Products

The F91 Gundam F91 (F91 ガンダムF91 Effu Kujūichi Gandamu Fōmyura Nainti Wan?) is a mobile suit introduced in the movie Mobile Suit Gundam F91, in which it was piloted by Seabook Arno.[6][7] Harrison Madin piloted two production type units in custom colors. Based on F90V Gundam F90 VSBR Type, the F91 is a prototype machine created under SNRI’s ‘Formula Project’. The Formula Project, also known as F Project, is a miniaturized MS development program meant to address technological problems such as the upsizing and increasing cost of MS, and to rectify Anaheim Electronics’ monopolization of the MS industry. The F91 was developed to reached the ‘performance limit tidemark of present day MS’, and as such, its capabilities exceed that of contemporary machines. SNRI only referred to it by its model number, F91. It was later given the code name "Gundam F91" by Space Ark captain Leahlee Edaberry as its face resembled the Gundam’s.Befitting its smaller size, the Gundam F91 has a small reactor located in its enlarged backpack, surrounded by high-output thrusters. Despite its reduced size, the reactor has a high output, allowing the suit to drive multiple beam weapons including a beam rifle, two beam sabers, a beam launcher, a beam shield, and a pair of variable speed beam rifles (also known as VSBRs). While the first two beam weapons are common among contemporary mobile suits, the last three are of new designs. The beam launcher is a beam weapon equivalent of a projectile firing bazooka. The beam shield generates a highly defensive energy shield to block beam and projectile attacks. The VSBR is the Gundam F91’s most powerful weaponry, and is capable of firing beams of different speed to achieve either high destructive power or high penetrative power. Other weapons include two Vulcan guns and two mega machine cannons.With its reduced size and the increase in output, the Gundam F91 has a drastically improved power-to-weight ratio, allowing it to attain higher mobility than MS of earlier eras. Its mobility is on par with the miniaturized MS deployed later by the Crossbone Vanguard. It also has special features such as the Bio-Computer, MCA (Multiple Construction Armor) structure, and the MEPE (Metal Peel-off Effect) phenomenon. The Bio-Computer is installed in the suit’s head and feeds battle data directly to the pilot, but only a Newtype pilot can draw out its full potential. Accompanying the installment of the Bio-Computer, a head-mounted coolant and heat discharging system were also implemented, with the face guard opening to discharge heat under certain circumstance.The MCA structure incorporates electrical functions into the suit’s armor, allowing for more efficient use of the F91's limited internal space. The MEPE is a byproduct of the MCA structure. It helps the suit to dissipate excess heat by shedding the outer layers of its armor, and in the process, creates afterimages with mass to confuse enemy pilots, as well as the sensors of enemy machines. However, the MEPE is only activated under specific conditions.The Gundam F91’s high performance is not without drawbacks; its full operating mode is too much for normal pilots to handle. Thus, limiters were installed to make the suit more manageable; only a Newtype pilot can handle the full operating mode. When the Bio-Computer - via the Bio-Sensor in the pilot’s linear seat - determines that a Newtype is at the controls, it will disable the limiters and allow activation of the full operating mode. In this mode, the suit performs at its maximum potential and forced cooling is activated. This results in the suit radiating heat from all over its body: the face guard opens to vent heat, the shoulder-mounted heat radiations fins are deployed, the retractable thruster units on the back of the lower legs and the associated fins are activated, and the MEPE phenomenon occurs. All these are to reduce damage to the machine caused by movement overload during the full operating mode, and to protect the Bio-Computer that is sensitive to high heat. It is also worth noting that the front grill that takes up most of the chest and abdomen is a heat sink.After the war with the Crossbone Vanguard, an unspecified but extremely small numbers of Gundam F91s were manufactured. The MCA, MEPE, and full spec Bio-Computer were omitted from these production type units; inclusion of these technologies in the prototype unit was more for experimental purposes. Despite this, the catalog specifications of these machines are still comparable to the prototype’s. Although the face guard opening mechanism is retained in all production type units, only certain units for ace pilots (such as Harrison Madin’s) can access the full operating mode through improvements in the cooling system and various devices. However, these ace-used units still do not have the MEPE function due to the enhanced cooling system, as well as the change in the materials used in the final layer of armor.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and piloted by Kira Yamato.One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The FA-78 Full Armor Gundam (Thunderbolt Ver.) is a mobile suit that appears in the manga Mobile Suit Gundam Thunderbolt and its animated adaptation. It is piloted by Io Fleming. A heavily armored and highly maneuverable Gundam-type mobile suit deployed by the Moore Brotherhood. There was another type of Full Armor Gundam with similar model number, the FA-78-1, but it had different details and equipment. Both mobile suits were developed under the ‘Full Armor Operation’, and their differences were a result of experimenting with various systems and equipment.The Full Armor Gundam was fitted with numerous pieces of body armor, a large backpack and had much more weaponry than other mobile suits of its time. Like other mobile suits of the Moore Brotherhood, the Full Armor Gundam had special seals on its joints and large backpack to protect them from the debris drifting in the Thunderbolt Sector. Besides the standard beam sabers, it was also armed with a twin beam rifle, five rocket launchers, a large beam cannon, a 6-tube missile pod and numerous missiles stored in various body armor.Using the two sub-arms on the large backpack, the machine could wield up to four shields, greatly increasing its defensive capabilities. To prevent the weight of the added equipment from reducing the mobile suit's mobility, thrusters and apogee motors were installed on the shoulders, legs and large backpack. The large backpack was also fitted with two rocket boosters, and the Full Armor Gundam's total thrust was considered to be comparable to a high mobility-type mobile suit.The Full Armor Gundam's added body armor, the large backpack and most of the weaponry could be purged when they are damaged or not required, reducing dead weight. After witnessing the power of the Moore Brotherhood's Full Armor Gundam, the Zeon's Living Dead Division, which was operating in the same area, decided to deploy the MS-06R Zaku II High Mobility Type (Reuse "P" Device).

