Products

The MSN-00100 (MSN-100, MSN-001) Hyaku Shiki (百式, "Type 100") is a prototype Mobile Suit featured in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It was primarily piloted by Quattro Bajeena during the Gryps Conflict and later by Beecha Oleg in the First Neo Zeon War. The Hyaku Shiki is a mobile suit built by Anaheim Electronics as part of the "Zeta Project". It was originally designed as the prototype transformable mobile suit, MSN-001 Delta Gundam which incorporated Anaheim Electronics' own "movable frame" technology and backpack-mounted wing binders for additional mobility. However, defects in the frame design led to problems in its transformation and the machine's development was soon abandoned.When the AEUG captured the Titans' RX-178 Gundam Mk-II, the movable frame technology of this newly acquired mobile suit assisted greatly in the advancement of the Zeta Project and also led to the redesigning of the Delta Gundam into the high-performance, non-transformable Hyaku Shiki. Hyaku Shiki, which means 'Type 100' in Japanese, is named as such by its lead developer, Professor M.Nagano who hoped to create a mobile suit design that would endure for a hundred years. Because of the reliability of each device and its ease of access to the interior, the Hyaku Shiki has also been given a role as a testbed for the operational testing of various equipment under development.The Hyaku Shiki's gold-colored appearance is due to the application of a beam-resistant coating on its armor, giving it some limited protection against beam attacks. The suit also has a unique sensor called the Image Directive Encode (IDE) system, which emits a red pattern when scanning or during precision aiming. It also retains several design features from the original Delta Gundam design, most notably the legs' front armor and backpack-mounted wing binders. The Delta Gundam's transformation capabilities later resurface in the MSN-001A1 Delta Plus.

The MBF-P03R Gundam Astray Blue Frame 2nd Revise is the improved form of the MBF-P03 Gundam Astray Blue Frame Second L developed by the Serpent Tail with help from Lowe Guele. It first appeared in the photo series Mobile Suit Gundam SEED VS Astray. The unit is piloted by Gai Murakumo. Using combat data obtained from the Gundam Astray Blue Frame Third, the Blue Frame Second L was upgraded into the Gundam Astray Blue Frame 2nd Revise. The new MS has better balance and its main weapon, Tactical Arms II, is an improved version of the original Tactical Arms and has 2 new forms, Gatling Arm and Sword Arm. Blue Frame 2nd Revise retains the other weapons of Second L as well as the Trans Phase Armor system around the cockpit. It also stores additional power packs on its rear skirts, which are often used together with the Gatling form. Like the original Blue Frame, the Blue Frame 2nd Revise can be equipped with the Scale System for aquatic missions.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The ν Gundam is one of the most advanced mobile suits during the Second Neo Zeon War in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, it is used by Amuro Ray who also came up with its basic design. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average specification values of each successive generation of Gundam-type units from the original RX-78-2 Gundam to the MSZ-010 ΖΖ Gundam and updated with state-of-the-art technologies introduced at the time. Various test data collected from the ARX-014P Silver Bullet (Funnel Test Type), the YRA-90A μ Gundam, and the RX-9 Narrative Gundam were also used in its development.The ν Gundam's design focuses on versatility and operational aspects, as well as emphasizes on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycho-Frame, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.Incorporating the Psycho-Frame technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ν Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a Newtype pilot. It is also the first Gundam-type machine to be equipped with Funnels, and a newly developed MS control program is installed to account for the ν Gundam's center of mass during the separation and movement of the Funnels. Despite its short development time, the ν Gundam proved itself to be a formidable mobile suit and when combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art machine was able to almost single-handedly hold back the whole Neo Zeon force, and its Psycho-Frame was put to the test to determine the history of humanity living on earth.

The MS-06S Zaku II Commander Type (aka MS-06S Zaku II, MS-06S, S Type) is a mobile suit introduced in Mobile Suit Gundam. One such unit was famously piloted by Char Aznable. Developed in response to veteran pilots' request for a high performance unit, the MS-06S Zaku II Commander Type was far more mobile than its predecessor, the MS-06F Zaku II, but was also far more difficult to control. Compared to the F Type, the S Type's vernier nozzles were enlarged, and the output of its main thrusters were increased by 30% while retaining the same size. To make space for the improved thrusters and enlarged propellant tanks, various automatic control systems of the F Type were removed. While this reduced S Type's operability, it also enabled experienced pilots to disable many unnecessary limiters and push the mobile suit to its structural limit.Other changes from the F Type included the S Type's generator being 5% lighter, and its armor composition and structure were improved, improving its overall power-weight ratio. Finally, the S Type were all equipped with a head-mounted multi-blade antenna. Though the antenna itself was identical to those found on the F Type, the structure at its base was different, giving it improved communications and enemy detection capabilities. Despite having many special internal components, the S Type still shared 80-90% of its parts with the F Type, making it easy to resupply and maintain. This also meant that like the F Type, it could easily be modified to operate in space or under gravity.

