All Products

The RX-78-01[N] Gundam Local Type (North American Type) (RX-78-01[N] 局地型ガンダム（北米戦仕様） Kyokuchi-gata Gandamu (Hokubei-sen Shiyō)?) , also known as the RX-78[N] Black Local Type Gundam (RX-78[N] 黒い局地型ガンダム?) , is a prototype mobile suit introduced in the Mobile Suit Gundam: The Origin MSD: Cucuruz Doan's Island manga.Before the One Year War broke out, the Earth Federation Forces promoted the "RX Plan" with the RX-78-01[N] Gundam Local Type, a prototype machine for environmental testing on Earth. During ground testing, the yellow colored unit was fitted with a Shoulder Cannon-equipped backpack. During offshore testing, the suit was retrofitted with underwater equipment and painted in a white and blue color scheme. In the MSD files, a black "unidentified unit" similar to the Gundam Local Type was encountered by Principality of Zeon forces.

The MS-06R Zaku II High Mobility Type (Reuse "P" Device) (aka Psycho Zaku) is a prototype mobile suit from the manga Mobile Suit Gundam Thunderbolt and its animated adaptation. It is piloted by Daryl Lorenz.The MS-06R Zaku II High Mobility Type (Reuse "P" Device) is a mobile suit operated by the Zeon army's Living Dead Division. An experimental unit equipped with the “Reuse P (Psycho) Device” - a next generation operating system that has the potential to operate a mobile suit's limbs by communicating to the drive system of the mobile suit directly via thoughts. Even individuals with little piloting experience can master the controls in a short period due to this system. Although Ensign Daryl Lorenz is the pilot of the Psycho Zaku and his main mission is to snipe from ultra-long ranges, to pilot the unit, a high proficiency of control is necessary. It is believed that some training time is necessary, however it was pressed into combat so the training was cut extremely short thanks to the device. In order to draw out 100% of its abilities, the pilot must be quadruple amputee to fully interface with the mobile suit.

The MS-06R-1A Zaku II High Mobility Type is a mobile suit featured in Mobile Suit Gundam: The Origin. The Principality of Zeon's Black Tri-Stars used them during the One Year War. When the mass production system of the highly versatile C Type was refined in anticipation of the war of independence, the Principality forces began developing MS-06 Zaku II types adapted for local warfare, which were specialized for particular combat situations. The first of these to be completed was the MS-06R-1A Zaku II High Mobility Type. In this machine, versatility was abandoned, and improvements were made to increase its mobility for combat in outer space. Its large backpack was fitted with an extra propellant tank, which could hold a greater supply of quickly consumed propellant. Three large acceleration thrusters were added to each leg to further boost its mobility.

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

The RGM-79C GM Type C (also known as GM Kai and GM Late Type) is a mass production mobile suit based on the RGM-79[E] GM Early Type. It was introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. Based on the late production type of the RGM-79 GM, the GM Type C features improved generator output and incorporates several new technology, such as sensor and devices from the GM D type and G type. Its various components were all designed to maximize reliability, ease of production, ease of maintenance, and ease of modification. It was intended to achieve the goals originally set by Operation V.

Gunpla-kun is here in color! Gunpla-kun is made of LIMEX -- a new material that combines environmental consideration with the fun of plastic model kits! LIMEX ia a new eco-friendly material that contains more than 50 percent limestone as the main raw material, greatly reducing the use of conventional petroleum-derived plastics. This is the first time in history that LIMEX has been molded in full color! You can build Gunpla-kun into a full figure as shown here, or you can assemble him partially with some of the parts still on the runners and display him that way! He comes with his familiar armaments, such as the beam rifle, beam saber and shield.