The GAT-X105+P202QX Strike Gundam IWSP (aka Strike IWSP) is a prototype mobile suit introduced in Mobile Suit Gundam SEED MSV. The Integrated Weapons Striker Pack (IWSP) combines the primary characteristics of the Aile, Sword and Launcher Striker Packs, allowing the Strike Gundam to handle different combat situations with one set of equipment. It also grants mobile suit the ability to fly within the atmosphere. Although powerful, the IWSP is highly complex and difficult to use.The IWSP was originally developed by PMP Company, but was abandoned due to energy issue. Orb's Morgenroete Inc. later acquired one of the prototypes and solved the energy issue using their superior battery technology. As the Strike IWSP has no ranged beam weapon, it can be equipped with the standard beam rifle if necessary.After the war, the IWSP is revived by Actaeon Industries in the form of AQM/E-M1 IWSP, which is functionally identical to the earlier P202QX IWSP, despite some differences in appearance. Phantom Pain fit this IWSP pack onto their newly built Strike Gundam which has darker phase shift armor colors. Data obtained from this Strike Gundam IWSP was used in the development of Strike Gundam E, as well as the Noir, Jet and Doppelhorn striker packs.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output.[1] The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.

The GAT-X105E+AQM/E-M1 Strike E + I.W.S.P. is a variant of the GAT-X105E Strike E introduced in Mobile Suit Gundam SEED C.E. 73 Δ Astray. It is piloted by Sven Cal Bayang and Lukas O'Donnell. The Integrated Weapon Striker Pack (I.W.S.P.) combines the primary characteristics of the Aile, Sword and Launcher Striker Packs, allowing the equipped mobile suit to handle various situations with only one set of equipment. As such it is very heavy, very powerful, very energy intensive and difficult to use. The I.W.S.P. also grants mobile suit the ability to fly within the atmosphere and was originally completed by Orb Union's Morgenroete Inc. during the last days of the first war with the model number, P202QX. AQM/E-M1 is a new model of I.W.S.P. developed by Actaeon Industries after the war, it is functionally identical to the P202QX. When using the I.W.S.P., the Strike E can also be equipped with either Strike or Duel Gundam's beam rifle as its optional handheld weapon.