The MS-07B-3 Gouf Custom is an upgraded variant of the MS-07B Gouf that was introduced shortly after the MS-09B Dom. It first appeared in the anime Mobile Suit Gundam: The 08th MS Team. During the deployment of the Gouf, its limited combat versatility became evident with its design concept of emphasis on hand-to-hand combat. Numerous disadvantages surfaced during operation on the battlefield, such as lack of flexibility due to the Gouf's fixed armament. The Gouf would be completely redesigned as the MS-07B-3, which was an improvement over the original. The Gouf Custom was designed with improved close quarters shooting and detachable weapons. It was designed primarily for ace pilots preferring a lighter mobile suit that could leap and jump as opposed to the heavy, yet effective MS-09B Dom.The Gouf Custom featured multiple changes to the MS-07B, including the elimination of the awkward five finger 75mm machine guns, replacing it with a normal manipulator and a wrist mounted 3-barrel 35mm Machine gun. The coil-like heat rod is replaced with a magnetic grappler wire that connects and disables an enemy with an electric charge rather than damaging them. The grappler wire could also be used as a repelling line that could slow or even halt the descent of a falling Gouf in the right conditions. The shield of the Gouf was modified so that it not only stored the Gouf's heat sword but is also capable of carrying a 75mm gatling gun, greatly enhancing the mobile suit's fire power.

The MS-18E Kämpfer (ケンプファー Kenpufā?) is a heavy assault mobile suit featured in the Mobile Suit Gundam 0080: War in the Pocket OVA. It was piloted by Mikhail Kaminsky of Zeon's Cyclops Team during the One Year War. The "E" in the MS-18E Kämpfer's model number was an abbreviation for the German word "Einhauen," which translates to "one strike." "One strike" summed up the suit's role as a fast assault unit that was meant to strike quickly, cause massive damage with its varied weapons loadout, and make a fast escape. The Kämpfer was a very focused design, never intended to work outside of its role. Within this role it was an exceptional unit, rivaling the Federation's RX series in firepower and speed. It was equipped with numerous thrusters and verniers to achieve high maneuverability. Conversely, the large number of thrusters resulted in higher fuel consumption rate, limiting its operational time.The Kämpfer's design opted for minimal armor, even removing the hip-mounted skirt armor found on most mobile suits. The choice of conventional shell-based weapons rather than beam weapons was made to reduce the drain on its reactor and resultant drop in speed. Weapon racks were designed to be ejected from the unit as they were expended, minimizing dead weight. The Kämpfer was intended to be operated by special forces, and was built to be easily disassembled and reassembled in blocks, aiding in its infiltration behind enemy lines.

The MSA-0011[Ext] Ex-S Gundam (aka Extraordinary-Superior Gundam) is an upgraded version of the MSA-0011 S Gundam that appears in Gundam Sentinel. It is piloted by Ryou Roots. By adding several new armor, weapons, and engine modules the engineers of Task Force Alpha's Pegasus III were able to upgrade the MSA-0011 S Gundam into the Ex-S Gundam. The Ex-S Gundam still had three cockpits, but Ryou Roots was the only person who piloted the mobile suit, and due to Ryou's poor piloting skills, it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.With ALICE functioning as the co-pilot of the Ex-S Gundam, "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could take full control of the Ex-S Gundam and its various components and weapons at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryou were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and was more than capable of compensating for Ryou's lack of skill.For defensive purposes, the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block, protecting it from ranged beam attacks. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more verniers, additional propellant tanks, and thrusters.Two new large thruster units were mounted on the Ex-S Gundam's back, giving it incredible thrust and speed. Two large caliber beam cannons were mounted on both thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.The Ex-S Gundam also had remote weaponry in the form of an INCOM, a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. The Ex-S Gundam also featured two reflector INCOMs, stored in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs do not fire beams but instead reflect beam fired from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.Like its predecessor, the Ex-S Gundam was also capable of transforming into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam changes into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and used for travelling over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in combat situations, the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser reaches the battlefield and transforms into the Ex-S Gundam.

