Products

The MSN-06S-2 Sinanju Stein is a mobile suit from Mobile Suit Gundam Narrative and is piloted by Zoltan Akkanen. The MSN-06S Sinanju Stein was developed to test the durability and follow-up capabilities of the Psycho-Frame. Two units of the Mobile Suit, referred to using the development code "Stein 01", were later stolen by The Sleeves, remnants of Neo Zeon. One unit was remodeled as the MSN-06S Sinanju and used as the flagship MS of the organization. In UC 0097, the other unit was seen in the fight over the RX-0 Unicorn Gundam 03 Phenex and was embellished with the engravings that became root for the name of The Sleeves.

The MSZ-010 ΖΖ Gundam (aka ΖΖ Gundam, ZZ; pronounced "Double Zeta") is the titular mobile suit of the anime Mobile Suit Gundam ZZ and is piloted by Judau Ashta. A direct development of the MSZ-006 Zeta Gundam, the ΖΖ Gundam, which had been completed through a prototype, was given the development code "θ" (thus also known as the "θ Gundam") as it was the sixth "Anaheim Gundam" after the RMS-099 Rick Dias (also known as “γ Gundam”). The development plan of the ΖΖ Gundam existed two years before the completion of the Zeta Gundam but was shelved due to internal competition and production delays. However, the performance advantage of the Zeta Gundam against new Titans mobile suits did not last long, and so development of the ΖΖ Gundam was resumed.The ΖΖ Gundam sought to reproduce the operating functions of the RX-78-2 Gundam and the G-Armor in a single machine. An advanced form of the RX-78-2 Gundam's Core Block System was also introduced. As a result, the ΖΖ Gundam can transform into a mobile armor form called the G-Fortress, which acts as a heavy combat bomber and for cruising in space and on earth. The ΖΖ Gundam can also separate into two independent fighter units, called the Core Top and Core Base. The Core Base, consisting of the ΖΖ's lower body and backpack, is operated through the FXA-07GB Neo Core Fighter attached to its front. The Core Top, consisting of the ΖΖ's upper body and double beam rifle, is operated through the cockpit in its nose unit or more frequently through the Neo Core Fighter, which is in its Core Block form, attached to the lower rear.The team on board the "Argama" typically operates the ΖΖ Gundam with a third Neo Core Fighter piloted by the Gundam's main pilot, Judau Ashta. When combining into the ΖΖ Gundam, forming the G-Fortress mode is the first step and consists of the Core Top and Core Base ejecting their Neo Core Fighters to dock with Judau's Neo Core Fighter in Core Block form. When transforming from the G-Fortress mode to MS mode, the large verniers in the arms and legs are retracted. However, this does not reduce total thrust as the surplus output is supplied to the attitude control thrusters distributed throughout the body and the number of operable thrusters are actually increased. Other parts that move during transformation include the flexible wing binders that also serve as arm-mounted wings shields, the shoulder thruster binders, the large backpack, etc.The engine installed in the backpack is originally meant for ships and could supply power for an entire ship. It also functions as the main thruster unit of the ΖΖ Gundam when in MS form, generating thrust equivalent to that of a large ship. The ΖΖ Gundam's armor is a multi-spaced structure composed of Gundarium γ alloy, capable of withstanding a mobile suit explosion at close range and resisting high water pressure. While it is impossible to completely defend against a direct hit of a mega particle beam, the wings shields are strong enough to prevent a direct hit on the cockpit.With its overall height limited to around 20 meters as requested by AEUG to maintain mobility, the ΖΖ Gundam's design also incorporated the movable frame and magnet coating technology. The generator output which had caused problems during early stages of ΖΖ's development was resolved by incorporating three compact, high-output generators. The movable modules and armor parts, which have a multi-layered structure, are connected by hinges and slide rails which have magnet coating, making them flexible and robust while allowing instantaneous transformation of the ΖΖ Gundam. However, the complexity of the system resulted in poor maintainability and productivity also deteriorated.The control system of the ΖΖ Gundam is equipped with a Bio-Sensor, which is a simplified Psycommu system, as an interface for Newtype pilots. An improved version of the Biosensor installed in the Zeta Gundam, it improves the responsiveness of the mobile suit by supporting the control system with the pilot's brainwaves. However, as a protective measure, the Biosensor is inactive when a pilot with low Newtype abilities boards the ΖΖ Gundam. The unit is mounted in the ΖΖ Gundam's Core Block and the synchronization of the device is improved by inputting the brainwave patterns of the Neo Core Fighter's pilot.The ΖΖ Gundam has a number of powerful weaponry, including two hyper beam sabers which are also usable as beam cannons, a double beam rifle, a 21-tube missile launcher installed on the backpack, and a high mega cannon on the forehead. While the ΖΖ has a very destructive arsenal, its weapons systems require a high level of energy. As a result, the ΖΖ often found itself almost completely drained of power after using its high mega cannon. The ΖΖ Gundam's structural issues due to its complicated construction and transformation systems were eventually corrected with the MSZ-010S Enhanced ZZ Gundam and its massive final upgrade FA-010S Full Armor ZZ Gundam.