The GF13-017NJ Shining Gundam is a mobile fighter featured in the anime Mobile Fighter G Gundam. It was built by the nation of Neo Japan for the 13th Gundam Fight and piloted by Domon Kasshu, as well as occasionally by his crew member Rain Mikamura. The Shining Gundam was developed for the 13th Gundam Fight by Dr. Mikamura, a Neo Japan scientist. Designed with an emphasis on mobility, it has an excellent balance of offense and defense, and is equipped with the ability to faithfully reproduce the many techniques of the school of the "Undefeated of the East," performed by Domon Kasshu, the champion of colony martial arts. Since the Shining Gundam is a machine that exerts its maximum potential in close combat, there are few fixed armaments.A special feature of this machine is that the emotions and conditions of the passengers are reflected in the machine's performance. In addition, a mechanism that can power up the machine in stages has been introduced.Normal ModeThis form is the default mode of Shining Gundam. It is used when Domon is fighting another opponent without the use of the Shining Finger.Battle ModeThis is the first of Shining Gundam's high-powered modes, which allows it to employ its devastating Shining Finger attack. In this form, the Gundam's arm covers pop out, and its face armor opens for extra ventilation. This transformation briefly increases Shining Gundam's speed and offensive capabilities, but reduces its sensor effectiveness, adaptability, and defensive strength.Super ModeThe second of Shining Gundam's high-powered modes. In this form, Shining Gundam's overall performance is increased by 50%, its speed and offensive power are doubled, and the panels of its armor open up to reveal a variety of cooling systems, boosters and generators. The Super Mode is powered by the emotional energy of its pilot Domon, who at first could only attain this state when he lost control of his rage and passion. However, through the instruction of Schwarz Bruder, Domon learned to attain the serene state of mind of a true warrior, allowing him to activate the Super Mode at will.True Super ModeShining Gundam's True Super Mode is similar to the regular Super Mode, but changes Shining Gundam's colors completely gold. The overall capabilities of the unit are increased tremendously. However, this mode can only be used when Domon is in a serene state of mind (Meikyō Shisui (明鏡止水, Clear Mirror and Still Water) in the original Japanese version). Later, after Domon had replaced Shining Gundam with the God Gundam, both he and the members of the New Shuffle Alliance achieved variations of the True Super Mode called "Hyper Mode".

The GF13-017NJII God Gundam (aka G Gundam, Burning Gundam in the English dub) is the titular Mobile Fighter of Mobile Fighter G Gundam. It was the second Mobile Fighter used by Neo Japan in the 13th Gundam Fight, and is piloted by Domon Kasshu. The successor of the GF13-017NJ Shining Gundam, the God Gundam was developed by Dr. Mikamura almost single-handedly and customized for Domon Kasshu. Even in Normal Mode, its power surpassed that of the Shining Gundam's Super Mode. In addition, it could achieve an even more powerful state called Hyper Mode.Its chest was equipped with the Energy Multiplier System, a unique system that allows energy to be refined in a similar manner to Qi. When piloted by Domon, the King of Heart emblem would appear upon it. It was part of a larger system called the Artificial Aura Generator. The six Core Lander wings on its back (which were named "Dream", "Illusion", "Bubble", "Shadow", "Dew", and "Lightning", after a passage from the Diamond Sutra) and the two short antennas on its head serve as magnetic field generating devices, while the two long antennas function as intelligence-gathering devices. When Hyper Mode is activated, the Energy Multiplier opens up, the six wings deploy, and a ring of light appears on the God Gundam's back, coating it in a magnetic field that improves its mobility through a full-body magnet coating.The God Gundam was armed with a pair of head-mounted vulcan guns, a pair of 3-barrel machine cannons mounted on the upper chest, and a pair of beam swords known as "God Slash". In Hyper Mode, it was capable of using a finisher move known as Bakunetsu God Finger, a refined and more powerful version of Shining Finger. Its forearms were covered in armor known as "G Knuckles" or "God Finger Protectors", which were based on the finishing move of Neo Albania's Gundam Fighter during the 12th Gundam Fight.

