Products

The GN-0000 00 Gundam (aka 00 Gundam, 00 (pronounced "Double-Oh")) is the titular mobile suit of Mobile Suit Gundam 00. It is the successor of the GN-001 Gundam Exia and is piloted by Setsuna F. Seiei. The GN-0000 00 Gundam was one of the new Gundams developed by Celestial Being after the paramilitary organization was defeated by the UN Forces in AD 2308. It was made specifically for Setsuna F. Seiei, thus it was designed based on his previous mobile suit, the GN-001 Gundam Exia, and reflected Exia’s performance data. Although Setsuna's whereabouts were unknown at the time of the 00's development, his Celestial Being comrades continued developing the mobile suit as they believed he would return. Deployed in AD 2312 following Setsuna's return and as Celestial Being made a comeback after four years of silence, the 00's most prominent feature is the Twin Drive System that utilized two original GN Drives. By synchronizing the two GN Drives, the Twin Drive System causes the resulting GN Particle output to be squared that of a single GN Drive rather than merely doubled. With this immense amount of GN Particles, the 00 was expected to have exceptional combat capabilities. The theory behind the Twin Drive System was developed by the founder of Celestial Being, Aeolia Schenberg, and hidden in the quantum processing system Veda. This theory was eventually sent to Celestial Being at the same time as the Trans-Am System.The 00 was the first mobile suit to incorporate the Twin Drive System. Unfortunately, synchronization of the two GN Drives was extremely difficult, and this made achieving stable operation of the system elusive. Even with the use of GN Drives from the Exia and the GN-000 0 Gundam, a combination which had the highest synchronization rate among the five GN Drives that existed at that point of time, the system failed to reach the stable operational range. In the end, Setsuna used the Trans-Am System briefly to forcibly pushed the Twin Drive System into the stable operational range. This was a dangerous method however, as it could cause the GN Drives to overload and even explode. Although the Twin Drive System was successfully activated, the 00 was still incapable of stabilizing the system by itself, as demonstrated when both of its GN Drives overloaded during the battle with the GNX-704T/AC Ahead Sakigake due to use of the Trans-Am System. These problems were later solved by combining 00 with a dedicated support machine, the GNR-010 0 Raiser, forming the GN-0000+GNR-010 00 Raiser. Through this combination, the 0 Raiser's particle control equipment was able to control and stabilize the 00's Twin Drive System, and the Trans-Am System could also be utilized safely.Located off the shoulders, the pair of GN Drives were mounted separately on two drive bases that were connected to the 00's backpack through a pair of drive arms. The drive bases could rotate to the front and back of the mobile suit, enabling the GN Drives to change freely from their standard side-facing position to other positions. This granted the 00 superior mobility as the GN Drives were covered with a thruster cone that enabled them to function as the mobile suit's main thrusters by emitting GN Particles to generate thrust. Furthermore, when the GN Drives faced the front, the emitted particles could be used to generate a GN Field for defense. The placement of 00's GN Drives was based on the operational data of the GN-XXX Gundam Rasiel, which had high mobility thanks to its shoulder-mounted GN Verniers. Due to the miniaturization of devices such as stabilizers that control the GN Drives' core units, the 00's GN Drives are smaller compared to those of the Exia and the other 3rd generation Gundams. As for the GN Drives' thruster cone, it was based on that of the 3rd generation Gundams' and incorporated functionalities of the three-thrusters type GN Drive cover used by the 2nd generation Gundams, such as the GNY-001 Gundam Astraea. Besides the GN Drives, the 00's backpack could also generate thrust using GN Particles due to a pair of built-in thrusters.The Gundams were equipped with special antennas called "Clavicle Antennas" to control their GN Particles, and 00 was no exception, but it adopted a miniaturized version installed in the forehead as a pair of yellow antennas. Previously, the clavicle antennas were mounted on a Gundam's torso, but their position was changed in the 00 to avoid functional interference with the movements of the mobile suit's GN Drives. Additionally, 00 had an extra pair of chest-mounted antennas to support the functions of the forehead's clavicle antennas. As with the other Gundams, GN Condensers were installed throughout the 00's body to store excess GN Particles generated by its GN Drives, enabling the mobile suit to consume a large amount of particles instantaneously when required. However, the 00 utilized newly designed, high performance GN Condensers as the amount of particles generated by the Twin Drive System is of a different magnitude. Like previous GN Condensers, these new GN Condensers could also display various information and data, such as the amount of particles stored. The GN Particles are transmitted to various parts of a Gundam's body using special GN Cables, and while these cables were exposed in earlier Gundams, they have been internalized in the 00.While the 00 was developed as a general-purpose machine, its armaments emphasized melee combat, like its predecessor, the Exia. Its main armament, a pair of GN Sword IIs, were developed from Exia's GN Sword. The GN Sword II has three different modes: Sword, Beam Saber, and Rifle, allowing the 00 to fight flexibly without switching weapons. The other armaments are a pair of GN Beam Sabers that doubled as GN Beam Daggers, and a pair of GN Shields that could combine into a large shield and are also usable as striking weapons. An enhancement plan called the GN-0000/7S 00 Gundam Seven Sword would equip the 00 with seven blades, and this is an evolved version of the "Seven Swords" used by Exia. Other variants of the 00 are the GN-0000+GNR-010/XN 00 XN Raiser, where the mobile suit combines with an enhanced form of the 0 Raiser, and the GN-0000/XN XN 00 Gundam, where the 0 Raiser's enhancement parts are fitted onto the 00 itself. The 00 was heavily damaged during the final battle with the Innovators and lost both GN Drives. It was eventually repaired, with a pair of improved large GN Condensers mounted in place of the GN Drives. The repaired 00 retained the Twin Drive System and could even use the Trans-Am System for an extremely short period of time.

