Products

The MSA-0011[Ext] Ex-S Gundam (aka Extraordinary-Superior Gundam) is an upgraded version of the MSA-0011 S Gundam that appears in Gundam Sentinel. It is piloted by Ryou Roots. By adding several new armor, weapons, and engine modules the engineers of Task Force Alpha's Pegasus III were able to upgrade the MSA-0011 S Gundam into the Ex-S Gundam. The Ex-S Gundam still had three cockpits, but Ryou Roots was the only person who piloted the mobile suit, and due to Ryou's poor piloting skills, it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.With ALICE functioning as the co-pilot of the Ex-S Gundam, "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could take full control of the Ex-S Gundam and its various components and weapons at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryou were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and was more than capable of compensating for Ryou's lack of skill.For defensive purposes, the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block, protecting it from ranged beam attacks. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more verniers, additional propellant tanks, and thrusters.Two new large thruster units were mounted on the Ex-S Gundam's back, giving it incredible thrust and speed. Two large caliber beam cannons were mounted on both thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.The Ex-S Gundam also had remote weaponry in the form of an INCOM, a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. The Ex-S Gundam also featured two reflector INCOMs, stored in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs do not fire beams but instead reflect beam fired from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.Like its predecessor, the Ex-S Gundam was also capable of transforming into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam changes into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and used for travelling over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in combat situations, the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser reaches the battlefield and transforms into the Ex-S Gundam.

The MSA-003 Nemo is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. Its design was later updated for the light novel/OVA series Mobile Suit Gundam Unicorn. Based on the Earth Federation Forces's RMS-179 GM II, the MSA-003 Nemo is a mass-production general-purpose mobile suit developed by Anaheim Electronics for the AEUG. As Anaheim Electronics had bought over Zeonic Corps that worked for the Principality of Zeon, its mobile suit technology has Zeon influences and as a result, the Nemo has a mixture of both Zeonic and Federation technologies.Like most other mobile suits created during the Gryps War, the Nemo has an internal movable frame. Its movable frame is of a new design and reflects the data gained by Anaheim Electronics from the development of the RMS-099 Rick Dias and the MSN-00100 Hyaku Shiki. Thanks to this movable frame, the Nemo has high versatility and can operate in various environments such as zero-gravity, tropical regions, and cold climates. In addition, its legs' movable frame enables high mobility regardless of the environment, and as a result of considering Earth descent operations, it has a highly flexible structure with excellent drop and impact resistance. The Nemo's thrusters layout is designed using the RGM-79SP GM Sniper II's as a reference and this is due to part of the Nemo's development staff having worked on the latter during the One Year War.Compared to the GM II's titanium alloy ceramic composite, the Nemo has a more durable Gundarium alloy armor. As this armor is produced using the same technology as the RMS-108 Marasai's (another Anaheim Electronics' mobile suit, but provided to the Titans), it has high cost-effectiveness. Most of the Nemo's armaments are the same as those used by existing MS, and it could also use other armaments made by the Federation or Zeon. The Nemo was also relatively easy to pilot even for less skilled recruits, and overall, it was an excellent machine with performance superior to the GM II and RMS-106 Hizack.

The MSM-04 Acguy (アッガイ Aggai?) is an amphibious mobile suit introduced in the anime Mobile Suit Gundam. Following the Zimmad Company's MSM-03 Gogg, the Zeonic Company produced their own amphibious mobile suit for the Principality of Zeon, the MSM-04 Acguy. The Acguy used many of the same parts and components as the MS-06F Zaku II, including two of the Minovsky Ultracompact Fusion Reactors used by the latter. Even with the twin reactors, the Acguy left only a trace heat signature, making it effective for stealth and infiltration operations. It is also one of the tallest amphibious mobile suit used by the Zeon during the war. About 60 units were produced according to some sources.The Acguy's weapons consisted of four 105mm vulcan guns mounted in its unusually large head. In its right forearm was a mega particle gun, but in some units, this was replaced by a vulcan gun. The right forearm also had extendable claws known as Iron Nail (along with an extendable arm to increase striking distance) for striking the Earth Federation's mobile suits and property. In the left forearm was a six-tube missile launcher. Some models also had missile launchers in the right forearm, replacing the mega particle cannon and claws.