GN-0000+GNR-010/XN 00 XN Raiser (aka 00 XN Raiser, pronounced Double-Oh Sun Raiser), is the combination of the GN-0000 00 Gundam and the GNR-010/XN XN Raiser. It appears in the Mobile Suit Gundam 00V side story. 00 XN Raiser carries a pair of GN Buster Sword IIIs that can combine into one large sword. The additional pair of manipulator arms on the XN Raiser allows the 00 XN Raiser to carry more weapons, as well as grant it another pair of arms for combat use. XN Raiser's binders do not dock into the 00 Gundam's twin GN Drives; instead, they fold up when the XN Raiser is docked onto the 00 Gundam. The entire system docks onto the 00 Gundam's back as a weapons backpack.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

The MG 1/100 Gundam AGE II Magnum is a Master Grade model kit from the "Gundam Build Divers" series. Released in 2019, this kit features: Articulated joints for dynamic posing capabilities. Weapons including: 2 Beam Sabers 2 Hyper DODS Rifles 2 Shiguru Shields Transformation capability between Mobile Suit (MS) mode and Phoenix mode. New shoulder mold for increased strength and hip locking mechanisms for enhanced stability in both modes. Snap-fit assembly with color-coded plastic parts, minimizing the need for painting. Once assembled, the model stands approximately 7 inches (17.78 cm) tall, making it a notable addition to any Gundam collection.

The MG 1/100 ASW-G-08 Gundam Barbatos from the acclaimed Mobile Suit Gundam: Iron-Blooded Orphans series is a masterpiece of engineering and detail. This Bandai Master Grade model kit delivers exceptional articulation and stunning accuracy, making it a must-have for collectors and Gunpla enthusiasts alike. Designed for advanced builders, the kit includes a full internal frame that captures the mechanical aesthetic of the Barbatos, while also allowing dynamic poses. The set includes Barbatos' iconic weapons: the mace, sword, and long-range cannon, ensuring a fully immersive building and display experience. Note that Bandai provides high-quality stickers for markings; water-slide decals are not included. Perfect for fans of Iron-Blooded Orphans and modelers seeking a challenge, this MG Barbatos stands out as a centerpiece in any Gunpla collection. Elevate your Gunpla experience with this faithful recreation of the ASW-G-08 Gundam Barbatos—showcasing Bandai's renowned craftsmanship and attention to detail.

The XXXG-01D2 Gundam Deathscythe Hell (aka Deathscythe Hell, or Gundam Zero-Two) is the upgraded version of XXXG-01D Gundam Deathscythe in Mobile Suit Gundam Wing. It is piloted by Duo Maxwell. An updated version of the XXXG-01D Gundam Deathscythe that was destroyed by OZ, the Deathscythe Hell is better adapted for space combat. Like its predecessor, the Deathscythe Hell specializes in stealth and close combat. The new active cloak mounted on the shoulders improve the suit's defense when closed, and can withstand multiple beam cannon shots from OZ's OZ-02MD Virgo. Furthermore, it also allows the suit to become invisible. When opened, the active cloak enhances the Gundam's mobility. One of Duo Maxwell's favorite strategies is to use the Gundam's enhanced hyper jammers and its invisibility to sneak close to enemy units and catch them unawares. This tactic is usually good for taking out at least one or two enemy units, after which Duo will uncloak the Gundam.Deathscythe Hell's primary weapon is a Twin Beam Scythe, an upgraded version of its predecessor's Beam Scythe, and it is equipped with a second beam scythe blade and a small rocket engine on the end, giving it a greater reach and power. The Deathscythe Hell's secondary weapon is a Buster Shield on the left forearm which can be deployed as a projectile weapon. Like the original Deathscythe's, this buster shield can also emit a beam blade. Lastly, the Deathscythe Hell retained the Deathscythe's head-mounted vulcan guns, but the clavicle-mounted machine guns were removed.

