Products

Mimikyu (Japanese: ミミッキュ, Hepburn: Mimikkyu) (MEE-mee-kyoo[1]) is a ghost/fairy-type Pokémon introduced in Generation VII.

Pikachu (ピカチュウ, Pikachuu) is an Electric-type Pokémon which was introduced in Generation I. Pikachu is renowned for being the most well-known and recognizable Pokémon. Over the years, Pikachu has become so popular that it serves as the Pokémon franchise mascot. It is the Version Mascot and First partner Pokémon for the game Pokémon Yellow and its remake, Pokémon: Let's Go, Pikachu!. It is also well known from the anime, where Ash Ketchum, the former protagonist, owns a Pikachu. It evolves from Pichu when leveled up with high friendship and evolves into Raichu when exposed to a Thunder Stone. When in Alola (Pokémon Sun and Moon and Pokémon Ultra Sun and Ultra Moon), it evolves into Alolan Raichu through exposure to a Thunder Stone. It also has a Gigantamax form, and can be found in Cramorant's Gorging Form.

Piplup (Japanese: ポッチャマ, Hepburn: Potchama) (PIP-plup[1]) is the Water-type First partner Pokémon of the Sinnoh region. It was introduced in Generation IV.

Lucario (Japanese: ルカリオ, Hepburn: Rukario) (loo-CAR-ee-oh) is a Fighting/Steel-type Pokémon introduced in Generation IV.

Scorbunny (Japanese: ヒバニー, Hepburn: Hibanii) is the Fire-type First partner Pokémon of the Galar region. It is one of the three First partner Pokémon revealed for the core titles Pokémon Sword and Pokémon Shield.

Slowpoke (Japanese: ヤドン, Hepburn: Yadon) (SLOW-poke[1]) is a Water/Psychic-type Pokémon introduced in Generation I. It has a pure Psychic-type Galarian Form introduced in Generation VIII.

Solgaleo (Japanese: ソルガレオ, Hepburn: Sorugareo) (SOUL-gah-LAY-oh), The Sunne Pokémon, is a Psychic/Steel-type Legendary Pokémon introduced in Generation VII. It is the mascot for Pokémon Sun. It is Lunala's counterpart and one of the two evolved forms of Cosmoem. It, alongside Lunala and Necrozma, is a member of the Light Trio.

Tepig (Japanese: ポカブ, Hepburn: Pokabu) (TEH-pig) is a Fire-type Pokémon introduced in Generation V.

Xerneas (Japanese: ゼルネアス, Hepburn: Zeruneasu) (ZURR-nee-us) is a Fairy-type Legendary Pokémon introduced in Generation VI. It is the mascot for Pokémon X. It is Yveltal's counterpart and is a member of the Aura Trio alongside Yveltal and Zygarde.

Yveltal (Japanese: イベルタル, Hepburn: Iberutaru) (ee-VELL-tall) is a Dark/Flying Legendary Pokémon introduced in Generation VI. It is the mascot for Pokémon Y. It is Xerneas' counterpart and is a member of the Aura Trio, alongside Xerneas and Zygarde.

The MSN-04 II Nightingale (MSN-04II ナイチンゲール?) is a mobile suit introduced in Mobile Suit Gundam: Char's Counterattack - Beltorchika's Children. It was piloted by Char Aznable during Char's Rebellion .The MSN-04 II Nightingale was developed exclusively for Char Aznable, the leader of Neo Zeon. its most prominent feature was the incorporation of a Psycho-Frame. As a result, the Nightingale was completed as a Mobile Sit (MS) with capabilities akin to a Mobile Armor (MA). The Nightingale was an MS with exceptional abilities and its silhouette greatly deviated from a human design, with overhanging binders on both shoulders, a large rear armor piece that extended backwards, and front armor as large as the legs. Despite its unconventional design., mobility devices placed on the shoulders and rear armor enabled the MS to gain high mobility and operability, and the five propellant tanks allowed for long combat operations. It was armed with a long-range, high-0power Large Mega Beam File, a Beam Tomahawk equipped with three devices, and 10 funnels. This armament configuration enabled the MS to gain combat abilities that could flexibly adapt to firefights, melee combat, and perform all-range attacks. The Nightingale was deployed during Char's Rebellion and overwhelmed Amuro Ray's RGZ-91 Re-GZ. It was as powerful as the RX-93-ν2 Hi-ν Gundam during the battle over Axis .