The MSM-07 Z'Gok (ズゴック Zugokku?) is a mass-production amphibious mobile suit introduced in the anime Mobile Suit Gundam. The MSM-07 Z'Gok is one of the heavy mobile suit developed by MIP. Like the MSM-04 Acguy, it is viewed as a second-stage amphibious MS, different from the MSM-03 Gogg, a first-stage unit. The Z'Gok's final design was improved based on actual combat data from the Gogg, but this delayed its development and the Acguy was completed before it.Among amphibious mobile suit, the Z'Gok's focus is on ground combat. Besides using both air and water-cooled radiators, it also has chemical fuel rockets for jumping in addition to thermonuclear water jets. The Z'Gok is also designed so that it can perform anti-air combat as well as search operations on and above the water surface, duties that the Gogg could not.The Z'Gok's specifications are superior to those of the mass production mobile suits by the Earth Federation Forces at the same period. However, in return for high performance, it is difficult to pilot. Furthermore, it is a costly machine because it lacks parts compatibility with the Gogg.

The MSM-07S Z'Gok Commander Type is a variant of the MSM-07 Z'Gok created by the Principality of Zeon during the One Year War. An improved, higher performance model of the Z'Gok, it has higher reactor output, better maneuverability and a change in armor materials. It eventually became the standard Z'Gok model.

The MSN-001A1 Delta Plus (aka δ Plus) is a variant of the MSN-001 Delta Gundam which appears in the novel and OVA Mobile Suit Gundam Unicorn. It is piloted by Riddhe Marcenas. The Delta Plus is a prototype transformable mobile suit developed in U.C. 0090, which can serve as an all-purpose attack unit. It is based on the MSN-001 δ Gundam, a transformable mobile suit designed during the Gryps Conflict that, because of problems with insufficient frame strength, was completed as the non-transforming MSN-00100 Hyaku Shiki. While Anaheim Electronics was trying various approaches to develop a production model of the transformable Zeta series, it also simultaneously conducted a reinvestigation of the shelved Delta plan, creating the Delta Plus as a result. The Delta Plus' main feature is its capability to reenter the atmosphere unassisted thanks to its ability to transform into a waverider mode. It is also capable of atmospheric flight under the influence of 1G because of its high thrust output and is also equipped with a Bio-sensor. Due to the Delta Plus being a non-standard prototype, only a limited number of these units were produced.

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit that would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics. With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters it is much faster and more maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms, and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycho frame cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