The GN-002 Gundam Dynames (aka Gundam Dynames, Dynames) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Lockon Stratos. Using combat data obtained from the Gundam Astray Blue Frame Third, the Blue Frame Second L was upgraded into the Gundam Astray Blue Frame 2nd Revise. The new MS has better balance and its main weapon, Tactical Arms II, is an improved version of the original Tactical Arms and has 2 new forms, Gatling Arm and Sword Arm. Blue Frame 2nd Revise retains the other weapons of Second L as well as the Trans Phase Armor system around the cockpit. It also stores additional power packs on its rear skirts, which are often used together with the Gatling form. Like the original Blue Frame, the Blue Frame 2nd Revise can be equipped with the Scale System for aquatic missions. The paramilitary organization, Celestial Being, deployed several Gundams in AD 2307 to eliminate world conflicts through armed interventions, and the Gundam Dynames which specialized in long-range shooting is one of them. Like its fellow Gundams, Dynames has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles. The GN Particles grant outstanding mobility and are also utilized for beam weaponry, attitude control, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. The Dynames is a third-generation unit developed using the operational data from the second-generation GNY-002 Gundam Sadalsuud, inheriting the reconnaissance mobile suit's powerful sensing capabilities that are now utilized for long-range shooting.During combat, the Dynames primarily serve as a sniper as well as a fire support unit for its allies. Its main weapon is the extremely long-range and powerful GN Sniper Rifle, and when operating this rifle, Dynames is in "Sniper Mode", whereby the Gun Camera hidden in its head is exposed and a precision shooting scope in the cockpit is deployed. The Dynames is however not just limited to long-range attacks as it has a variety of guns and weapons, allowing it to engage in close to mid-range combat when needed, and adapt to various types of missions (including solo missions) as well as changing battlefield conditions. Other standard armaments of the Dynames included GN Beam Sabers on its rear waist unit for close combat, GN Missiles on its knees and front waist armor that can be used to deter approaching enemies, and a GN Shield on the left shoulder for defense. As for optional armaments, it can equip GN Beam Pistols for close to mid-range combat, a GN Full Shield for enhanced defensive capabilities, and a Super Substratospheric Altitude Gun to snipe targets outside the atmosphere from the ground.Besides mounting the GN Beam Sabers, the Dynames' rear waist unit can be used to support the Gundam when it is shooting from seated positions and has a pair of propulsion systems, known as GN Verniers, that create thrust by releasing GN Particles. These verniers are also utilized by other Gundams and have a mechanism whereby their cores are revealed when being activated and when increasing their output. Additionally, the verniers can be moved at the point of attachment, allowing their thrust direction to be adjusted. The overall layout of the Dynames' cockpit is similar to other third-generation Gundams, except for two differences. The first is the aforementioned precision shooting scope stored in the ceiling that lowers down when in use and retracts when not needed. The second is a dock on the right side for placing the individual support AI, Haro, which serves as a sub-pilot, controlling various aspects of the Dynames so the Gundam Meister, Lockon Stratos, can focus on shooting using the precision shooting scope.The third generation Gundams deployed in AD 2307 have several common pieces of equipment, including a pair of clavicle antennas on the torso that serves as the primary control device for the GN Particles, light purple-colored "GN Cables" on various body locations to facilitate the supply of GN Particles to each part of the Gundam and for attitude control purposes, and GN Condensers placed throughout the body to store excess GN Particles, ensuring a reserve of particles that the Gundam can rely on when its operation consumed more than what the GN Drive can produce instantaneously. There is also the special "Trans-Am System" that the Gundams can activate during an emergency to enhance their thrust and defensive capabilities, as well as increase their output to three times that of their normal specifications for a limited time period. This system also causes the Gundams to glow red, and in Dynames' case, its shooting accuracy is improved as well. Unfortunately, this system is a double-edged sword, as the Gundams' performance will drop dramatically once it ends. Additional optional equipment was also developed for the Dynames, such as the set of a sub-aquatic sniper rifle and accompanying sensors that change it into the GN-002/DG014 Gundam Dynames Torpedo and the GNR-001D GN Arms Type-D support mecha that it can dock with to form the more powerful GN-002+GNR-001D GN Armor Type-D. A successor machine with all-around improved performance is later developed based on the Dynames' data and it is known as the GN-006 Cherudim Gundam. Additionally, the Dynames that was moderately damaged during the battle with the UN Forces was eventually refurbished into the GN-002RE Gundam Dynames Repair and deployed on Earth following the defeat of the A-Laws and the Innovators.