The RE/100 1/100 MSK-008 Dijeh is a detailed model kit representing Amuro Ray's custom mobile suit from the Mobile Suit Zeta Gundam series. This kit offers an engaging building experience, capturing the unique design and features of the Dijeh. Key Features: Scale and Materials: 1/100 scale model kit crafted from high-quality injection-molded plastic, ensuring durability and ease of assembly. Articulation: Features multiple points of articulation, allowing for dynamic poses that showcase the Dijeh's combat capabilities. Weaponry and Accessories: Equipped with: Beam Rifle Clay Bazooka Beam Naginata Design Details: The model includes a movable mono-eye and detailed surface features, accurately reflecting the Dijeh's distinctive appearance. Release Information: Released as part of Bandai's RE/100 line, this kit brings the Dijeh to life with modern engineering and enhanced detail. The RE/100 1/100 MSK-008 Dijeh is an excellent addition for fans of the Zeta Gundam series and model builders seeking a detailed representation of this unique mobile suit.

Bandai RG #43 1/144 Wing Gundam Zero The Bandai Real Grade (RG) #43 1/144 Wing Gundam Zero delivers exceptional detail, articulation, and visual impact inspired by its appearance in Mobile Suit Gundam Wing: Endless Waltz. Featuring the iconic four-wing system, advanced inner frame engineering, and the Twin Buster Rifle, this high-quality kit brings one of the most recognizable Gundams to life in stunning detail. Product Highlights Official Bandai RG #43 release Highly articulated inner frame for dynamic posing Signature four-wing system with expressive articulation Twin Buster Rifle with combined firing mode Color-molded parts requiring no paint Snap-fit assembly with detailed panel lines Description The RG Wing Gundam Zero features advanced mechanical design and premium molding that make it an ideal choice for both collectors and Gunpla builders. The wing units allow elegant mid-air poses, while the inner frame ensures stability during action-oriented stances. Rich surface detail and color separation provide a finished appearance right out of the box. This model kit includes all of Wing Zero’s signature equipment, hand parts, and marking stickers, offering builders a complete display-ready package from assembly to final posing. Box Contents Wing Gundam Zero 1/144 model kit parts Twin Buster Rifle Shield Two beam sabers Interchangeable hands Marking sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Real Grade (RG) RG Number #43 Scale 1/144 Mobile Suit XXXG-00W0 Wing Gundam Zero Material Injection-molded plastic JAN / GTIN-13 4573102688743 UPC Not officially assigned