The NRX-044 Asshimar is a transformable mobile armor introduced in Mobile Suit Zeta Gundam. It was most notably piloted by Buran Blutarch. Initially developed as an experimental transformable mobile armor at the Oakland Research Institute, the Asshimar was introduced before the Gryps Conflict and was used extensively by the Earth Federation Forces. It was the first mobile weapon to be able to fly in the Earth atmosphere on its own power without the help of a sub-flight system. Asshimar's development was initiated by the Earth Federation Forces as the NRX-044[R] Prototype Asshimar TR-3 [Kehaar] and later continued in form of the NRX-044 Prototype Asshimar TR-3 [Kehaar].Asshimar's design featured additional sub mono-eye sensors along with the main camera sensor. Because its range was restricted to within the Earth atmosphere, a thermonuclear jet engine is used as its main propulsion system. This system uses air for propellant, making it fuel-efficient while effectively giving the Asshimar an enhanced cruising capacity. The engine air intakes are located in the upper thighs of the leg units, which are mainly closed by shutters in its mobile suit mode. In addition, its mobile armor mode possesses excellent aerodynamics as a lifting body, allowing for long-haul flights. The head unit is equipped with a multiple antennas with differential pressure sensors. Its landing gear, which is provided in the chest armor and leg units, is used in conjunction with underside fuselage nozzles for hovering during take-off.While not as powerful as its prototype, the production model of the Asshimar was a formidable machine. With magnet coating technology being applied to its transformation system, the Asshimar was able to transform between its MS and MA modes in only 0.5 seconds. Also, it sported thick armor and was able to withstand most standard mobile suit firearms. However, the chest frame is left vulnerable to attack during transformation. The Asshimar was limited to fielding its custom large beam rifle which was mounted on the main body in MA mode, limiting its usefulness. Nevertheless the Asshimar proved to be a powerful, versatile, and deadly unit and was stationed on various Federation bases on Earth.In the manga Mobile Suit Zeta Gundam Define, it was redesigned by Kyoshi Takigawa. New features include an increase in height, folding wings on the legs, retractable twin machine guns in both forearms, and built-in missile racks on both shoulders. In addition, the large beam rifle was now stored on the side in MA mode (allowing two to be mounted), and mounted on the forearm in MS mode when not in use.

The NZ-666 Kshatriya (クシャトリヤ, Kushatoriya), aka the "Quad-wing", is a mobile suit featured in the novel and OVA series Mobile Suit Gundam Unicorn. It was piloted by Marida Cruz. The Kshatriya was designed with the intention of miniaturizing the NZ-000 Queen Mansa - which was more than 40 meters tall - while retaining its performance. This was done through the implementation of new technology, including the installation of Psycho-Frame around its cockpit. Since Neo Zeon lost the ability to manufacture Psycho-Frame following the Second Neo Zeon War, the Kshatriya became a one-off unit. Another factor that contributed to its miniaturization was that most of its functions are concentrated in its four wings/binders. As a result, the Kshatriya was almost half the size of its predecessor. The four massive wings/binders are also the Kshatriya's greatest features, each containing two mega particle cannons, a funnel container with six funnels, an I-Field generator, flexible thrusters, a propellant tank, and a sub-arm equipped with a small beam saber. Each wing/binder also serves as an AMBAC unit. Like its predecessor, the Kshatriya requires a powerful Newtype pilot.