The XVX-016 Gundam Aerial (ガンダム・エアリアル Gandamu Eariaru?) is a mobile suit introduced in Mobile Suit Gundam the Witch from Mercury. It's piloted by the protagonist of the series, Suletta Mercury. The MS that Suletta Mercury brought to the school. Its basic structure, in which Joints that imitate the human body are driven by EMTs (electric motors), is based on the same existing standards as mobile suits produced by other companies. Although it's a machine that can be handled by ordinary pilots, it displays a performance that sets it apart from the norm when Suletta is boarding it. Its powers are mediated by a new mineral called Permet, being very similar to the characteristics of the forbidden machine GUND-ARM, popularly known as "GUNDAM", which employed "GUND FORMAT", a system for MS that aimed at human augmentation.

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit in the Gundam SEED Astray series of manga, novel and photonovel. It is piloted by Junk Guild member Lowe Guele.

The GN-001 Gundam Exia (aka Exia, Gundam Seven Swords) is a mobile suit featured in season one of Mobile Suit Gundam 00 and is piloted by Setsuna F. Seiei. Specializing in close combat and armed mainly with melee weapons, the Gundam Exia is one of four Gundams deployed in AD 2307 by the paramilitary organization, Celestial Being, to eliminate world conflicts through armed interventions. To fight against the world with their small numbers and win, these Gundams have overwhelming power and equipped with advanced technology a century ahead of its time. Notably, the semi-perpetual GN Drive mounted in the center of the Gundams provide almost limitless energy and generates special, multifunctional GN Particles. The GN Particles grant outstanding mobility, including independent flight capabilities, and are also utilized for beam weaponry, attitude control, and stealth purposes as the discharged particles can cause electromagnetic interference, leaving conventional communication and radar devices useless. The Gundams also share common aspects with conventional mobile suits, such as the use of E-Carbon for its armor material. However, the Gundams' E-Carbon has higher defensive power due to the use of advanced materials.An example of Exia's overwhelming power is that its output was estimated to be about six times that of the SVMS-01 Union Flag, one of the newest conventional mobile suits at the time. The technical hurdles that had to be overcome to create the powerful Gundams and their GN Drives were high, making their production extremely difficult and caused the Gundams' development to occur in phases. The first generation machine, the GN-000 0 Gundam, established the basic system of a mobile suit powered by a GN Drive, and armed with a beam gun and beam saber. Subsequently, four second generation machines were developed with individual capabilities required for armed intervention, and their data served as a basis for the third generation machines, which included Exia and the other three Gundams deployed in the armed interventions. Specifically, Exia was developed from the GNY-001 Gundam Astraea, a general-purpose mobile suit with human-like movability that was used for testing various weapons, and the two machines have a number of similarities in terms of appearance.The Astraea's movability aspect is particularly appropriate for the Exia, which requires the same range of articulations as the human body due to its close combat specialization. Thus, while the Exia is armed mainly with melee weapons, its basic performance remains that of a general-purpose mobile suit. In fact, Exia is the only Gundam deployed for the armed intervention that has a body structure capable of range of articulations like the human body's, and the omission of such a structure in the other three Gundams is simply because they do not require it as their specialization is in other areas. To achieve its wide range of articulations, Exia has the most complex basic frame out of the four Gundams, its armor is also more minutely segmentalized as well. This armor design however causes some internal structures and the joints to be unprotected during certain poses, lowering Exia's defensive capability. On the other hand, this design does provides better mobility, giving Exia the best projectile evasion capability among the four Gundams.The Exia also has finer attitude control capabilities than the other Gundams, which is beneficial for close combat, and this is related to its GN Cables. The GN Cables, also known as “GN Power Lines”, are the light purple-colored cables running through various parts of the Exia's body and also one of its eye-catching visual features. While these cables are also found on other Gundams, the ones extending from the shoulders to the upper arms are unique to Exia. The cables facilitate the supply of tremendous amount of GN Particles, and thus energy, to each part of the Gundam instantaneously. They are also used for attitude control due to the GN Particles' mass reduction effect, and so, the Exia which has more cables on its exterior than the other Gundams is able to achieve finer control. In terms of defense however, such placements are dangerous, and later in GN-001REII Gundam Exia Repair II, the cables become mostly stowed in the armor.The