The GX-9901-DX Gundam Double X (aka Gundam DX, Double X, DX) is a mobile suit produced by the New United Nations Earth in After War Gundam X and piloted by Garrod Ran. The GX-9901-DX Gundam DX was created by mobile suit engineers of the newly formed New United Nations Earth (NUNE). NUNE recovered the wreckage of GX-9900 Gundam X used by Jamil Neate during the 7th Space War and transplanted some of its system to the new mobile suit dubbed Double X. Furthermore, as creating a completely brand new design was extremely difficult, the mechanics used the Gundam X as the base unit when developing the Double X.The Gundam Double X has an improved Satellite System, the "Satellite System Mk-II". It consisted of a larger reflector unit on its back with six panels, and several energy radiator plates on the limbs as part of the new improved cooling system to increase the microwave energy absorption. Accompanying this increase in energy storage capacity, the single-barreled Satellite Cannon was upgraded into the two-barreled Twin Satellite Cannon, allowing Double X to unleash destructive force several times that of the Gundam X. The power of the Twin Satellite Cannon was demonstrated when Garrod Ran used it to destroy the island of Zonder Epta in one shot, and shown again when used to destroy the Space Revolutionary Army's Colony Laser. As the old system transplanted from Jamil's Gundam X still contains his brain wave patterns, Double X can use the Twin Satellite Cannon without a Newtype as its pilot.The Gundam Double X is also equipped with two Hyper Beam Swords stored on its side skirt armor, two Head Vulcans, four Breast Launchers and can use custom-made weapons including the Buster Rifle and Defense Plate. Because of its similarities to the Gundam X, the Gundam Double X can dock with a support craft developed for the Gundam X called the GS-9900 G-Falcon. While docked with the G-Falcon, the Double X is unable to use some of its weapons, but has the ability to use the weapons equipped on the aft section of the G-Falcon. Also, while joined with the G-Falcon, the Gundam Double X is able to safely re-enter Earth's atmosphere.Like the Gundam X, the Double X had a security key in the form of a G-Controller that is needed to activate and control it. However, while the Double X has its own G-Controller, its base system is still the same as the Gundam X. This means that even without the Double X's G-Controller, it can still be operated by anyone who has an older-model G-Controller used with the Gundam X - as demonstrated by Garrod, who stole the Double X in this manner.

 The XXXG-01H Gundam Heavyarms (aka Heavyarms or Gundam Zero-Three) is a mobile suit from the TV anime Mobile Suit Gundam Wing. It was the third of Operation Meteor's five Gundams, and was piloted by a young man operating under the pseudonym Trowa Barton. Created by Gundam Scientist Doktor S, the Heavyarms was developed in the L3 Colonies under the financial support of the Barton Foundation. The Heavyarms is a long-range attack unit with a variety of built-in firearms. Its design is a combination of the firepower aspect of the Wing Gundam Zero with an emphasis on overwhelming suppressive fire. Its overall firepower is comparable to 3 to 5 battleships', but its attack power drops drastically once it run out of ammunition. However, with the skilled circus performer Trowa's excellent piloting sense, the Heavyarms is capable of acrobatic melee combat.