The MSN-06S Sinanju Stein (aka Sinanju Stein) is a mobile suit featured in the PlayStation 3 video game Mobile Suit Gundam UC and UC-MSV. Built from the data of both the MSN-04 Sazabi and RX-93 ν Gundam, the Sinanju Stein was developed as part of the Earth Federation Forces reorganization plan known as the "UC Project". Stein means "stone" in German and Norwegian, and the Sinanju Stein's name was a reference to it being "a jewel in the rough". This mobile suit was created by Anaheim Electronics to test the sensitivity and durability of the lightweight and rigid material, the Psycho-Frame, for use in a mobile suit's internal movable frame. The Sinanju Stein was also equipped with a Psycommu system, and the "Intention Automatic System", which functions by using the Psycho-Frame's sensitivity to the pilot's thought-waves to directly affect behavior of the mobile suit.The suit boasts high mobility and features flexible thrusters on its legs and backpack, allowing it to achieve precise movements at high speeds. Due to its murderous acceleration, it was impossible for ordinary pilot to control the Sinanju Stein, and its evaluation tests were conducted on autopilot to test the limits of the Psycho Frame. Therefore, the Sinanju Stein can be said to be a defective machine for humans to pilot, but in reality, it was designed to be flown by Newtypes, as Anaheim Electronics was planning to hand it over to the Neo Zeon remnant group, the the Sleeves, in a backroom deal, in the form of a transfer disguised as a robbery.Two lines of mobile suits were later developed using the Sinanju Stein as a base. These were the RX-0 Unicorn Gundam and the MSN-06S Sinanju. The Unicorn Gundam was thought to be developed by based on the data of the Sinanju Stein's test. The Sinanju was refurbished using one of two units stolen the Sleeves, and had its response levels tuned down as its controls were too sensitive. Due to how famous the Sinanju later became, the Sinanju Stein was also referred to as "The stone from which Full Frontal's Sinanju was hewn". The other stolen unit was also embellished with the engravings of the Sleeves and deployed in battle over RX-0 Unicorn Gundam 03 Phenex. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The MSN-06S-2 Sinanju Stein is a mobile suit from Mobile Suit Gundam Narrative and is piloted by Zoltan Akkanen. The MSN-06S Sinanju Stein was developed to test the durability and follow-up capabilities of the Psycho-Frame. Two units of the Mobile Suit, referred to using the development code "Stein 01", were later stolen by the Neo Zeon remnants, the Sleeves. One unit was remodeled as the MSN-06S Sinanju and used as the flagship MS of the organization. In UC 0097, the other unit was seen in the fight over the RX-0 Unicorn Gundam 03 Phenex and was embellished with the engravings that became root for the name of The Sleeves.

The MSZ-006 Zeta Gundam was the titular mobile suit of the anime Mobile Suit Zeta Gundam. It was also featured in the sequel series Mobile Suit Gundam ZZ. Developed as part of Project Zeta, a third generation mobile suit development plan launched by Anaheim Electronics upon request from the AEUG, the Zeta Gundam was a revolutionary Transformable Mobile Suit (TMS). While Anaheim's previous attempt at creating a TMS, the MSN-001 Delta Gundam, failed due to issues with its transformable movable frame, the Zeta Gundam solved this problem by studying the design concept of the RX-178 Gundam Mk-II's movable frame, which had an excellent basic design. In addition, it adopted Gundarium γ alloy armor, previously used on Anaheim's RMS-099 Rick Dias.The Zeta Gundam was capable of transforming into a cruising mode known as "Wave Rider Mode". In this form, the Zeta Gundam adopted a wedge shape, concentrating the shockwave generated by supersonic flight underneath it and riding the resulting wave, hence its name. In this form, it was capable of entering the atmosphere without any optional equipment thanks to the Flying Armor mounted on the movable frame on its back, which protected it from shockwave and heat during atmospheric entry. The Flying Armor was based on data from the support vehicle of the same name, and could be replaced with other equipment, such as the Wing Binders for the Wave Shooter specification. The Wave Rider Mode could also function as a sub-flight system for other mobile suit.Due to the Zeta Gundam's complex transformation mechanism, it was impossible to mount generators in its upper body. Instead, it was equipped with a generator in each shin, a design concept inspired by the RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern. Its legs were also installed with thermonuclear jet/rocket hybrid engines, which were capable of functioning both in space and in the atmosphere, allowing the Zeta Gundam to engage in aerial combat immediately after atmospheric entry.The Zeta Gundam's weapons were highly systematic and presented almost no hindrance when carried. It was armed with a pair of head-mounted vulcan guns, a pair of beam sabers stored in the side skirt armor that served as beam guns in Wave Rider Mode, a pair of forearm-mounted grenade launchers, an E-pac powered beam rifle, a shield attached to the left forearm that served as the Wave Rider Mode's nose unit, and the Hyper Mega Launcher, a powerful beam weapon developed from the MSN-00100 Hyaku Shiki's Mega Bazooka Launcher. Thanks to these weapons, it was capable of handling nearly all battlefield situations.Finally, the Zeta Gundam was equipped with the Bio-Sensor, a Quasi-Psycommu device that assisted with the mobile suit's controls using the pilot's brainwaves, improving its responsiveness. Though details about this device was unclear, there were instances of it allowing the Zeta Gundam to demonstrate abilities beyond its specifications during combat. Overall, the Zeta Gundam had exceptionally high operability and was regarded as a masterpiece of the Gryps Conflict era.

