Products

The FA-78 Full Armor Gundam (Thunderbolt Ver.) is a mobile suit that appears in the manga Mobile Suit Gundam Thunderbolt and its animated adaptation. It is piloted by Io Fleming. A heavily armored and highly maneuverable Gundam-type mobile suit deployed by the Moore Brotherhood. There was another type of Full Armor Gundam with similar model number, the FA-78-1, but it had different details and equipment. Both mobile suits were developed under the ‘Full Armor Operation’, and their differences were a result of experimenting with various systems and equipment.The Full Armor Gundam was fitted with numerous pieces of body armor, a large backpack and had much more weaponry than other mobile suits of its time. Like other mobile suits of the Moore Brotherhood, the Full Armor Gundam had special seals on its joints and large backpack to protect them from the debris drifting in the Thunderbolt Sector. Besides the standard beam sabers, it was also armed with a twin beam rifle, five rocket launchers, a large beam cannon, a 6-tube missile pod and numerous missiles stored in various body armor.Using the two sub-arms on the large backpack, the machine could wield up to four shields, greatly increasing its defensive capabilities. To prevent the weight of the added equipment from reducing the mobile suit's mobility, thrusters and apogee motors were installed on the shoulders, legs and large backpack. The large backpack was also fitted with two rocket boosters, and the Full Armor Gundam's total thrust was considered to be comparable to a high mobility-type mobile suit.The Full Armor Gundam's added body armor, the large backpack and most of the weaponry could be purged when they are damaged or not required, reducing dead weight. After witnessing the power of the Moore Brotherhood's Full Armor Gundam, the Zeon's Living Dead Division, which was operating in the same area, decided to deploy the MS-06R Zaku II High Mobility Type (Reuse "P" Device).

The GAT-X102 Duel Gundam is a mobile suit introduced in the anime Mobile Suit Gundam SEED. It was piloted by Yzak Joule. The Duel Gundam is the first unit to be developed in the Earth Alliance's G Project series of prototype MS. Equipped with the new Phase Shift armor that makes it nearly impervious to most physical weapons, the Duel is designed as a general-purpose machine that has well-balanced performance, and also serves as a development base for the other MS in the project.The Duel's armament consists of two head-mounted "Igelstellung" 75mm multi-barrel CIWS guns, which later become standard weaponry on most Earth Alliance's suits to intercept incoming missiles and closing in enemy units, two beam sabers stored on the backpack and hand-carried for use in close combat, a 57mm high-energy beam rifle with an attached 175mm grenade launcher for ranged combat, and an anti-beam coated shield for defense. Duel also has a rail bazooka as an optional weapon, but it was taken and used by MBF-P01 Gundam Astray Gold Frame to escape from Heliopolis.After being stolen by ZAFT and damaged in battle with the GAT-X105+AQM/E-X01 Aile Strike Gundam, the suit is upgraded with the Assault Shroud. The Assault Shroud is a set of ejectable armor mounted on the Duel’s body to enhance overall combat performance. It adds a "Shiva" 115mm railgun to the right shoulder and a 220mm 5-barrel missile pod to the left shoulder for additional firepower, as well as various leg and backpack-mounted thrusters for better mobility. Although the equipment worked well in space, it performs poorly under gravity due to its bulk.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The GAT-X105+P202QX Strike Gundam IWSP (aka Strike IWSP) is a prototype mobile suit introduced in Mobile Suit Gundam SEED MSV. The Integrated Weapons Striker Pack (IWSP) combines the primary characteristics of the Aile, Sword and Launcher Striker Packs, allowing the Strike Gundam to handle different combat situations with one set of equipment. It also grants mobile suit the ability to fly within the atmosphere. Although powerful, the IWSP is highly complex and difficult to use.The IWSP was originally developed by PMP Company, but was abandoned due to energy issue. Orb's Morgenroete Inc. later acquired one of the prototypes and solved the energy issue using their superior battery technology. As the Strike IWSP has no ranged beam weapon, it can be equipped with the standard beam rifle if necessary.After the war, the IWSP is revived by Actaeon Industries in the form of AQM/E-M1 IWSP, which is functionally identical to the earlier P202QX IWSP, despite some differences in appearance. Phantom Pain fit this IWSP pack onto their newly built Strike Gundam which has darker phase shift armor colors. Data obtained from this Strike Gundam IWSP was used in the development of Strike Gundam E, as well as the Noir, Jet and Doppelhorn striker packs.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output.[1] The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.