GN Particles' mass reduction effect also lightens the Gundam, and can be used to alter the mass ratio of various body parts. Due to this latter ability, it is possible to freely control the machine's inertia and turning capabilities when in the air, and for Active Mass Balance Auto-Control (AMBAC) when in space. This also eliminates the need for the legs to "walk” when moving. As for the control of GN Particles, it is largely carried out by the two clavicle antennas on the Gundam's torso. A minor role is played by the third generation Gundams' head antenna, which is experimentally equipped with particle control functions. The head antenna also has communications and radar search functions, as well as the black box for quantum communication linkage with Veda (the Celestial Being's quantum computing system). The rest of the Gundams' humanoid head unit also contain systems responsible for controlling the entire body, much like a human's head. On a side note, the Exia's head is designed to look like the helmet of the pilot suit worn by the Gundam Meisters in AD 2307-2308 to express the belief of “Meister = Gundam”.While the GN Drive can produce GN Particles endlessly, even when the Gundams are inactive, there is a limit to the amount that could be instantaneously produced. Thus, continuous or heavy usage of beam weapons and other GN Particles consuming systems might cause the Gundams to run out of particles. To avoid this, the Gundams have GN Condensers in various body parts to store excess GN Particles. For maintenance purposes, the condensers can display the particles' compression rate and the amount stored. During mission, this display function is used for transmitting coded messages to allied units. On the matter of GN Drives, Celestial Being only created five units as that was deemed to be the minimum needed for armed interventions. The low number is not only due to difficulties in manufacturing the GN Drive, which requires Jupiter's high gravity environment, but also because having more GN Drives would increase the risk of them falling into the enemy's hands.The Gundam Exia is nicknamed “Gundam Seven Swords” as its development code was “Seven Swords”, and as indicated by this name, it is equipped with a total of seven blades to meet the needs of the moment during combat. Of these seven, the GN Sword, GN Long Blade, GN Short Blade are physical blades, while the rest are beam-based and consisted of two GN Beam Sabers and two GN Beam Daggers. The GN Sword serves as the primary weapon and due to its low energy consumption, the Exia has an advantage in prolonged combat, which mainly occurs when fighting ace pilots or when subjected to traps such as the three major bloc's joint military exercise. The three physical blades also serve as countermeasures against GN Field, a protective barrier made of GN Particles. In other words, Exia is also intended to fight against Gundam/GN Drive-equipped machine that is piloted by a betrayer or captured by the enemy and used against Celestial Being. Early on, an alternate configuration of the GN-005 Gundam Virtue also had an anti-betrayer role, but its design was dropped and this increased the responsibilities placed on Exia and its Gundam Meister.Other armaments include a GN Shield for defense that also provides protection to the internal structures and joints that might be exposed during movements. The GN Shield is usually in a compact size to maintain Exia's range of articulations, but can expand to increase the defensive area when needed. Similarly, the GN Sword, can fold its blade and has a Rifle Mode for ranged combat. The last of Exia's armament is another ranged weapon in the form of a pair of low-power GN Vulcans mounted in the forearms. During battles, the Exia gloriously sliced through its opponents in close combat, leaving a powerful impression on those who witnessed it and contributing greatly to the instillment of a "fear of Gundams" in the world. This was already anticipated by Celestial Being, and it is because of this that the organization's tactical forecaster, Sumeragi Lee Noriega, selected the Exia to intervene in the AEU-09 AEU Enact's presentation ceremony, which became the unveiling of the paramilitary organization.The Gundam Exia has an "Over Boost Mode" that temporarily boosts its GN Drive's performance and thus increase the mobile suit's capabilities. During an emergency, the Exia can activate a special "Trans-Am System" that enhances its thrust and defensive capabilities, as well as increase its output to three times that of its normal specifications for a limited period of time. This system also causes the Gundam to glow red, but it is a double-edged sword as Exia's performance will drop dramatically once it ends. A number of additional optional equipment was also developed for Exia, such as the high mobility Avalanche Unit and the GNR-001E GN Arms Type-E support machine. When equipped with the Avalanche Unit, the Exia becomes the GN-001/hs-A01 Gundam Avalanche Exia and can speed past specialized high-speed mobile suits, which it normally cannot do despite having remarkable mobility. When docked with the GN Arms Type-E, the Exia becomes the GN-001+GNR-001E GN Armor Type-E, obtaining better mobility, offensive and defensive capabilities.