The ORX-005 Gaplant TR-5 [Hrairoo] is a prototype transformable mobile armor, it is a variant of the ORX-005 Gaplant TR-5. The unit is featured in the photo-novel Advance of Zeta: The Flag of Titans. One problem with the standard ORX-005 Gaplant is the intense G-force produced by the movable shield binders, making it best used with a Newtype pilot. Due to this, when it was first produced, the ORX-005 Gaplant TR-5, it was instead mounted with booster shields used by TR-1 Hazel. Aside from this, a few changes were applied during the TR-5's initial service, such as applying an enhanced sensor unit and V-fin onto the head sensor, and replacing the main engines in the backpack with a thermonuclear hybrid jet-rocket engine, as with other machines of the TR series. For its main armament, the TR-5 carries a long blade rifle, which is mounted on the underside of the machine in mobile armor form.Later on, near the end of Gryps conflict, the TR-5 Hrairoo is further refined as an Area Dominance Mobile Armor, similar in purpose to RX-78GP03 Gundam "Dendrobium", but for all three major environment (atmosphere, ground, space). The booster shields were changed back to the moveable shield binders. The side armor and back armor have additional thrusters and armor mounted onto it, greatly increasing its maneuverability and defense; the back waist armor also comes with a moveable hardpoint, allowing it to mount an additional manipulator arm. The front waist armor is also enhanced, and thus now has spray beam emitters for defense, as well as two hidden arms underneath. The long blade rifle is upgraded to be able to equip 2 booster-type shields, which further increase its mobility (standard booster shields), attack power (micro missiles shields), or defense (spray beam shield).Furthermore, it can be equipped with the Hrududu II support unit. The shoulders mount booster-equipped claw units with beam emitters that can connect to the long blade rifle to form a very powerful beam cannon. With the Hrududu II, Gaplant gains four more hard points, allowing it to mount additional manipulator arms, shield units, and eventhe arms of the Psyco Gundam.

The PMX-003 The-O is a mobile suit from the series Mobile Suit Zeta Gundam and is piloted by Paptimus Scirocco. The fourth of five mobile suits built by the Newtype Paptimus Scirocco on the Jupitris, the PMX-003 The-O is Scirocco’s personal mobile suit, and perhaps the most powerful. It has an independently developed control system to take advantage of his rare spatial recognition abilities, and its control interface is specifically tuned for Scirocco's use, making The-O impossible to pilot except by Scirocco himself. The generator output specifications are modest at less than 2,000Kw; however, The-O is equipped with a large-scale thermonuclear reactor comparable to that of a warship.The-O has very thick armor that can withstand direct beam hits, such as from the AMX-004 Qubeley's funnels. Although very bulky and heavy, it is outfitted with enough thrusters to maneuver and move at very high speeds, demonstrating powerful thrust similar to mobile armors. It is also extremely agile despite its massive frame, with performance that greatly surpasses common MS and displaying tremendous space combat capabilities. By taking advantage of The-O's large size, it is possible to load large amounts of propellant into various parts of the body and the skirt armor to extend operation time. The leg and armor units incorporate a complex multi-joint structure that allow a high degree of freedom of movement. These parts significantly differ from those found in typical mobile suits.In terms of weapons, The-O is only equipped with four beam swords and a beam rifle. However, thanks to its unique sub-arms, The-O can wield all four swords at once, something that no other mobile suit could do, allowing The-O to excel at close quarters combat. The-O is a robust machine designed with emphasis on mobility instead of excessive firepower, and features an excellent interface that reflects the skill of the pilot.The last special feature of The-O is the Bio-Sensor (no relation to the device installed in the MSZ-006 Zeta Gundam), which functions like a psycommu system and allows Scirocco to more easily interface with his suit.