The GAT-X105E+AQM/E-M1 Strike E + I.W.S.P. is a variant of the GAT-X105E Strike E introduced in Mobile Suit Gundam SEED C.E. 73 Δ Astray. It is piloted by Sven Cal Bayang and Lukas O'Donnell. The Integrated Weapon Striker Pack (I.W.S.P.) combines the primary characteristics of the Aile, Sword and Launcher Striker Packs, allowing the equipped mobile suit to handle various situations with only one set of equipment. As such it is very heavy, very powerful, very energy intensive and difficult to use. The I.W.S.P. also grants mobile suit the ability to fly within the atmosphere and was originally completed by Orb Union's Morgenroete Inc. during the last days of the first war with the model number, P202QX. AQM/E-M1 is a new model of I.W.S.P. developed by Actaeon Industries after the war, it is functionally identical to the P202QX. When using the I.W.S.P., the Strike E can also be equipped with either Strike or Duel Gundam's beam rifle as its optional handheld weapon.

The GAT-X105E Strike E was a Mobile Suit introduced in the manga Mobile Suit Gundam SEED C.E. 73 Δ Astray.

The GAT-X303 Aegis Gundam is a Mobile Suit introduced in the anime Mobile Suit Gundam SEED. It is piloted by Athrun Zala. Designated as the commander unit of the Alliance's G Project due to its enhanced communication and analysis capabilities, Aegis also has heavy attack power as well as Phase Shift armor and can transform into a mobile armor (MA) due to its X300-series frame. In MA mode, it has two different sub modes, 'Cruise' and 'Attack'. When in 'MA Cruise Mode', Aegis has higher speed and acceleration, while in 'MA Attack Mode', it can destroy enemy ship/mobile suit with its "Scylla" 580mm energy cannon directly or grab onto them with its four limbs first then destroy them using the cannon. Other weaponry includes two head-mounted CIWS, a hand-held beam rifle, a shield and a beam saber in each limb.Aegis also has a large sensor unit at the top of its head and unlike most suits, its main thrusters seem to be located in the side binders on its waist. Due to the transformation system, Aegis's internal structure is more complex and it is for this reason that there are no mass production variants of the suit. The three different modes (MS Mode, MA Cruise Mode and MA Attack Mode) also means that Aegis's pilot needs to have higher skills to be able to use the suit effectively.

The GF13-001NHII Master Gundam is a mobile fighter introduced in the anime Mobile Fighter G Gundam. A state-of-the-art mobile fighter made by Neo Hong Kong, and a developmental improvement of the Kowloon Gundam. Its body is made up of DG cells, allowing it to disguise itself as the Kowloon Gundam. Although its body is made up of DG cells, it is completely controlled by Master Asia's strong mental power, so it does not self-propagate or self-evolve, and uses its abilities only for self-regeneration. This machine has strong characteristics as a dedicated fighting machine developed from the Kowloon Gundam, and its flexible joint structure and thrusters allow it to move in a variety of ways, reproducing many of the techniques of Master Asia. It is a member of the Devil Gundam Legion, and is treated as the leader of the Four Heavenly Kings subgroup that consisted of four Gundams.