Celebrate the 40th Anniversary of Gundam and the 45th Anniversary of Hello Kitty!This two pack features the SD-EX Standard RX-78-2 Gundam and equal sized Hello Kitty who can also sit!Includes apple shaped stand for Kitty and apple she can hold in her paw.Only product with affixed official Bluefin and Bandai Namco label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance

The MSN-04 Sazabi is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack. It is piloted by Char Aznable. After Char Aznable returned as the leader of his own Neo Zeon faction in U.C. 0093, he ordered his engineers to create a new mobile suit which would fit his piloting skills and Newtype powers. The result was the MSN-04 Sazabi, which was later built by the Luna-based contractor Anaheim Electronics [1][2]. With an overall height of 25.6 meters, the Sazabi is much bigger than most standard mobile suits, but thanks to the use of lightweight armor materials and a great number of thrusters [3] it is much faster and maneuverable than other suits. The suit is armed with an abdomen-mounted scattering mega particle cannon, a beam shot rifle, a pair of beam sabers stored in the arms and a shield with three missiles as well as a beam tomahawk.Because Char is a Newtype, the Sazabi was also equipped with six funnels which the pilot could control through his psycowaves via a Psycommu system. The Sazabi was also the first MS to be equipped with the revolutionary new psycoframe cockpit. This system featured microscopic psycommu receiver circuits installed throughout a mobile suit's internal frame and cockpit walls. These tiny circuits amplify and transmit a Newtype pilot's psycowaves, enabling the mobile suit to respond instantaneously to mental commands.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray.