The MSA-003 Nemo is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. Its design was later updated for the light novel/OVA series Mobile Suit Gundam Unicorn. Based on the Earth Federation Forces's RMS-179 GM II, the MSA-003 Nemo is a mass-production general-purpose mobile suit developed by Anaheim Electronics for the AEUG. As Anaheim Electronics had bought over Zeonic Corps that worked for the Principality of Zeon, its mobile suit technology has Zeon influences and as a result, the Nemo has a mixture of both Zeonic and Federation technologies.Like most other mobile suits created during the Gryps War, the Nemo has an internal movable frame. Its movable frame is of a new design and reflects the data gained by Anaheim Electronics from the development of the RMS-099 Rick Dias and the MSN-00100 Hyaku Shiki. Thanks to this movable frame, the Nemo has high versatility and can operate in various environments such as zero-gravity, tropical regions, and cold climates. In addition, its legs' movable frame enables high mobility regardless of the environment, and as a result of considering Earth descent operations, it has a highly flexible structure with excellent drop and impact resistance. The Nemo's thrusters layout is designed using the RGM-79SP GM Sniper II's as a reference and this is due to part of the Nemo's development staff having worked on the latter during the One Year War.Compared to the GM II's titanium alloy ceramic composite, the Nemo has a more durable Gundarium alloy armor. As this armor is produced using the same technology as the RMS-108 Marasai's (another Anaheim Electronics' mobile suit, but provided to the Titans), it has high cost-effectiveness. Most of the Nemo's armaments are the same as those used by existing MS, and it could also use other armaments made by the Federation or Zeon. The Nemo was also relatively easy to pilot even for less skilled recruits, and overall, it was an excellent machine with performance superior to the GM II and RMS-106 Hizack.

The MSM-04 Acguy (アッガイ Aggai?) is an amphibious mobile suit introduced in the anime Mobile Suit Gundam. Following the Zimmad Company's MSM-03 Gogg, the Zeonic Company produced their own amphibious mobile suit for the Principality of Zeon, the MSM-04 Acguy. The Acguy used many of the same parts and components as the MS-06F Zaku II, including two of the Minovsky Ultracompact Fusion Reactors used by the latter. Even with the twin reactors, the Acguy left only a trace heat signature, making it effective for stealth and infiltration operations. It is also one of the tallest amphibious mobile suit used by the Zeon during the war. About 60 units were produced according to some sources.The Acguy's weapons consisted of four 105mm vulcan guns mounted in its unusually large head. In its right forearm was a mega particle gun, but in some units, this was replaced by a vulcan gun. The right forearm also had extendable claws known as Iron Nail (along with an extendable arm to increase striking distance) for striking the Earth Federation's mobile suits and property. In the left forearm was a six-tube missile launcher. Some models also had missile launchers in the right forearm, replacing the mega particle cannon and claws.

The MSM-07S Z'Gok Commander Type is a variant of the MSM-07 Z'Gok created by the Principality of Zeon during the One Year War. An improved, higher performance model of the Z'Gok, it has higher reactor output, better maneuverability and a change in armor materials. It eventually became the standard Z'Gok model.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

The MVF-X08 Eclipse Gundam (MVF-X08 エクリプスガンダム?) is a custom-made Mobile Suit from the Mobile Suit Gundam SEED Eclipse manga. It was piloted by Tatsumi Hori for the Orb Disaster Relief Team.A custom Mobile Suit developed in secret by Orb. Its most prominent feature was its ability to transform from a flight form to an MS form. It was equipped with a Mirage Colloid function, and was armed with functions specialized for the ODR, an organization that excelled in covert operations. Two units have been confirmed to exist.The MVF-X01 Eclipse was also developed with the aim of giving an MS the functions of a supersonic fighter capable of operating at ultra-high speeds, high altitudes and cruising extremely long-distances. Unlike the MVF-M11C Murasame, which was also a transformable aerial combat MS developed by Orb to defend territorial waters and airspace, the Eclipse had capabilities that allowed it to attack enemy bases. Although these Mobile Suits have similar model numbers, they are machines created with different design philosophies.Eclipse is a special mobile suit that it places burden on a bodily-inexperienced pilot, as revealed in chapter 12 Gundam Seed Eclipse manga, where Tatsumi Hori spilled his blood from his mouth as he couldn't take the attack pressure from both Ginn Gladiator and Aile Calamity Gundam.

The OZ-00MS Tallgeese Flügel is a variation of the OZ-00MS Tallgeese appearing in New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers. The Tallgeese Flugel is a variant of the OZ-00MS Tallgeese created by Mike Howard, who has outfitted it for space use. The original back-mounted thruster units are replaced by four angelic wing binders lined with many thrusters, granting the Tallgeese great speed and manoeuvrability in space. The two larger wings can function as shields when positioned in front of the suit.