The GF13-017NJ Shining Gundam is a mobile fighter featured in the anime Mobile Fighter G Gundam. It was built by the nation of Neo Japan for the 13th Gundam Fight and piloted by Domon Kasshu, as well as occasionally by his crew member Rain Mikamura. The Shining Gundam was developed for the 13th Gundam Fight by Dr. Mikamura, a Neo Japan scientist. Designed with an emphasis on mobility, it has an excellent balance of offense and defense, and is equipped with the ability to faithfully reproduce the many techniques of the school of the "Undefeated of the East," performed by Domon Kasshu, the champion of colony martial arts. Since the Shining Gundam is a machine that exerts its maximum potential in close combat, there are few fixed armaments.A special feature of this machine is that the emotions and conditions of the passengers are reflected in the machine's performance. In addition, a mechanism that can power up the machine in stages has been introduced.Normal ModeThis form is the default mode of Shining Gundam. It is used when Domon is fighting another opponent without the use of the Shining Finger.Battle ModeThis is the first of Shining Gundam's high-powered modes, which allows it to employ its devastating Shining Finger attack. In this form, the Gundam's arm covers pop out, and its face armor opens for extra ventilation. This transformation briefly increases Shining Gundam's speed and offensive capabilities, but reduces its sensor effectiveness, adaptability, and defensive strength.Super ModeThe second of Shining Gundam's high-powered modes. In this form, Shining Gundam's overall performance is increased by 50%, its speed and offensive power are doubled, and the panels of its armor open up to reveal a variety of cooling systems, boosters and generators. The Super Mode is powered by the emotional energy of its pilot Domon, who at first could only attain this state when he lost control of his rage and passion. However, through the instruction of Schwarz Bruder, Domon learned to attain the serene state of mind of a true warrior, allowing him to activate the Super Mode at will.True Super ModeShining Gundam's True Super Mode is similar to the regular Super Mode, but changes Shining Gundam's colors completely gold. The overall capabilities of the unit are increased tremendously. However, this mode can only be used when Domon is in a serene state of mind (Meikyō Shisui (明鏡止水, Clear Mirror and Still Water) in the original Japanese version). Later, after Domon had replaced Shining Gundam with the God Gundam, both he and the members of the New Shuffle Alliance achieved variations of the True Super Mode called "Hyper Mode".

The GF13-017NJII God Gundam (aka G Gundam, Burning Gundam in the English dub) is the titular Mobile Fighter of Mobile Fighter G Gundam. It was the second Mobile Fighter used by Neo Japan in the 13th Gundam Fight, and is piloted by Domon Kasshu. The successor of the GF13-017NJ Shining Gundam, the God Gundam was developed by Dr. Mikamura almost single-handedly and customized for Domon Kasshu. Even in Normal Mode, its power surpassed that of the Shining Gundam's Super Mode. In addition, it could achieve an even more powerful state called Hyper Mode.Its chest was equipped with the Energy Multiplier System, a unique system that allows energy to be refined in a similar manner to Qi. When piloted by Domon, the King of Heart emblem would appear upon it. It was part of a larger system called the Artificial Aura Generator. The six Core Lander wings on its back (which were named "Dream", "Illusion", "Bubble", "Shadow", "Dew", and "Lightning", after a passage from the Diamond Sutra) and the two short antennas on its head serve as magnetic field generating devices, while the two long antennas function as intelligence-gathering devices. When Hyper Mode is activated, the Energy Multiplier opens up, the six wings deploy, and a ring of light appears on the God Gundam's back, coating it in a magnetic field that improves its mobility through a full-body magnet coating.The God Gundam was armed with a pair of head-mounted vulcan guns, a pair of 3-barrel machine cannons mounted on the upper chest, and a pair of beam swords known as "God Slash". In Hyper Mode, it was capable of using a finisher move known as Bakunetsu God Finger, a refined and more powerful version of Shining Finger. Its forearms were covered in armor known as "G Knuckles" or "God Finger Protectors", which were based on the finishing move of Neo Albania's Gundam Fighter during the 12th Gundam Fight.