The RX-93 ν Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was designed and piloted by Amuro Ray. The ν Gundam is one of the most advanced mobile suits during the Second Neo Zeon War in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, it is used by Amuro Ray who also came up with its basic design. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average specification values of each successive generations of Gundam-type units from the original RX-78-2 Gundam to the MSZ-010 ΖΖ Gundam, and updated with state-of-the-art technologies introduced at the time. Various test data collected from the ARX-014P Silver Bullet (Funnel Test Type), the YRA-90A μ Gundam and the RX-9 Narrative Gundam were also used in its development.The ν Gundam's design focuses on versatility and operational aspects, as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycho-Frame, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.Incorporating the Psycho-Frame technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ν Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a Newtype pilot. It is also the first Gundam-type machine to be equipped with Funnels, and a newly developed MS control program is installed to account for the ν Gundam's center of mass during the separation and movement of the Funnels. Despite its short development time, the ν Gundam proved itself to be a formidable mobile suit and when combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art machine was able to almost single-handedly hold back the whole Neo Zeon force, and its Psycho-Frame was put to the test to determine the history of humanity living on earth.

The MSN-06S Sinanju (aka Sinanju) is a mobile suit featured in the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. A modified version of the MSN-06S Sinanju Stein, it was piloted by Full Frontal. Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from Psycho-Frame materials. This mobile suit was then stolen and modified into the MSN-06S Sinanju by the Neo Zeon remnant group known as "The Sleeves", and became the personal machine of the group's leader, Full Frontal.All of the Gundam-like features (except for the head-mounted vulcan guns) in the Sinanju Stein have been replaced with a Zeonic design and weaponry. Painted in crimson and with gold engraving, the Sinanju looks like the emblem of the Neo Zeon forces embodied. This decoration not only strengthens the armor, but is also said to be a design that is meant to control the organization known as the Neo Zeon remnants. The Sinanju Stein was an experimental machine, so there were some concerns about the armor's resistance to elasticity, but in order to increase the pilot's survival, the beam coating was strengthened from the two-layer structure used in most conventional MS to a five-layer structure, and the entire cockpit block was covered with Luna Titanium X material, and the Sinanju's armor has been strengthened as flagship machine.The Sinanju is also equipped with thrust deflector thrusters shaped like the large wings of a bird of prey, and flexible thrusters on the left and right sides of both legs and shins. Together with the numerous thrusters located all over its body, it is capable of acrobatic maneuvering combat that is impossible for a normal MS to achieve. With its overwhelming combat ability, crimson body, and mono-eye sensor, the Sinanju reminds all who see it of the legendary "Red Comet".

The STTS-909 Rising Freedom Gundam is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. Using all previous operational data from the ZGMF-X20A Strike Freedom Gundam, the unit was designed incorporating transformation technology acquired by Orb through the MVF-M11C Murasame. Also, its weapons are developed and manufactured from PLANT, and latest technologies from various countries and organizations are used to develop this unit. It shares a frame with the STTS-808 Immortal Justice Gundam, as well as containing the same panoramic monitor cockpit and OS. This state-of-the-art mobile suit is also remarkable in that it is even more compact in size than previous Freedom units. Its equipment mainly consists of long-distance combat armament, with Variable Phase Shift Armor (VPS Armor) that can neutralize physical ammunition. With its common frame as a base, equipment may be changed depending on usage needs, making this a multi-role unit capable of utilizing numerous variations.Unlike its predecessors, the Rising Freedom Gundam is battery-powered, necessitating the use of various measures to conserve power for its energy-intensive loadout.