The RGC-83 GM Cannon II is a mobile suit introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. The successor of the RGC-80 GM Cannon, a medium-range support mobile suit developed in the late stage of the One Year War, the RGC-83 GM Cannon II was based on the RX-77D Guncannon Mass Production Type and inherited the Chobam Armor concept of the RX-78NT-1 Gundam NT-1. It was the culmination of the Federation's artillery support mobile suit development.Thanks to improvement in technology and productivity, the GM Cannon II was installed with a powerful generator, allowing it to be equipped with two shoulder-mounted beam cannons. This made it the first mass production unit to have high-powered beam cannons. These beam cannons were usually powered by the generator itself, but could also be powered by the two Energy CAP mounted on its backpack. A sighting device located on the pilot seat's headrest can be used to aim the beam cannons. For precision shooting under gravity, the stabilized gear on the waist could be deployed to stabilize the machine.The GM Cannon II's other weapons included a pair of head-mounted 60mm vulcan guns, a shortened beam saber stored in the left forearm, and the same GM Rifle and shield used by the RGM-79N GM Custom. Due to its role as a fire support mobile suit, the beam saber was only meant for close-quarters self-defense and it rarely had the chance to use it. The GM Cannon II also has relatively poor mobility due to the mass of its weapons and armor.The design of the GM Cannon II's basic components prioritized parts interchangeability with GM type mobile suits. Parts of its exterior was covered in composite armor, similar to the Chobam Armor used by the RX-78NT-1 "Alex". This composite armor improved bullet resistance while keeping the mobile suit's weight down. Unlike the Alex's Chobam Armor, the composite armor was built directly onto the frame and could not be purged when damaged. Despite their structural differences to Alex's armor, the composite armor was often referred to as "Chobam Armor" for convenience.Like the GM Custom, there was a plan to mass produce the GM Cannon II, but due to issues such as cost and the fact that the machine was meant to operate alongside the GM Custom, only a few units were actually deployed. After the Delaz Conflict, the project itself, including its development staff, was placed under the control of the Titans. The GM Cannon II's production was halted and a direct successor to it was never developed.

The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than luna titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor.The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

The RGM-79C GM Type C (also known as GM Kai and GM Late Type) is a mass production mobile suit based on the RGM-79[E] GM Early Type. It was introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. Based on the late production type of the RGM-79 GM, the GM Type C features improved generator output and incorporates several new technology, such as sensor and devices from the GM D type and G type. Its various components were all designed to maximize reliability, ease of production, ease of maintenance, and ease of modification. It was intended to achieve the goals originally set by Operation V.

The High Grade Universal Century (HGUC) RGM-79D GM Cold Districts Type is a 1/144 scale kit released in 2003.

The RGM-79FP GM Striker is a ground close combat mobile suit and variation of the RGM-79C GM Type C. It was featured in the original design series Harmony of Gundam, the manga series Mobile Suit Gundam - Acguy: 2250 Miles Across North America, as well as the manga series Mobile Suit Gundam: We're Federation Hooligans!! and its sequel manga series Mobile Suit Gundam Katana. From the data collected by the RX-78-2 Gundam and the RX-79［G］ Gundam Ground Type, the Earth Federation Forces recognized the frequent occurrence of close combat during mobile suit battles, as well as the effectiveness of the Principality of Zeon's close combat-specialized mobile suit, the MS-07B Gouf. It was decided that the RGM-79C GM Type C, one of the general performance improvement variants of the RGM-79 GM still in development, would serve as the basis of a specialized close combat GM variant.The GM Striker was equipped with a set of full body additional armor known as Wearable Armor, based on the reactive armor used by the RGM-79F Desert GM as well as existing research on Chobam Armor, designed to protect the mobile suit from the ballistic weapons used by Zeon mobile suits. It was also fitted with a high-thrust backpack and improved leg thrusters. Weapons wise, it is equipped with one to two Beam Sabers, two Vulcan Guns, a 100mm Machine Gun, as well as an experimental Twin Beam Spear, a weapons with twice the firepower and reach of the beam saber. Finally, it has a Spike Shield, which can serve as a striking weapon in addition to defense.