GN-0000+GNR-010/XN 00 XN Raiser (aka 00 XN Raiser, pronounced Double-Oh Sun Raiser), is the combination of the GN-0000 00 Gundam and the GNR-010/XN XN Raiser. It appears in the Mobile Suit Gundam 00V side story. 00 XN Raiser carries a pair of GN Buster Sword IIIs that can combine into one large sword. The additional pair of manipulator arms on the XN Raiser allows the 00 XN Raiser to carry more weapons, as well as grant it another pair of arms for combat use. XN Raiser's binders do not dock into the 00 Gundam's twin GN Drives; instead, they fold up when the XN Raiser is docked onto the 00 Gundam. The entire system docks onto the 00 Gundam's back as a weapons backpack.

The GN-0000/7S 00 Gundam Seven Sword (aka 00 Gundam Seven Sword, 00 Seven Sword), is a weapons pack/equipment variation for the GN-0000 00 Gundam that appeares in the Mobile Suit Gundam 00V side story. It is later given a additional weapon and re-designated as GN-0000GNHW/7SG 00 Gundam Seven Sword/G. With Celestial Being (CB) rebuilding their organization after their defeat in A.D. 2308, they began development of the 3.5 and 4th generation Gundams. The lone 4th generation Gundam, the GN-0000 00 Gundam, had undergone continuous beta testing of its experimental Twin Drive System by members of CB's engineering team and Tieria Erde. The original 00 Gundam was made as a close combat mobile suit, normally equipped with its GN Sword II. However, CB soon realized that the 00's basic arms would not be enough to counter the rapidly advancing mobile suits developed by the Earth Sphere Federation. Taking inspiration from the GN-001 Gundam Exia's diverse Seven Sword System, CB engineers created the Seven Sword package for the 00 Gundam, improving the units effectiveness in close combat while also attempting to stabilize the Twin Drive System.The original Seven Sword System was designed specifically for the Gundam Exia. Armed with one GN Sword, two GN Blades, two GN Beam Sabers and two GN Beam Daggers, the package was meant bring out the full close combat fighting strength of the Exia. Coupled with the close combat fighting style of its Gundam Meister Setsuna F. Seiei, Exia served its role as the close combat Gundam prior to is disappearance after A.D. 2308. Seeking to do the same with the 00 Gundam, CB engineers incorporated a mix of technologies into the 00 Gundam's Seven Sword armament. Befitting its name, the 00 Gundam Seven Sword was armed with 7 close combat weapons; the experimental GN Katars, the standardized GN Beam Sabers, the long and short GN Sword IIs, and the large GN Buster Sword.The 00's GN Beam Sabers were significantly improved from the Exia's. Originally, Exia had a set of four beam blades, a pair of daggers and a pair of normal beam sabers. While they were helpful in a few situations, the sabers' lengths were non-adjustable for differing combat situations. With that in mind, CB engineers created the beam sabers to be adjustable in length, increasing their overall efficiency in combat.The GN Katars are mounted on the sides of the 00 Seven Sword's kneecaps, which must be exchanged with the standard white kneecaps to properly holster the weapons. The design is taken from the famous Indian weapon, as well as the 00's GN Shields. The GN Katars are meant as push daggers for stabbing into an enemy. To enhance their capabilities, CB engineers equipped the katars with GN Particle infused blade edges, consisting of the material used in GN Condensers. While attacking, the particles surrounding the katar are converted to heat, and the heat is transferred to the object the katar comes into contact with. However, the heat generated by the particles can be too much for the katars themselves to tolerate. The experimental weapons inspired a line of other condenser infused weaponry for the next generation of Gundams.Taking a design cue from the Exia's GN Blades, CB engineers created the GN Sword II Long and GN Sword II Short. While both swords are physical exaggerations of the aforementioned blades, they vastly differ in function. The GN Sword II is more of a traditional broadsword, able to switch between rifle and sword mode faster than the original Exia could. The long GN Sword II focuses on ranged combat, the only such weapon in the 00 Seven Sword arsenal to do so. The drawbacks are that the long sword uses more particles and a decreased rapid fire capability. In contrast, the GN Sword II short was developed analogous to the GN Short Blade from the Exia. The shortest sword in the Seven Sword armament, the Short Sword's blade tip is attached to a wire, which can be shot out towards an enemy and retracted quickly. Despite these armaments, the signature weapon of the Seven Sword arsenal is the GN Buster Sword.At nearly the same height as the 00 Gundam, the GN Buster Sword is a massive weapon which serves multiple purposes. CB engineer Ian Vashti analyzed the Buster Sword of a GNX-607T/AC GN-XII Sword captured by Fon Spaak in the sword's development. Normally stored on the left GN Drive mount, the GN Buster Sword can expand its frame to particle vents to create a massive GN Field. The scope of the field is so large that it can protect allied suits. When the sword is actively wielded, it is a top class melee weapon. Though the array of weapons were tailored to suit the fighting style of Setsuna F. Seiei, the Meister as well as his Gundam, had been missing during the Seven Swords' development. On top of that, the pack did not stabilize the highly unstable Twin Drive System, and a separate support unit, the GNR-010 0 Raiser, was given a higher priority than the Seven Swords. However, CB hadn't forgotten about the Seven Swords configuration.After the battle with the Innovators, the 00 Gundam had taken some damage, but the greater concern was the fact that its GN Drives were critically damaged in the duel between the GN-000 0 Gundam and the GN-001REII Gundam Exia Repair II. With the 5th generation Gundams in construction, CB developed a modified version of the 00 Gundam Seven Sword, the GN-0000GNHW/7SG 00 Gundam Seven Sword/G as a test-bed for future weapons and systems.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

