amazing Red Warrior can exhibit overwhelming speed during battle due to its greatly improved thrust, and has high maneuverability thanks to the flexibly mounted vernier units above the shoulder armors. The weapon mounted on the left side of the backpack can be changed to meet the needs of different battle, and this allows the suit to be highly adaptable. The combination of the Gunpla's high degree of completion and the Meijin's excellent piloting skills caused the Gundam Amazing Red Warrior to be a formidable foe for any opponent.

The PPGN-001 Gundam Amazing Exia is a custom Gunpla from the anime series, Gundam Build Fighters, and is based on an incomplete Gunpla developed by Plavsky Particle System Engineering. It is piloted by Meijin Kawaguchi. Originally an incomplete Exia based Gunpla codenamed A5, it is modified into its current form by Allan Adams and Meijin Kawaguchi. However, the Gundam Amazing Exia was only 80% complete when it was used in the semi-finals, and some of its system was not yet fully adjusted. The incomplete Gundam Amazing Exia is armed with an Amazing GN Sword, an Amazing GN Shield as well as the wrist mounted GN Vulcans. It also has a Trans-Am System installed for dire situations. The completed form of Amazing Exia has an additional sword stored on the hip and a Trans-Am Booster on its back, which not only improve the suit's performance but also stores an extra pair of handheld blades.

The 侍ノ弐 Sengoku Astray Gundam (戦国アストレイ頑駄無 Sengoku Asutorei Gandamu) is a Gunpla that appears in the anime Gundam Build Fighters. Based on the MBF-P02 Gundam Astray Red Frame it is built and controlled by Nils Nielsen. Based on the MBF-P02 Gundam Astray Red Frame that appeared in the Gundam SEED Astray series, this Gunpla is built by Nils Nielsen and embodies his love of his Japanese heritage. Aesthetically, it greatly resembles a samurai, with an enlarged V-fin that is modeled after the Crest-horn and additional facial scrupling that is modeled after a men. The Red Frame's original faceplate is hidden underneath this extra plating and can be revealed if the extra plate is destroyed. Armed with two swords and a shield, the Sengoku Astray is also uparmored, with the new shoulder armor containing a pair of hidden arms and thrusters at the back. With its swords, the Sengoku Astray can not only launch shock waves, but also cut through beam attacks and particle barrier. The Gunpla has a special melee attack, the ‘Particle Fa Jin', that allows it to destroy an opponent from within.

The High Grade Build Fighters (HGBF) GAT-X105B/ST Star Build Strike Gundam (Star Build Strike Gundam Plavsky Wing) is a 1/144 scale kit released in 2014.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output.[1] The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.