The RGM-79G GM Command is a mobile suit that first appeared in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the ground use GM Command, and the space use RGM-79GS GM Command Space Type. Both suits were also used to collect data for the development of next generation mass production models.The GM Command is also called the "Colony Type" as it specialized in defending bases in space colonies and surrounding areas. For this reason, its output and weaponry were adjusted to reduce fatal damage to the colony's structure and walls. Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command and GM Command Space Type. The placements of the thruster verniers on the GM Command's backpack are optimized based on simulations of operation within colonies, and they are pointed downwards for movements under gravity. Various sensors are also added to the backpack, replacing the normal GM's backpack beam saber rack.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures. The suit served as the base for the RGM-79SP GM Sniper II.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The RGM-79[G] GM Ground Type is a ground based predecessor to the RGM-79 GM. It first appeared in Mobile Suit Gundam: The 08th MS Team. An early prototype of the Earth Federation Forces' mobile suit mass production project, the GM Ground Type was developed before the RX-78-2 Gundam's operational data was recovered. Even though it was only able to operate on Earth, its internal parts were all tuned for ground combat, and it was equipped with Luna Titanium armor, causing its mobility, maneuverability, and general performance to surpass the later RGM-79 GM.It is said that its performance under gravity even rivals that of the RX-78.The GM Ground Type was a simplified version of the RX-79[G] Gundam Ground Type, and produced using the same production line.Compared to the Gundam Ground Type, the GM Ground Type omitted the chest-mounted Vulcan gun and multi-launcher, the weapon container mount on the backpack, and was equipped with a less powerful generator.It also did not incorporate parts from the RX-78 series, though its head unit was similar in specs to that of the RX-78's.Since it was produced after the production format was established, its ease of production, ease of maintenance and availability of parts were all greater than its predecessor.Due to its use of Luna Titanium alloy, it was unsuited for mass production and produced in limited numbers. However, the GM Ground Type was important in establishing the EFF's mobile suit production framework. The operational data it collected contributed to the development of later mobile suits.Finally, the basic structure of its head was later inherited by the RGM-79 GM, becoming the iconic face of Federation mass production mobile suits.

The RGM-79GS GM Command Space Type is a mobile suit introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the space use GM Command Space Type, and the ground use RGM-79G GM Command. Both suits were also used to collect data for the development of next-generation mass production models.Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command Space Type and GM Command. This difference in the backpack is the biggest characteristic that differentiates the two machines, and is related to the different gravitational environment that they operate in, 0G and 1G respectively. While the GM Command had downward-pointing thrusters concentrated on the bottom of the backpack, the GM Command Space Type's thrusters are spread around the backpack and faces various directions. The GM Command Space Type's thruster output is also boosted by 10%, has more apogee motors, as well as a greater propellant capacity for higher operating time.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize the mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

The RGM-79N GM Custom is a limited-production general-purpose mobile suit introduced in Mobile Suit Gundam 0083: Stardust Memory. Developed as part of the Federation Forces Reconstruction Project that began in U.C. 0081, the design of the RGM-79N GM Custom was based on the RGM-79SC GM Sniper Custom, the RGM-79G GM Command, the RGM-79GS GM Command Space Type, and the RX-78NT-1 Gundam NT-1. It was developed at Augusta Base and incorporated many parts that were developed for Gundam NT-1, which was originally considered for mass production. Because of this, the GM Custom's specifications were considered top class even among Augusta series mobile suits, which were already renowned for their high performance. Its thrust was almost twice that of previous GMs and its generator output rivalled Gundam type mobile suits, making it one of the Federation's highest performing mass production unit prior to the Delaz Conflict.Additionally, Magnet Coating was said to be applied to the shoulder and elbow joints to improve their flexibility. However, the GM Custom's specifications did not excel at any one aspect and was derided as "remarkable for being unremarkable" by some. Also, its high performance came at the price of high production cost. As a result, even though it was planned for mass production, only a small number of units were manufactured and assigned to ace pilots. Various aspects of these units, such as the trims of the sub thrusters, and the response and torque of the actuators in the four limbs, were adjusted to better suit their pilots. Following the end of the Delaz Conflict, the Titans took over the project and made some changes to the GM Custom's designs, creating the RGM-79Q GM Quel.

The RGM-86R GM III is a mass-production general-purpose mobile suit introduced in the anime Mobile Suit Gundam ZZ. Its design was later updated for the novel and OVA Mobile Suit Gundam Unicorn. A mass-produced mobile suit of the Earth Federation Forces developed in accordance with the "GM III Plan" as a successor to the GM II. It was deployed as the main unit during the First Neo Zeon War. By actively introducing new technologies while maintaining productivity, some specs have acquired performance equal to or higher than Gundam Mk-II's. Its backpack is a mass production model of the Gundam MK-II's, and mobility and maneuverability have exceeded the level of existing mass production machines. Although this backpack has a slightly different shape, it maintains the same functions as the Mk-II's while improving cost performance, and the docking mechanism with the FXA-05D G-Defenser remains. The shoulders and waist can be equipped with missile pods and missile launchers, respectively, allowing the GM III to function as an MS for medium- and long-range support.