The MSN-00100 (MSN-100, MSN-001) Hyaku Shiki (百式, "Type 100") is a prototype Mobile Suit featured in Mobile Suit Zeta Gundam and Mobile Suit Gundam ZZ. It was primarily piloted by Quattro Bajeena during the Gryps Conflict and later by Beecha Oleg in the First Neo Zeon War. The Hyaku Shiki is a mobile suit built by Anaheim Electronics as part of the "Zeta Project". It was originally designed as the prototype transformable mobile suit, MSN-001 Delta Gundam which incorporated Anaheim Electronics' own "movable frame" technology and backpack-mounted wing binders for additional mobility. However, defects in the frame design led to problems in its transformation and the machine's development was soon abandoned.When the AEUG captured the Titans' RX-178 Gundam Mk-II, the movable frame technology of this newly acquired mobile suit assisted greatly in the advancement of the Zeta Project and also led to the redesigning of the Delta Gundam into the high-performance, non-transformable Hyaku Shiki. Hyaku Shiki, which means 'Type 100' in Japanese, is named as such by its lead developer, Professor M.Nagano who hoped to create a mobile suit design that would endure for a hundred years. Because of the reliability of each device and its ease of access to the interior, the Hyaku Shiki has also been given a role as a testbed for the operational testing of various equipment under development.The Hyaku Shiki's gold-colored appearance is due to the application of a beam-resistant coating on its armor, giving it some limited protection against beam attacks. The suit also has a unique sensor called the Image Directive Encode (IDE) system, which emits a red pattern when scanning or during precision aiming. It also retains several design features from the original Delta Gundam design, most notably the legs' front armor and backpack-mounted wing binders. The Delta Gundam's transformation capabilities later resurface in the MSN-001A1 Delta Plus.

The MBF-P03R Gundam Astray Blue Frame 2nd Revise is the improved form of the MBF-P03 Gundam Astray Blue Frame Second L developed by the Serpent Tail with help from Lowe Guele. It first appeared in the photo series Mobile Suit Gundam SEED VS Astray. The unit is piloted by Gai Murakumo. Using combat data obtained from the Gundam Astray Blue Frame Third, the Blue Frame Second L was upgraded into the Gundam Astray Blue Frame 2nd Revise. The new MS has better balance and its main weapon, Tactical Arms II, is an improved version of the original Tactical Arms and has 2 new forms, Gatling Arm and Sword Arm. Blue Frame 2nd Revise retains the other weapons of Second L as well as the Trans Phase Armor system around the cockpit. It also stores additional power packs on its rear skirts, which are often used together with the Gatling form. Like the original Blue Frame, the Blue Frame 2nd Revise can be equipped with the Scale System for aquatic missions.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The MS-18E Kämpfer (ケンプファー Kenpufā?) is a heavy assault mobile suit featured in the Mobile Suit Gundam 0080: War in the Pocket OVA. It was piloted by Mikhail Kaminsky of Zeon's Cyclops Team during the One Year War. The "E" in the MS-18E Kämpfer's model number was an abbreviation for the German word "Einhauen," which translates to "one strike." "One strike" summed up the suit's role as a fast assault unit that was meant to strike quickly, cause massive damage with its varied weapons loadout, and make a fast escape. The Kämpfer was a very focused design, never intended to work outside of its role. Within this role it was an exceptional unit, rivaling the Federation's RX series in firepower and speed. It was equipped with numerous thrusters and verniers to achieve high maneuverability. Conversely, the large number of thrusters resulted in higher fuel consumption rate, limiting its operational time.The Kämpfer's design opted for minimal armor, even removing the hip-mounted skirt armor found on most mobile suits. The choice of conventional shell-based weapons rather than beam weapons was made to reduce the drain on its reactor and resultant drop in speed. Weapon racks were designed to be ejected from the unit as they were expended, minimizing dead weight. The Kämpfer was intended to be operated by special forces, and was built to be easily disassembled and reassembled in blocks, aiding in its infiltration behind enemy lines.