The GNT-0000 00 Qan[T] (aka 00Q, 00 Qan[T], pronounced "Double-Oh Quanta") is the successor to the GN-0000+GNR-010 00 Raiser in Mobile Suit Gundam 00 The Movie: Awakening of the Trailblazer. It is piloted by Setsuna F. Seiei. A fifth Generation Gundam designed and tuned specifically for Celestial Being's first Innovator, Gundam Meister Setsuna F. Seiei, 00 Qan[T] is the latest mobile suit (MS) designed by Celestial Being. Its blueprints originated from an Innovators draft and was sent over from Veda/Tieria (with level 7 clearance) for Celestial Being engineers to analyze and develop. As the successor to GN-0000+GNR-010 00 Raiser, 00 Qan[T] contains an upgraded and improved Twin Drive System and possesses the new Quantum System. Whereas Zabanya and Harute were developed using parts from their predecessors, 00 Qan[T]'s was made as a new mobile suit. The development resources and focus used on 00 Qan[T] is that of a higher level than the other two.The unit possesses two newly created GN Drives specifically made for its Twin Drive System. The drives are located on its back and underneath the shield respectively and were developed by a team led by Linda Vashti at Jupiter. As these newly made solar furnaces are developed with perfect synchronization in mind, no external help with stabilization is required, thus 00 Qan[T] does not need a support unit such as 0 Raiser like 00 Gundam did. They can also be directly connected with each other which would result in a higher sync rate and output, however when used this way they become extremely hard to control. To prevent unexpected problems, they are usually kept separated.The Quantum System is also the successor to 00 Raiser's Trans-Am Burst System, which allows Setsuna to expand his quantum brainwaves. It creates a massive quantum field that extends an Innovator's consciousness to communicate with sentient minds for advanced communications. To activate the system, the Innovator pilot's quantum brainwaves must be active. Once scanned, the two GN Drives connect. Finally, large portions of Qan[T]'s armor is purged, and the condensers within the limbs and the GN Drive core extend beyond the frame of the suit.Like its predecessors (the Exia and 00), 00 Qan[T] is a close combat-oriented mobile suit. Its primary weapon is the GN Sword V, the latest in the line of dual functioning weapons that can alternate between sword and rifle modes. A GN Shield is mounted over the left shoulder in a similar fashion to one of the GN-0000 00 Gundam's GN Drives. The shield itself can deploy 6 GN Sword Bits (stored on the sides of the shield) which serve many functions, but are primarily remote blades. The Sword Bits can be attached to the GN Sword V to form either a powerful buster sword or a buster rifle for combat. For added defense, 00 Qan[T] can deploy a GN Field by placing the 6 Sword Bits in a closed spherical formation and can activate the Trans-Am System to enhance its overall capabilities.00 Qan[T] can quantize like 00 Raiser, but with improvements over the original, it is now able to execute this function at will. Unlike 00 Raiser, 00 Qan[T] is capable of quantizing not only for short distances, but all the way across the universe, which was shown when it teleported to the ELS homeworld in the far side of another galaxy. 00 Qan[T]'s Sword Bits have the ability to form a portal and aid in the process. This similar function is also present in GNW-100A Sakibure that appeared 50 years after the end of the movie.The head piece of the 00 Qan[T] acts as a controlling device for the Sword Bits. The particle controlling capabilities of the antennae have yet again improved, allowing the 00 Qan[T] to communicate using Quantum Brainwave interfacing. Ian Vashti has designed the head of the 00 Qan[T] to resemble Setsuna's previous Gundams, the GN-001 Gundam Exia and the GN-0000 00 Gundam.The arm parts of the 00 Qan[T] were made to allow the 00 Qan[T] to wield it's close combat weapons to the fullest. The wrist joints were made to be so flexible that they actually could move like a human arm. The GN Condensers located within the arms have been improved, allowing GN Particles to be transferred to the weapons more smoothly and effectively than the 00 Raiser's condensers.The leg parts of the 00 Qan[T] have built in AMBAC (Active Mass Balance Auto-Control) capabilities to allow it to achieve high maneuverability in zero-G conditions. The knee joints of the 00 Qan[T] were made to be as fluid in motion as a real human knee, with GN condensers located in them, also improved. Some parts of the legs were developed from the GNZ-series, while other parts bore massive improvements to the original parts from the 00. The remaining parts were derived from other GN Drive equipped mobile suits.Being Celestial Being's most advanced MS to date, the 00 Qan[T] is so powerful that it could possibly have eliminated the entire ELS attack force single-handedly had Setsuna chosen not to communicate with them. However, it should be noted that this is just a hypothetical calculation by Veda. It excludes important factors such as ELS' healing abilities, and the physical impossibility of the pilot fighting without food or rest over a whole week of constant battling, making it a very difficult feat to achieve nevertheless.