The MSZ-010 ΖΖ Gundam (aka ΖΖ Gundam, ZZ; pronounced "Double Zeta") is the titular mobile suit of the anime Mobile Suit Gundam ZZ and is piloted by Judau Ashta. A direct development of the MSZ-006 Zeta Gundam, the ΖΖ Gundam, which had been completed through a prototype, was given the development code "θ" (thus also known as the "θ Gundam") as it was the sixth "Anaheim Gundam" after the RMS-099 Rick Dias (also known as “γ Gundam”). The development plan of the ΖΖ Gundam existed two years before the completion of the Zeta Gundam but was shelved due to internal competition and production delays. However, the performance advantage of the Zeta Gundam against new Titans mobile suits did not last long, and so development of the ΖΖ Gundam was resumed.The ΖΖ Gundam sought to reproduce the operating functions of the RX-78-2 Gundam and the G-Armor in a single machine. An advanced form of the RX-78-2 Gundam's Core Block System was also introduced. As a result, the ΖΖ Gundam can transform into a mobile armor form called the G-Fortress, which acts as a heavy combat bomber and for cruising in space and on earth. The ΖΖ Gundam can also separate into two independent fighter units, called the Core Top and Core Base. The Core Base, consisting of the ΖΖ's lower body and backpack, is operated through the FXA-07GB Neo Core Fighter attached to its front. The Core Top, consisting of the ΖΖ's upper body and double beam rifle, is operated through the cockpit in its nose unit or more frequently through the Neo Core Fighter, which is in its Core Block form, attached to the lower rear.The team on board the "Argama" typically operates the ΖΖ Gundam with a third Neo Core Fighter piloted by the Gundam's main pilot, Judau Ashta. When combining into the ΖΖ Gundam, forming the G-Fortress mode is the first step and consists of the Core Top and Core Base ejecting their Neo Core Fighters to dock with Judau's Neo Core Fighter in Core Block form. When transforming from the G-Fortress mode to MS mode, the large verniers in the arms and legs are retracted. However, this does not reduce total thrust as the surplus output is supplied to the attitude control thrusters distributed throughout the body and the number of operable thrusters are actually increased. Other parts that move during transformation include the flexible wing binders that also serve as arm-mounted wings shields, the shoulder thruster binders, the large backpack, etc.The engine installed in the backpack is originally meant for ships and could supply power for an entire ship. It also functions as the main thruster unit of the ΖΖ Gundam when in MS form, generating thrust equivalent to that of a large ship. The ΖΖ Gundam's armor is a multi-spaced structure composed of Gundarium γ alloy, capable of withstanding a mobile suit explosion at close range and resisting high water pressure. While it is impossible to completely defend against a direct hit of a mega particle beam, the wings shields are strong enough to prevent a direct hit on the cockpit.With its overall height limited to around 20 meters as requested by AEUG to maintain mobility, the ΖΖ Gundam's design also incorporated the movable frame and magnet coating technology. The generator output which had caused problems during early stages of ΖΖ's development was resolved by incorporating three compact, high-output generators. The movable modules and armor parts, which have a multi-layered structure, are connected by hinges and slide rails which have magnet coating, making them flexible and robust while allowing instantaneous transformation of the ΖΖ Gundam. However, the complexity of the system resulted in poor maintainability and productivity also deteriorated.The control system of the ΖΖ Gundam is equipped with a Bio-Sensor, which is a simplified Psycommu system, as an interface for Newtype pilots. An improved version of the Biosensor installed in the Zeta Gundam, it improves the responsiveness of the mobile suit by supporting the control system with the pilot's brainwaves. However, as a protective measure, the Biosensor is inactive when a pilot with low Newtype abilities boards the ΖΖ Gundam. The unit is mounted in the ΖΖ Gundam's Core Block and the synchronization of the device is improved by inputting the brainwave patterns of the Neo Core Fighter's pilot.The ΖΖ Gundam has a number of powerful weaponry, including two hyper beam sabers which are also usable as beam cannons, a double beam rifle, a 21-tube missile launcher installed on the backpack, and a high mega cannon on the forehead. While the ΖΖ has a very destructive arsenal, its weapons systems require a high level of energy. As a result, the ΖΖ often found itself almost completely drained of power after using its high mega cannon. The ΖΖ Gundam's structural issues due to its complicated construction and transformation systems were eventually corrected with the MSZ-010S Enhanced ZZ Gundam and its massive final upgrade FA-010S Full Armor ZZ Gundam.