The OZ-13MS Gundam Epyon is a mobile suit introduced in Mobile Suit Gundam Wing. Originally piloted by Heero Yuy, it was later given to Zechs Merquise. Based on data from the OZ-00MS Tallgeese and the other Gundams, the Gundam Epyon was created by Treize Khushrenada while he was placed under confinement by the Romefeller Foundation. In keeping with Treize's philosophy, the Epyon eschews cowardly long-range weapons in favor of chivalrous close combat. However, when the suit becomes a part of White Fang, a pair of Vulcan guns are added to the head.[1] Its main weapons are a segmented, whip-like heat rod mounted on a shield and a powerful beam sword whose energy is supplied by a direct connection to the Epyon's generator. Treize also installed a modified version of the Zero System known as Epyon System in the cockpit, making this suit a powerful opponent. The Epyon can also transform into a "mobile armor" mode for high-speed flight and cruising in space. It resembles a mythological dragon in this mode, however, its primary weapons are inaccessible save for the Epyon Claws which are also used as landing gear in this form.Gundam Epyon EW is Hajime Katoki's redesign of Epyon in a similar fashion to other EW version of the first five Gundams and included in New Mobile Report Gundam Wing: Frozen Teardrop as well as Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. It is later given additional equipment known as 'Sturm Und Drang' that can be used for both defense and offense.

The PF-78-3A Gundam Amazing Red Warrior is a Gunpla from the anime series Gundam Build Fighters Try. It is a variant of the PF-78-3 Perfect Gundam III. Built by Meijin Kawaguchi for his own use, the Gundam Amazing Red Warrior is a customized version of the PF-78-3 Perfect Gundam III "Red Warrior" that appears in the manga Plamo-Kyoshiro. This Gunpla is also the Meijin's way of honoring Takeshi Iori, who had used the Perfect Gundam. The Gundam Amazing Red Warrior can exhibit overwhelming speed during battle due to its greatly improved thrust, and has high maneuverability thanks to the flexibly mounted vernier units above the shoulder armors. The weapon mounted on the left side of the backpack can be changed to meet the needs of different battle, and this allows the suit to be highly adaptable. The combination of the Gunpla's high degree of completion and the Meijin's excellent piloting skills caused the Gundam Amazing Red Warrior to be a formidable foe for any opponent.

The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than Luna Titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor. The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

The RGM-79[G] GM Ground Type is a ground based predecessor to the RGM-79 GM. It first appeared in Mobile Suit Gundam: The 08th MS Team. An early prototype of the Earth Federation Forces' mobile suit mass production project, the GM Ground Type was developed before the RX-78-2 Gundam's operational data was recovered. Even though it was only able to operate on Earth, its internal parts were all tuned for ground combat, and it was equipped with Luna Titanium armor, causing its mobility, maneuverability, and general performance to surpass the later RGM-79 GM.It is said that its performance under gravity even rivals that of the RX-78.The GM Ground Type was a simplified version of the RX-79[G] Gundam Ground Type, and produced using the same production line.Compared to the Gundam Ground Type, the GM Ground Type omitted the chest-mounted Vulcan gun and multi-launcher, the weapon container mount on the backpack, and was equipped with a less powerful generator.It also did not incorporate parts from the RX-78 series, though its head unit was similar in specs to that of the RX-78's.Since it was produced after the production format was established, its ease of production, ease of maintenance and availability of parts were all greater than its predecessor.Due to its use of Luna Titanium alloy, it was unsuited for mass production and produced in limited numbers. However, the GM Ground Type was important in establishing the EFF's mobile suit production framework. The operational data it collected contributed to the development of later mobile suits.Finally, the basic structure of its head was later inherited by the RGM-79 GM, becoming the iconic face of Federation mass production mobile suits.

The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras and image stabilizers for precision, long range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long range sniping capabilities. The suit is one of the few capable of accurately firing MS sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat, and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boasts superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's, and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow up models. The GM Sniper II was however used as the basis for the RX-80, a mobile suit that became the base unit for the Project Pale Rider. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.

The RGM-96X Jesta is a mobile suit based on the RGM-89 Jegan, and it is introduced in Mobile Suit Gundam Unicorn. The Jesta is a high performance special operations mobile suit of the Jegan series developed by Anaheim Electronics to escort the RX-0 Unicorn Gundam, as the Unicorn Gundam's operating time in its Destroy Mode is limited. Aside from escorting the Unicorn Gundam, the Jesta's intended mission also consisted of dispatching ordinary enemy forces, creating "situations" in which the Unicorn Gundam can directly confront and destroy enemy Newtype weapons.The Jesta is fitted with a backpack capable of tremendous thrust so as to keep up with the Unicorn Gundam. Although the Jesta's weapon loadout is similar to the Jegan's, it features improved and more advanced weapons, such as the customized beam rifle and backpack-mounted movable shield, which like the Jegan's shield, contains four missiles. In addition to its advanced weaponry, the Jesta also carries three spare magazines for the beam rifle on the right forearm, and a beam saber on its left forearm.Although intended to be an escort unit, the Jesta's performance surpasses most Federation mobile suits of its time, overwhelmingly exceeding the Jegan type of the same period, with its performance reaching 90% of the RX-93 ν Gundam's. The Jesta is essentially a product of the UC Project, however this fact has been kept hidden even within the Earth Federation Forces.