The RGM-89 Jegan is a mass-produced general-purpose mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. A state-of-the-art machine adopted by the Earth Federation Forces in U.C. 0089 as its main force mobile suit, the Jegan comes from the lineage of the RGM-79 GM as inferred by its "RGM" model number. However, it was not developed by the Earth Federation Forces' own engineers like most previous RGM series mobile suit. Instead, it was produced and supplied by the Anaheim Electronics (AE). Created through combining the Earth Federation Forces' expertise of the GM series with AE's MS development technologies, the Jegan's performance is significantly higher than the RGM-86R GM III. It also has improved productivity due to the use of Titanium Alloy Ceramic Composite armor, as well as high operability, and excellent versatility. All these allows it to become the "next-generation standard MS", and it operated as the main force MS for a long period of time. Several variations of the MS were also developed. The original Jegan is sometimes referred to as "Jegan Type-A" to differentiate it from later variants, and should not be confused with the later RGM-89R Jegan A-Type.The Jegan highly exemplified the original concept of MS being "mobile infantry for melee combat", and is designed for close combat in and around space colonies. It can also operate under gravity without any modifications. With a backpack containing a single main thruster, two small thrusters at the bottom, and two articulated vernier arms at the top, the Jegan's thrust and acceleration performance could match-high mobility-type machines from the Gryps War-era. Its backpack also featured exchangeable propellant tanks. Also notable are the verniers for attitude controls on the front shoulder armor, enlarged centre shoulder armor sections to fit the side thrusters, and a calf-mounted thruster on each leg. The use of lightened armor grants the machine high maneuverability, its front skirt armor is removed to maintain the legs' range of articulation, while its head has a long-range sensor installed in the forehead in addition to the fixed main sensors. The Jegan is armed with mainly short-range weaponry, including a beam saber, a short-range type beam rifle, three hand grenades, a vulcan pod system, and a shield with twin missile launchers.

The RGM-89De Jegan [ECOAS Type] (aka Jegan "Four Eyes") is a special operations mobile suit based on the RGM-89D Jegan for use by ECOAS. It first appeared in the OVA series Mobile Suit Gundam Unicorn. The RGM-89De Jegan [ECOAS Type] is a special version of the RGM-89D Jegan D Type used by the Earth Federation's special task group ECOAS, and are deployed in ECOAS missions that are expected to involve direct combat with mobile suits. It has a special visor and extra chest armor for increased survivability. The ECOAS Type features the same armaments as the normal Jegan, consisting of a beam saber, a beam rifle, a three slot hand grenade rack, and a shield that has two two-tube missile launchers built in. It could also be outfitted with a bazooka for increased firepower and custom units with different weaponry also exist.

The RGM-89S Stark Jegan is a mass-production anti-ship assault mobile suit. First appearing in Char's Counterattack Mobile Suit Variations line, it was later redesigned for the novel/OVA Mobile Suit Gundam Unicorn. The Stark Jegan is a special forces-use version of the RGM-89D Jegan D Type designed for anti-ship warfare, and has improved performance due to the additional armor and thrusters. It also incorporated feedback from its prototype, the RGM-89S Prototype Stark Jegan, and can mount missile pods on its shoulders for support use. Thus, it also inherited the functional concept of the RGM-86R GM III. Some of the added armor and the missile pods can be purged when required, with the subsequent balance adjustment being performed automatically.

The RGM-96X Jesta Cannon is a mobile suit introduced in Mobile Suit Gundam Unicorn and used by the Londo Bell task force. Like its base unit, the RGM-89 Jegan, the RGM-96X Jesta can adapt to different needs through the use of dedicated option parts, resulting in multiple variants. An example of this is the Jesta Cannon, a heavy armed variant with enhanced firepower via the addition of a beam cannon, a quadruple multi-launcher, more hand grenades and an enhanced beam rifle. It also has added body armor, including an arm-mounted shield, but their placement is kept to a minimum after considering weight balance. When needed, the added armor can be purged instantly using explosive bolts.To handle the added weapons, the Jesta Cannon's fire control systems has been improved. Not only can the Jesta Cannon served as a mid-range fire support unit, which is a function synonymous with mobile suits that have the word "Cannon" in their name, it can also fight at the frontlines without any issues due to its enhanced offensive capabilities. The Londo Bell flagship, Ra Cailum, that is carrying 12 Jestas for evaluation tests is also loaded with sufficient parts for converting 5 of them into the Jesta Cannon.