The MG 1/100 Musha Gundam MK-II is a stunning Master Grade model kit that reimagines the legendary Gundam MK-II with intricate samurai-inspired details. Designed for enthusiasts of both Gundam and traditional Japanese warrior aesthetics, this kit delivers an exceptional blend of style, precision, and craftsmanship. Key Features: Scale and Material: 1/100 scale model kit made from high-quality polystyrene, ABS plastic, and PVC for durability and precision. Samurai-Inspired Design: Features ornate gold-plated armor, kabuto-style headgear, and a bold black-and-gold color scheme with crimson accents. Dynamic Weaponry: Equipped with dual katanas, a naginata, and a musket-style rifle, providing versatile display options. Articulation and Poseability: Built on a robust Master Grade frame, offering exceptional articulation for dynamic action poses. Customization: Includes detailed stickers and decals for added personalization. Release Information: This model kit was released in 2009 as part of Bandai’s celebrated Master Grade line. It combines elements of the traditional Musha Gundam with enhanced details, making it a standout piece for collectors. The MG Musha Gundam MK-II is an ideal choice for modelers looking for a unique and highly detailed build. With its rich samurai heritage and Gundam legacy, it is both a rewarding project and an impressive display centerpiece.

The MVF-X08 Eclipse Gundam (MVF-X08 エクリプスガンダム?) is a custom-made Mobile Suit from the Mobile Suit Gundam SEED Eclipse manga. It was piloted by Tatsumi Hori for the Orb Disaster Relief Team.A custom Mobile Suit developed in secret by Orb. Its most prominent feature was its ability to transform from a flight form to an MS form. It was equipped with a Mirage Colloid function, and was armed with functions specialized for the ODR, an organization that excelled in covert operations. Two units have been confirmed to exist.The MVF-X01 Eclipse was also developed with the aim of giving an MS the functions of a supersonic fighter capable of operating at ultra-high speeds, high altitudes and cruising extremely long-distances. Unlike the MVF-M11C Murasame, which was also a transformable aerial combat MS developed by Orb to defend territorial waters and airspace, the Eclipse had capabilities that allowed it to attack enemy bases. Although these Mobile Suits have similar model numbers, they are machines created with different design philosophies.Eclipse is a special mobile suit that it places burden on a bodily-inexperienced pilot, as revealed in chapter 12 Gundam Seed Eclipse manga, where Tatsumi Hori spilled his blood from his mouth as he couldn't take the attack pressure from both Ginn Gladiator and Aile Calamity Gundam.

The OZ-00MS Tallgeese Flügel is a variation of the OZ-00MS Tallgeese appearing in New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers. The Tallgeese Flugel is a variant of the OZ-00MS Tallgeese created by Mike Howard, who has outfitted it for space use. The original back-mounted thruster units are replaced by four angelic wing binders lined with many thrusters, granting the Tallgeese great speed and manoeuvrability in space. The two larger wings can function as shields when positioned in front of the suit.