GN-001/hs-A01 Gundam Avalanche Exia (aka Gundam Avalanche Exia, Avalanche Exia) is a variant of the GN-001 Gundam Exia appearing in the side stories Mobile Suit Gundam 00V and Mobile Suit Gundam 00V: Battlefield Record. The Gundam Avalanche Exia is the Celestial Being's Gundam Exia equipped with additional high mobility unit known as "Avalanche Unit". The Gundams have exceptional flight control capabilities through the use of GN Particles, but their speed in the atmosphere and in space are generally inferior to that of specialized high-speed units such as aircrafts. Celestial Being's general mechanic, Ian Vashti, designed and created the Avalanche Unit to grant Exia a high level of mobility comparable to an aircraft's. This concept of utilizing a mobile suit like an aircraft is very similar to the AEU's, and might have been because Ian was previously the chief mechanic of AEU's armed forces and is highly skilled in such utilization of mobile suit.The multiple parts that make up the Avalanche Unit are equipped with GN Condensers and by discharging all their stored GN Particles through various verniers simultaneously, the Avalanche Exia can achieve a higher level of mobility. Additionally, during high-speed movements, the Avalanche Exia's forearm and shoulder parts are linked together in a quasi-transformation like manner. This reduces air resistance and generates a thin GN Field on the machine's surface to control the airflow on the exterior. The name, Avalanche, carries the meaning of "passing by in an instant, consuming everything in its path" and like its name, the mobile suit can outspeed the latest aerial combat mobile suits such as the SVMS-01 Union Flag, AEU-09 AEU Enact and even its fellow Gundam, the transformable, high-speed GN-003 Gundam Kyrios. The "hs" in its model number stands for "High Speed" and the "A01" means "Avalanche type Unit 1".The drawbacks of the Avalanche Exia are that it takes an hour to fully charge the Avalanche Unit's GN Condensers with GN Particles, which will be completely discharged in 10 minutes, limiting the use of the mobile suit to an extremely brief period of time and restricting its travel range. Even so, the Avalanche Exia still has high utility value as it allows the Exia to reach its combat location swiftly. While the one-hour charging time seems to make the Avalanche Exia unusable for unplanned missions, this issue is resolved to a certain degree as Ian always keeps the Avalanche Unit's GN Condensers fully charged. It is possible to extend the discharge time of the GN Particles and increase the travel range by concentrating the Avalanche Exia's supply of GN Particles to the verniers as well as lighten the Gundam by removing its armaments.The Avalanche Unit's GN Condensers are larger than regular ones and can be charged with more GN Particles. Unlike the regular GN Condensers that can display information about their status on the surface, the Avalanche Unit's GN Condensers are completely internalized and so their status are instead displayed on the Gundam's chest GN Condenser. As the Avalanche Unit's primary purpose is for high-speed movement, it does not come with additional weaponry. All the weapons of the normal Exia remain usable by the Avalanche Exia, but due to its higher speed, the Exia's characteristic seven swords have improved penetration and destructive power. To prevent the seven swords from being a hindrance during high-speed movements, they are all stored on the Avalanche Exia's upper body, with the majority mounted on a pair of weapon holders known as "Weapon Arms".The Avalanche Exia was seen relatively early during Celestial Being's armed interventions, and the Avalanche Unit's weight is kept below 5 tons as that was initially thought to be the maximum possible weight without negatively affecting the Gundam's balance. However, this assumption was later found to be wrong, and additional equipment is developed for the Avalanche Exia, resulting in the GN-001/hs-A01D Gundam Avalanche Exia', which is better adapted for operating in space. To prevent the Avalanche Unit from being a dead weight after use, its parts can be instantaneously purged from the Exia prior to the Gundam engaging in close combat.