The MSZ-006 Zeta Gundam was the titular mobile suit of the anime Mobile Suit Zeta Gundam. It was also featured in the sequel series Mobile Suit Gundam ZZ. Developed as part of Project Zeta, a third generation mobile suit development plan launched by Anaheim Electronics upon request from the AEUG, the Zeta Gundam was a revolutionary Transformable Mobile Suit (TMS). While Anaheim's previous attempt at creating a TMS, the MSN-001 Delta Gundam, failed due to issues with its transformable movable frame, the Zeta Gundam solved this problem by studying the design concept of the RX-178 Gundam Mk-II's movable frame, which had an excellent basic design. In addition, it adopted Gundarium γ alloy armor, previously used on Anaheim's RMS-099 Rick Dias.The Zeta Gundam was capable of transforming into a cruising mode known as "Wave Rider Mode". In this form, the Zeta Gundam adopted a wedge shape, concentrating the shockwave generated by supersonic flight underneath it and riding the resulting wave, hence its name. In this form, it was capable of entering the atmosphere without any optional equipment thanks to the Flying Armor mounted on the movable frame on its back, which protected it from shockwave and heat during atmospheric entry. The Flying Armor was based on data from the support vehicle of the same name, and could be replaced with other equipment, such as the Wing Binders for the Wave Shooter specification. The Wave Rider Mode could also function as a sub-flight system for other mobile suit.Due to the Zeta Gundam's complex transformation mechanism, it was impossible to mount generators in its upper body. Instead, it was equipped with a generator in each shin, a design concept inspired by the RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern. Its legs were also installed with thermonuclear jet/rocket hybrid engines, which were capable of functioning both in space and in the atmosphere, allowing the Zeta Gundam to engage in aerial combat immediately after atmospheric entry.The Zeta Gundam's weapons were highly systematic and presented almost no hindrance when carried. It was armed with a pair of head-mounted vulcan guns, a pair of beam sabers stored in the side skirt armor that served as beam guns in Wave Rider Mode, a pair of forearm-mounted grenade launchers, an E-pac powered beam rifle, a shield attached to the left forearm that served as the Wave Rider Mode's nose unit, and the Hyper Mega Launcher, a powerful beam weapon developed from the MSN-00100 Hyaku Shiki's Mega Bazooka Launcher. Thanks to these weapons, it was capable of handling nearly all battlefield situations.Finally, the Zeta Gundam was equipped with the Bio-Sensor, a Quasi-Psycommu device that assisted with the mobile suit's controls using the pilot's brainwaves, improving its responsiveness. Though details about this device was unclear, there were instances of it allowing the Zeta Gundam to demonstrate abilities beyond its specifications during combat. Overall, the Zeta Gundam had exceptionally high operability and was regarded as a masterpiece of the Gryps Conflict era.

Product Description 星甲魂将传 曹仁 From the Legend of Star General series comes this new 1/72 scale model kit of MNP-XH02A Cao Ren from Motor Nuclear. This model kit features a highly detailed mech design, which comes with a variety of accessories to build to help customize your model. Product Features 7.87 inches (20cm) 1/72 Scale Made of plastic Part of the Legend of Star General series Highly detailed Instructions may or may not include an English translation Box Contents Pieces to build Cao Ren Weapons Accessories 3 Pedestal bases Platform stand Instructions

Product Description SNAA 1/100 Hunt and Kill Hunting Falcon (revived version) SNAA has reworked the color scheme of the Hunting Falcon based on feed backs from fans on its first release.  Product Features Approximately 7.87 inches tall (20cm) 1/100 Scale Injection plastic model kit Instructions may or may not include an English translation Box Contents Pieces to build XH-01 Hunting Falcon Floating Cannon Claw Shield laser weapon Antenna Spear Laser effect parts Stand Decals

F/D-20 Zowort Heavy is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. The Zowort Heavy is a combat-oriented model of the F/D-19 Zowort with significant upgrades. Its components have been treated to allow sustained use in multitudes of harsh environments in atmospheric conditions. Its stability in flight has also been improved over the basic model giving it a surplus loading capacity enabling large-scale firearms to be mounted on the back which is unrecomended for the Zowort. The left and right sides of the backpack could be outfitted with heavy weaponry depending on the pilot's requirements.