The TBG-011B Try Burning Gundam is a Gunpla introduced in the anime Gundam Build Fighters Try. Piloted by Sekai Kamiki, it is an upgrade of the BG-011B Build Burning Gundam. Compared to its predecessor, the BG-011B Build Burning Gundam, the Try Burning has reinforced joint armor and is installed with a new system known as the "Burning Burst System" to maximize its Plavsky Particle emission. Similar to the Build Burning, the Try Burning's transparent blue parts are for storing Plavsky Particles for later emission, and more of them are hidden below the armor. Although the suit has no shield, it can defend against projectile and ranged beam attacks using its elbow armor like its predecessor. The suit can also release Plavsky Particles from it soles in an attempt to protect itself from attacks below. Normally, these Plavsky Particles are used for propulsion, much like those released from the Gunpla's back. When Sekai assimilates with Try Burning, its performance improves by more than 3 times and the transparent blue parts turn orange from the change in the Plavsky Particles' color. Furthermore, all the Plavsky Particles stored in the suit can be released at once, and this causes the entire Try Burning to be engulfed in flames. The suit also gains the ability to generate a barrier during assimilation. The weakness of assimilation is that the damages sustained by the Gunpla are reflected onto Sekai. Before the finals of the U-19 Championship, the Try Burning was remodeled so that its polycaps are interchangeable with that of its teammates. This allows the damaged Try Burning to be repaired using its teammates parts, allowing it to fight properly during the overtime battle as the team's representative.

The RX-0 Unicorn Gundam 02 Banshee (aka Banshee) is a mobile suit that appears in Mobile Suit Gundam Unicorn. It is built alongside its brother unit, the RX-0 Unicorn Gundam, under the Earth Federation's UC Project. Originally piloted by Marida Cruz, it was later assigned to Riddhe Marcenas.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ Uingu Gandamu Zero?) (aka Wing Zero, Wing 0, or just Zero) is a mobile suit that appears in Mobile Suit Gundam Wing. Wing Zero was the first Gundam designed by the five engineers who had developed the OZ-00MS Tallgeese. Around A.C. 175, the MS, which was developed as a "weapon" by OZ, began to evolve as an epoch-making mobile weapon based on the Tallgeese (Prototype Leo). Meanwhile, several engineers that were at the core of the Tallgeese development ran away from OZ to develop even higher performance MS. Five of them gathered to develop a MS that would adopt "technology and materials that did not yet exist at that point in time", including "Gundanium", which was a cutting-edge material at that time. Having been developed in light of the Tallgeese's failure, it became a dreadful machine equipped with an interface that transcended the limits of the pilot. That is "Wing Zero", and the material adopted gave it the code name "Gundam". By transforming into Neo Bird Mode, high-speed cruising is possible; in addition, the Twin Buster Rifle has the power to destroy a space colony in a single hit.Wing Zero's head unit is an aggregation of various sensors and head Vulcan Guns are not equipped. Its chest unit is equipped with the main generator and a "ZERO System" built-in type cockpit. The ZERO System also turned out to be what the five engineers feared the most as it forced the pilot to achieve the "perfect victory". The five engineers, harboring a fear of the dimension of Wing Zero's excessive destruction coefficient (in practice, the parts with the required specifications could not have been supplied at that point in time), suspended the machine's development and sealed its design data. In hiding, the five engineers who had returned to their respective base colonies would develop five "Gundams" that could be said to be unique Wing Zero-derived machines. And then in A.C. 195, the seal was broken by Quatre Raberba Winner, one of the five Gundam pilots who had carried out Operation Meteor; and Wing Zero, which had been impossible to build at the time of its design, is born.

The XXXG-01D2 Gundam Deathscythe Hell (aka Deathscythe Hell, or Gundam Zero-Two) is the upgraded version of XXXG-01D Gundam Deathscythe in Mobile Suit Gundam Wing. It is piloted by Duo Maxwell. An updated version of the XXXG-01D Gundam Deathscythe that was destroyed by OZ, the Deathscythe Hell is better adapted for space combat. Like its predecessor, the Deathscythe Hell specializes in stealth and close combat. The new active cloak mounted on the shoulders improve the suit's defense when closed, and can withstand multiple beam cannon shots from OZ's OZ-02MD Virgo. Furthermore, it also allows the suit to become invisible. When opened, the active cloak enhances the Gundam's mobility. One of Duo Maxwell's favorite strategies is to use the Gundam's enhanced hyper jammers and its invisibility to sneak close to enemy units and catch them unawares. This tactic is usually good for taking out at least one or two enemy units, after which Duo will uncloak the Gundam.Deathscythe Hell's primary weapon is a Twin Beam Scythe, an upgraded version of its predecessor's Beam Scythe, and it is equipped with a second beam scythe blade and a small rocket engine on the end, giving it a greater reach and power. The Deathscythe Hell's secondary weapon is a Buster Shield on the left forearm which can be deployed as a projectile weapon. Like the original Deathscythe's, this buster shield can also emit a beam blade. Lastly, the Deathscythe Hell retained the Deathscythe's head-mounted vulcan guns, but the clavicle-mounted machine guns were removed.