The GN-003 Gundam Kyrios (aka Gundam Kyrios, Kyrios) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Allelujah Haptism. In AD 2307, the paramilitary organization, Celestial Being, deployed four third-generation Gundams with the objective of eradicating world conflicts through armed interventions. The Gundam Kyrios is one of them and its most prominent feature is a transformation mechanism for switching between MS Form (also known as "MS Mode") and Flight Form (also known as "Flight Mode", "Flight Position") which was tested by its predecessor, the second-generation GNY-003 Gundam Abulhool. The Kyrios' mobility and maneuverability are greatly enhanced in Flight Form, exceeding those of the other Gundams and mobile suits utilized by the three major powers. The transformation mechanism also grants high operability, allowing Kyrios to carry another mobile suit on top during Flight Form and a partial transformation where its upper body turns into that of the MS Form's is also possible. Like its fellow Gundams, Kyrios has a semi-perpetual GN Drive in the center of its body that provides almost limitless energy and produces special, multifunctional GN Particles.Mobile suits capable of switching between MS and Flight Forms are also deployed by two major powers, but they are not designed with mid-air transformation in mind like Kyrios. The old VMS-15 Union Realdo and AEU-05 AEU Hellion (belonging to the Union and AEU respectively) have incomplete transformation mechanisms, requiring parts swapping in designated facilities to operate in the different forms; although their respective successor, the SVMS-01 Union Flag and AEU-09 AEU Enact, can transform in mid-air, this is achieved through a piloting technique known as "Graham Maneuver" (also known as "Graham Special") and not an inherent feature. On the other hand, the Kyrios has a complete transformation mechanism enabled by a control system using the special GN Particles. As a result, not only can Kyrios freely transform within and outside of the atmosphere, it also gains mobility, maneuverability and versatility that greatly surpassed those of other mobile suits with Flight Forms. It should be noted that Kyrios' transformation still requires some degree of piloting skills, but can theoretically be performed by anyone.The Kyrios' cockpit is similar to other Gundams', but the control system differs due to its Flight Form and the pilot seat can rotate to match the different forms. Another feature that takes into account the Flight Form's design is the mounting of Kyrios' main thrusters, a pair of GN Verniers, on the outer side of each leg. Such a layout is rare for Gundams, where the main thrusters are often located on the back and waist, and ensures the verniers face backward to generate high thrust during Kyrios' Flight Form. The GN Verniers create thrust by releasing GN Particles, and have a mechanism whereby their cores are revealed when being activated and when increasing their output. While all Gundams can fly due to the use of GN Particles, only Kyrios can achieve high-speed flight due to its more aerodynamic shape while in Flight Form. Various sensors are built into the Flight Form's nose unit, giving it high detection capabilities. Due to the nose unit and stabilizer being folded onto the back while in MS Form, the conical rear cover of the Kyrios' GN Drive has a flatter end than the other Gundams'.Light purple-colored "GN Cables" in various body locations facilitate the supply of GN Particles to each part of the Kyrios and for attitude control purposes via the particles' mass manipulation ability. These GN Particles are also utilized for beam weaponry, generation of defensive GN Field barrier, and stealth purposes as they can cause electromagnetic interference, leaving conventional communications and radar devices useless. Additionally, by maximizing its particle emission and deploying them in front of itself, Kyrios can conduct atmospheric entry on its own. This is because the emitted particles can shield the Kyrios from the aerodynamic heating caused by the adiabatic compression during the entry process. A pair of torso-mounted clavicle antennas serves as the primary control device for these special particles, and GN Condensers are placed throughout the body to store excess particles, ensuring a reserve that the Kyrios can rely on when its operation consumed more particles than what the GN Drive can produce instantaneously. All these GN Particles related features are also found on the other Gundams.Compared to other Gundams, Kyrios' armament configuration is simple and consisted of GN Beam Submachine Gun, GN Shield, GN Beam Sabers and GN Vulcans, but its high mobility enabled it to display high combat capabilities. It can also mount optional weapons in the form of GN Hand Missile Units, Tail Unit equipped with various missiles and air-to-surface bombs, and Tail Booster with large GN Verniers and GN Cannons. Its MS Form has a balance of ranged and melee combat capabilities, with destructive power comparable to its fellow Gundams, while its Flight Form excels at high-speed hit-and-run attacks. With the Tail Unit attached, the Flight Form can adapt to a variety of missions, and when fitted with the Tail Booster instead, the Flight Form's mobility and firepower are boosted. Like its fellow Gundams, the Kyrios can activate the "Trans-Am System" during an emergency, boosting its thrust and defensive strength, as well as increase its output to three times that of its normal specifications for a limited time period. The Kyrios also glows red as a side-effect, but this system is a double-edged sword as the machine's performance drops dramatically once it ends.Optional add-on equipment was also developed, namely the Gust equipment that changes Kyrios into the GN-003/af-G02 Gundam Kyrios Gust, which has enhanced mobility, long-range attack capabilities and can operate at up to 600km in the thermosphere. Celestial Being was defeated by the UN Forces in AD 2308 and the HRL acquired the wrecked Kyrios, minus its GN Drive that was ejected prior to capture. A reborn Celestial Being then surfaced in AD 2312 with new Gundams including the transformable GN-007 Arios Gundam, Kyrios' successor with superior specifications. Around the same time, the Earth Sphere Federation's autonomous peacekeeping force, the A-Laws, deployed the new GNX-704T Ahead developed by former HRL engineers; these engineers were selected as the developers partly because the HRL seemingly gained an edge in mobile suit development through the tests they conducted on the Kyrios. Feedback from the data of the captured Kyrios was later utilized by former AEU and Union engineers in the development of the transformable GNX-903VS Brave (Standard Test Type) and its commander variant, which were deployed by the Earth Sphere Federation in AD 2314.