The MSN-06S-2 Sinanju Stein is a mobile suit from Mobile Suit Gundam Narrative and is piloted by Zoltan Akkanen. The MSN-06S Sinanju Stein was developed to test the durability and follow-up capabilities of the Psycho-Frame. Two units of the Mobile Suit, referred to using the development code "Stein 01", were later stolen by The Sleeves, remnants of Neo Zeon. One unit was remodeled as the MSN-06S Sinanju and used as the flagship MS of the organization. In UC 0097, the other unit was seen in the fight over the RX-0 Unicorn Gundam 03 Phenex and was embellished with the engravings that became root for the name of The Sleeves.

The LM314V23/24 V2 Assault-Buster Gundam is one of several upgrades to the LM314V21 Victory 2 Gundam featured in Mobile Suit Victory Gundam. It is piloted by Uso Ewin. To cope with different combat situations, the Victory 2 Gundam can be equipped with two different sets of optional parts, creating the LM314V24 Victory 2 Assault Gundam and the LM314V23 Victory 2 Buster Gundam. As the parts of the Assault and Buster configurations do not overlap, it is possible to mount both sets simultaneously, creating the Assault-Buster configuration which has overwhelming offensive power and high defensive capabilities. However, it increases the V2's overall mass considerably.

The MS-06R Zaku II High Mobility Type (Reuse "P" Device) (aka Psycho Zaku) is a prototype mobile suit from the manga Mobile Suit Gundam Thunderbolt and its animated adaptation. It is piloted by Daryl Lorenz. The MS-06R Zaku II High Mobility Type (Reuse "P" Device) is a mobile suit operated by the Zeon army's Living Dead Division. An experimental unit equipped with the “Reuse P (Psycho) Device” - a next generation operating system that has the potential to operate a mobile suit's limbs by communicating to the drive system of the mobile suit directly via thoughts. Even individuals with little piloting experience can master the controls in a short period due to this system. Although Ensign Daryl Lorenz is the pilot of the Psycho Zaku and his main mission is to snipe from ultra-long ranges, to pilot the unit, a high proficiency of control is necessary. It is believed that some training time is necessary, however it was pressed into combat so the training was cut extremely short thanks to the device. In order to draw out 100% of its abilities, the pilot must be quadruple amputee to fully interface with the mobile suit.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.[1]In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

Evangelion Mark.06 (エヴァンゲリオン Mark.06[?], "Evangelion Māku Shikkusu") is one of the Evangelion appearing in the Rebuild of Evangelion movie series. It first appears at the end of Evangelion: 1.0 You Are (Not) Alone while still under construction at the Tabgha Moon Base, its first actual sortie takes place during the climax of Evangelion: 2.0 You Can (Not) Advance, piloted by Kaworu Nagisa. It reappears in Evangelion: 3.0 You Can (Not) Redo as an autonomous unit. Mark 06 is the first Mark Series unit introduced to the Rebuild tetralogy. The final armored Mark.06 is a deep blue with yellow trim. The shoulder pylons are uniquely curved and the units torso is elongated featuring an extra set of chest plate compared to other production model. The horned helmet, which bears a strong resemblance to Armaros's, has a red visor covering the eye holes. The entry plug appears to be designed to provide a noticeably higher field-of-vision for the pilot. The Evangelion has shown to be capable of levitation while bearing an Angelic halo, which—in addition to the dialogue between SEELE, Gendo, and Fuyutsuki—hints at extremely potent capabilities.Evangelion Mark.06 was constructed at NERV (Rebuild)'s lunar 7th Branch, Tabgha Base. It initially appears unfinished, with its body covered in a rubbery white material,[1] and a purple mask covering its face, bearing the logo of SEELE (Rebuild) with two dark holes at the top which marks under them that make it seem as if they were crying. The morphology of the head and neck is very similar to Second Angel Lilith, although the more defined body, along with what appears to be a core visible beneath the fabric, is closer to a normal Evangelion. An IV-like device labeled BTB is connected to the Evangelion's left arm.Later, the white cover is removed and the Evangelion undergoes the process of outfitting. The exposed skin on the head is dark gray while the body is tightly covered on a darker fiber that resembles muscle tissue. The mask remains affixed to the face, although it appears slightly modified, with the SEELE logo taking more space than before and the crying marks under the holes at the top removed. The middle part of the mask, approximately where the eyes would be, is hidden by a provisional covering held tightly by external wires as the helmet is readied for application.