The OZ-13MS Gundam Epyon is a mobile suit introduced in Mobile Suit Gundam Wing. Originally piloted by Heero Yuy, it was later given to Zechs Merquise. Based on data from the OZ-00MS Tallgeese and the other Gundams, the Gundam Epyon was created by Treize Khushrenada while he was placed under confinement by the Romefeller Foundation. In keeping with Treize's philosophy, the Epyon eschews cowardly long-range weapons in favor of chivalrous close combat. However, when the suit becomes a part of White Fang, a pair of Vulcan guns are added to the head.[1] Its main weapons are a segmented, whip-like heat rod mounted on a shield and a powerful beam sword whose energy is supplied by a direct connection to the Epyon's generator. Treize also installed a modified version of the Zero System known as Epyon System in the cockpit, making this suit a powerful opponent. The Epyon can also transform into a "mobile armor" mode for high-speed flight and cruising in space. It resembles a mythological dragon in this mode, however, its primary weapons are inaccessible save for the Epyon Claws which are also used as landing gear in this form.Gundam Epyon EW is Hajime Katoki's redesign of Epyon in a similar fashion to other EW version of the first five Gundams and included in New Mobile Report Gundam Wing: Frozen Teardrop as well as Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. It is later given additional equipment known as 'Sturm Und Drang' that can be used for both defense and offense.

The PF-78-3A Gundam Amazing Red Warrior is a Gunpla from the anime series Gundam Build Fighters Try. It is a variant of the PF-78-3 Perfect Gundam III. Built by Meijin Kawaguchi for his own use, the Gundam Amazing Red Warrior is a customized version of the PF-78-3 Perfect Gundam III "Red Warrior" that appears in the manga Plamo-Kyoshiro. This Gunpla is also the Meijin's way of honoring Takeshi Iori, who had used the Perfect Gundam. The Gundam Amazing Red Warrior can exhibit overwhelming speed during battle due to its greatly improved thrust, and has high maneuverability thanks to the flexibly mounted vernier units above the shoulder armors. The weapon mounted on the left side of the backpack can be changed to meet the needs of different battle, and this allows the suit to be highly adaptable. The combination of the Gunpla's high degree of completion and the Meijin's excellent piloting skills caused the Gundam Amazing Red Warrior to be a formidable foe for any opponent.

The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than Luna Titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor. The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

The RGM-79[G] GM Ground Type is a ground based predecessor to the RGM-79 GM. It first appeared in Mobile Suit Gundam: The 08th MS Team. An early prototype of the Earth Federation Forces' mobile suit mass production project, the GM Ground Type was developed before the RX-78-2 Gundam's operational data was recovered. Even though it was only able to operate on Earth, its internal parts were all tuned for ground combat, and it was equipped with Luna Titanium armor, causing its mobility, maneuverability, and general performance to surpass the later RGM-79 GM.It is said that its performance under gravity even rivals that of the RX-78.The GM Ground Type was a simplified version of the RX-79[G] Gundam Ground Type, and produced using the same production line.Compared to the Gundam Ground Type, the GM Ground Type omitted the chest-mounted Vulcan gun and multi-launcher, the weapon container mount on the backpack, and was equipped with a less powerful generator.It also did not incorporate parts from the RX-78 series, though its head unit was similar in specs to that of the RX-78's.Since it was produced after the production format was established, its ease of production, ease of maintenance and availability of parts were all greater than its predecessor.Due to its use of Luna Titanium alloy, it was unsuited for mass production and produced in limited numbers. However, the GM Ground Type was important in establishing the EFF's mobile suit production framework. The operational data it collected contributed to the development of later mobile suits.Finally, the basic structure of its head was later inherited by the RGM-79 GM, becoming the iconic face of Federation mass production mobile suits.

The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras and image stabilizers for precision, long range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long range sniping capabilities. The suit is one of the few capable of accurately firing MS sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat, and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boasts superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's, and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow up models. The GM Sniper II was however used as the basis for the RX-80, a mobile suit that became the base unit for the Project Pale Rider. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.