GNT-0000/FS 00 Qan[T] Full Saber (aka 00 Qan[T] Full Saber, pronounced "Double-Oh Quanta Full Saber") is a variant of the GNT-0000 00 Qan[T]​ that appeared in Mobile Suit Gundam 00V: Battlefield Record. The 00 Qan[T] Full Saber is the 00 Qan[T] equipped with the GN Sword IV Full Saber equipment, which is supposed to function like the GNR-010 0 Raiser, to adjust the synchronization of GNT-0000 00 Qan[T]​'s twin drive system. However, since tests showed that the Qan[T]'s GN drives can be be fully synchronized without the need of adjustments, the GN Sword IV Full Saber became unnecessary and is not equipped on the suit even though it has been manufactured. Unlike the backpack-like structure used in the normal 00 Qan[T]​, a more traditional cone GN Drive chassis is used on the Full Saber. Both the GN Sword IV Full Saber and the GN Shield are physically connected to this alternate backpack in a style more reminiscent of its predecessor 00 Raiser. As a result, the GN Sword IV Full Saber on the right side can help to balance out the GN Shield on the left and thus maintain the suit's balance during combat. The 00 Qan[T] Full Saber setup is also equipped with two new weapons. First is the GN Sword IV, which can transform into 5 different modes for carrying different kinds of attacks. Second is the GN Gunblades, three dagger-like blades attached to the GN Sword IV which can be used in three different forms.