The RX-0 Full Armor Unicorn Gundam (aka Full Armor Unicorn, Unicorn) is the RX-0 Unicorn Gundam equipped with an array of weapons. It is piloted by Banagher Links. Includes RX-0 Unicorn Gundam 2 Beam Sabers (4 handles, 2 on the backpack, 1 on each forearm) Unicorn Mode antenna Destroy Mode antenna Beam Magnum Hyper Beam Javelin x2 Beam Gatling Gun x6 (paired into 2 each) Hyper Bazooka x2 Grenade Launchers x2 Anti-Ship Missile Launcher x2 Shield x3 Hand Grenade Racks x8 Hand Grenades x24 (3 connected for each rack) Large Booster x2 Support stands for each Large Booster 1 pair of fists 1 pair of holding hands 1 pair of widespread hands 1/144 Banagher Links figurine Adapter for Action Base Additional backpack attachment parts for use in the Full Armor loadout

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

AMX-004 Qubeley (キュベレイ Kyuberei?) is a mobile suit that appears in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It is piloted by Haman Karn. The Qubeley is a next generation mobile suit designed for Newtypes that features numerous technological innovations which allow it to fight on par with other advanced mobile suits that appeared during the Gryps Conflict and the First Neo Zeon War. Developed from the data gathered from the MS-09R4 Psycommu Rick Dom "Schnee Weiss" and the AMX-001 Prototype Qubeley, the Qubeley featured four independently movable shoulder binders, two binders per shoulder, to assist in AMBAC (Active Mass Balance Auto Control), granting phenomenal mobility. Though lacking the full range of motion as the arms and legs, these binders bring the Qubeley's total number of movable limbs up to eight. Furthermore, these binders also contain the Qubeley's primary thrusters.The most notable feature of the Qubeley is that it is the first combat mobile suit to be equipped with a mobile suit-sized psycommu system, which is used to control the new remote controlled weaponry known as "Funnels". The prototype featured a similar system, but its psycommu had not been fully miniaturized and the Funnels were stored in its main body, leaving the prototype with a large body that stood 25 meters tall. The system aboard the Qubeley had been perfected and its ten Funnels were stored in a container located in its rear armor, allowing for quicker deployment and recall. The Qubeley lacks the mega particle cannons of the prototype version, replacing them with a pair of dual-purpose beam guns that can double as beam sabers for close combat. Lastly, the Qubeley is one of the first Zeon mobile suits to use a dual-type optical sensor instead of the traditional mono-eye.

In collaboration with Tachibana Neko Kogyo, this Ext-GA/EA Estailev model kit features deep striking colors and a multitude of weapons and accessories which will make this much the perfect addition to your collection.When completed this model kit becomes a fully articulated figure that stands almost 7 inches tall and is made of plastic.

IMPORTANT MANUFACTURE UPDATE Additional reprints are available for Thor, but the manufacture is no longer making Thor with the preorder bonus items (the cape). Preorder Details Please read our Preorder FAQ carefully before placing the order. Product Description He Mo Xian (和模线) NZS-05-3 Legend of Thor, God of Thunder. Product Features Material: Plastics (ABS/POM/PVC etc.) Height: 22.5 cm Item Type: Model Kits Scale: 1/100 Box Contents 1 x main figure 2 x hand cannon 1 x backpack 1 x hammer 1 x eye-lighting part 1 x water slide decal