The ZGMF-X20A Strike Freedom Gundam (aka Strike Freedom, Freedom) is the successor of the ZGMF-X10A Freedom Gundam introduced in the anime Mobile Suit Gundam SEED Destiny. It is piloted by Kira Yamato.

The ZGMF-X42S Destiny Gundam is the titular mobile suit of Mobile Suit Gundam SEED Destiny and was piloted by Shinn Asuka.

The LEGEND BB #373 Musha Gundam is a Super Deformed (SD) model kit that brings a unique samurai-inspired aesthetic to the Gundam universe. This kit offers a delightful building experience, combining traditional Gundam design elements with feudal Japanese warrior motifs. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for expressive poses that showcase its samurai armor and weaponry. Weaponry and Accessories: Equipped with a naginata, katana (Bukyuumaru), and a Tanegashima rifle, providing a comprehensive arsenal for dynamic display options. Design Details: Incorporates samurai armor elements, including a kabuto-style helmet and traditional weaponry, blending Gundam mechanics with historical Japanese warrior aesthetics. Release Information: Released in July 2012 as part of Bandai's LEGEND BB series, this kit revitalizes classic SD Gundam designs with modern engineering and enhanced detail. The LEGEND BB #373 Musha Gundam is an excellent addition for collectors and builders who appreciate the fusion of Gundam's futuristic design with traditional samurai elements, offering both a rewarding build and a distinctive display piece.

The LEGEND BB #377 Musha Godmaru is a Super Deformed (SD) model kit that brings a unique samurai-inspired aesthetic to the Gundam universe. This kit offers a delightful building experience, combining traditional Gundam design elements with feudal Japanese warrior motifs. Key Features: Scale and Materials: Non-scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for expressive poses that showcase its samurai armor and weaponry. Weaponry and Accessories: Equipped with a naginata, katana (Bukyuumaru), and a Tanegashima rifle, providing a comprehensive arsenal for dynamic display options. Design Details: Incorporates samurai armor elements, including a kabuto-style helmet and traditional weaponry, blending Gundam mechanics with historical Japanese warrior aesthetics. Release Information: Released in July 2012 as part of Bandai's LEGEND BB series, this kit revitalizes classic SD Gundam designs with modern engineering and enhanced detail. The LEGEND BB #377 Musha Godmaru is an excellent addition for collectors and builders who appreciate the fusion of Gundam's futuristic design with traditional samurai elements, offering both a rewarding build and a distinctive display piece.

A Musha Gundam from a new generation who is clad in Kirahagane boldly joins the battle.Kirahagane is an application of in-mold decoration technology where layers of film are applied during injection molding. Take a close look at the contrast created by the transparent effects achieved with clear parts and the colorful designs of Kirahagane! Kirahagane is used for the sword. The unsheathing stance can be reproduced thanks to the range of articulation in the elbows. Parts that work with SDW HEROES ONMITSU GUNDAM AERIAL (sold separately) are included!

"Gundam Aerial" x " ONMITSU GUNDAM", the famous character of yesteryear x The revival of KirahaganeThe long-awaited new-generation ninja, filled with new and old elements, has arrived!Kirahagane is an application of in-mold decoration technology where layers of film are applied during injection molding.The kit comes with a wide variety of equipment.The Shuriken can be recreated by rearranging the armaments.Internal frames specialized for mobility are built in.The range of articulation of the elbow allows for the two-sworded posture.Parts that work with "SDW HEROES TENKAMUSODAISHOGUN" (sold separately) are included.