The MG 1/100 Gundam AGE II Magnum is a Master Grade model kit from the "Gundam Build Divers" series. Released in 2019, this kit features: Articulated joints for dynamic posing capabilities. Weapons including: 2 Beam Sabers 2 Hyper DODS Rifles 2 Shiguru Shields Transformation capability between Mobile Suit (MS) mode and Phoenix mode. New shoulder mold for increased strength and hip locking mechanisms for enhanced stability in both modes. Snap-fit assembly with color-coded plastic parts, minimizing the need for painting. Once assembled, the model stands approximately 7 inches (17.78 cm) tall, making it a notable addition to any Gundam collection.

The Astray Red Frame Kai is the upgraded version of the MBF-P02 Gundam Astray Red Frame developed and piloted by Lowe Guele. It first appeared in the photo series Mobile Suit Gundam SEED VS Astray. An upgraded form of MBF-P02 Astray Red Frame developed by Lowe after his first encounter with LN-GAT-X207 Nebula Blitzs, the major change to the suit is the replacement of the Red Frame's backpack with Tactical Arms IIL and its mount. Besides the two head-mounted "Igelstellung" 75mm multi-barrel CIWS, Tactical Arms IIL and "Gerbera Straight" katana, Red Frame Kai is also equipped with "Tiger Pierce" Katana. It no longer uses the physical shield and the beam torch component of Tactical Arms IIL replaces the Type 71 beam rifle.Like MBF-P03R Gundam Astray Blue Frame 2nd Revise's Tactical Arms II, Tactical Arms IIL can also transform into multiple forms, with each form granting Red Frame Kai unique abilities. Compared to Blue Frame 2nd R's Tactical Arms II, Tactical Arms IIL only retains the Sword form and a slightly altered Flight form. The other 4 forms, Arrow form, Work form, V form, and Delta form are new.Other than these different forms, Tactical Arms IIL can also function as a "Maga no Ikutachi" Energy Absorption Claw and as a DRAGOON. The beam torch component can be detached and used as a welding tool or a beam rifle by adjusting its output. Tactical Arms IIL is a product of all Lowe's knowledge however its multiple forms and functions also increase the chance of it malfunctioning and make its maintenance difficult.

The MBF-02VV Gundam Astray Turn Red is a Mobile Suit appearing in the Mobile Suit Gundam SEED Destiny Astray R photonovel. The Gundam Astray Turn Red is a mobile suit created by Valerio Valeri for his own use. However, since the suit is fully controlled by the combat AI called "80", he does not need to do any actual piloting, although he still sits in the cockpit. The suit has a custom head unit and backpack. Its main body is constructed using MBF-P0X Gundam Astray Noir's spare parts and its body color is basically a reverse of MBF-P02 Gundam Astray Red Frame's (hence the suit's name).The Turn Red is usually armed with a pair of head-mounted CIWS and a pair of Tactical Arms on its back, but it can also be equipped with the same type of beam rifle, beam sabers and shield as the Red Frame. It also carries additional power packs for the Tactical Arms like MBF-P03secondL Gundam Astray Blue Frame Second L. The mobile suit is supposed to be used alongside CAT1-VGR Hyperion GR and CAT1-VGL Hyperion GL, both are commandeered by the Turn Red itself and serve as its protectors during battle. The Turn Red is installed with the Trio System to improve its cooperation with the other two AI-controlled suits.