XM-X1 Crossbone Gundam X-1 is a testbed mobile suit developed by the Earth Federation's Strategic Naval Research Institute (SNRI). It was featured in the Mobile Suit Crossbone Gundam manga series.The F97 is specifically designed by the SNRI to be used near Jupiter, where the strong gravitational field creates serious propulsion problems. Units operating on Earth and near Earth's orbit usually achieve high mobility using thrusters distributed across the mobile suit's body. However, under Jupiter's gravitational influence, this would require enlargement of the thrusters, leading to an increase in the mobile suit's size and mass. Larger thrusters would require more powerful reactors, which in turn adds more mass.To resolve this, the F97 is equipped with a set of four movable thrusters in an X-shaped array. Used in tandem with the unit's AMBAC system, these thrusters allow high mobility around Jupiter's orbit without increasing the size and mass of the mobile suit – and when combined into one huge thruster column, they are capable of dramatically increasing the unit's top speed. Of course, there are tradeoffs; a unit designed for these unique conditions like the F97 is difficult to control on or near Earth.Though technically the F97 are general purpose mobile suits, they were designed with extra emphasis on their close range combat abilities. With their high mobility, they easily outmaneuver most enemy mobile suits, allowing them to slip into close range and past the beam shield. Additionally, the Crossbone Vanguard leader, Berah Ronah, sought to fight the war against the Jupiter Empire with as little loss of life as possible. With blades it is easier to take out a mobile suit without destroying the cockpit than it is with a beam rifle.Another notable equipment is the Anti-Beam Coating cloak, which can be stored on the F97's back and unfolded when needed. When unfolded, it covers the mobile suit's entire body, and disperses beam energy over the cloak. It can usually withstand five standard beam shots without spending any energy, with the additional advantage of stealth. Like its predecessor F91 Gundam F91, its "mouth" can be opened as a vent. The F97 is also equipped with a plug-in type core fighter, which mounts the movable thrusters and two standard beam sabers.Four units were made in total and given by SNRI to the Crossbone Vanguard. In order to cover this secret dealing, they were assigned the codes X-0, XM-X1, XM-X2, and XM-X3 and given the name Crossbone Gundam.

The ZGMF-X10A Freedom Gundam (aka Freedom, X10A) is a mobile suit introduced in the anime Mobile Suit Gundam SEED and is piloted by Kira Yamato. One of ZAFT's ZGMF-X series of Gundam units build in C.E. 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and its armaments include CIWS guns, beam sabers, shield, plasma beam cannons, railguns, and a beam rifle. When the latter three weapons are used simultaneously, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Due to its capabilities and loadout, the suit has a reputation as a specialized 'Mobile Suit Killer', but its high performance resulted in a complicated control system that demands extremely fast reaction speed and spatial awareness from its pilot.When required, the Freedom Gundam can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam has virtually unlimited combat endurance as it is equipped with a Neutron Jammer Canceller and powered by a nuclear reactor. Kira describes the suit as having over four times the power of the GAT-X105 Strike Gundam. However, what this exactly means is unclear. The Freedom Gundam is meant to operate alongside the ZGMF-X09A Justice Gundam, and they are often based on the warship, the FFMH-Y101 Eternal, which is designed specifically to maintain them. Even in CE 73, the suit is still considered by some people, such as Shinn Asuka, as the most powerful mobile suit out there. Overall, it is one of the Clyne Faction's symbols of power, along with the Eternal, the Archangel, and the Justice.

The FX-550 Skygrasper is an aerial support fighter introduced in the anime Mobile Suit Gundam SEED. The Skygrasper was a fighter aircraft originally designed to support the GAT-X105 Strike Gundam. To fulfill this role, it was given the ability to mount the Strike Gundam's Striker Packs so as to deliver them to the mobile suit during combat, and this removes the need for the mobile suit to return to the hangar of its mothership for re-equipping. In addition, the Skygrasper can utilize many of the Packs' weapons and equipment, such as the Aile Striker's thrusters for additional speed and agility, the Sword Striker's anti-ship sword and rocket anchor for close range attacks, and the Launcher Striker's beam cannon for enhanced long-range firepower, allowing it to provide fire support for the Strike Gundam.On its own, the Skygrasper is armed with a turret-mounted beam cannon, two medium caliber cannons, four machine guns, and can launch anti-ship missiles, bombs, etc from the two weapons bays, making it a very capable air superiority fighter in its own right. In fact, the combination of these weapons and the Skygrasper's maneuverability grant it combat capabilities on par with most mobile suits. Like its predecessor, the F-7D Spearhead, the Skygrasper is capable of VTOL. The Skygrasper was eventually put into mass production by the Earth Alliance to support the Dagger series mobile suits that could utilize Striker Packs. These mass production units are mostly identical to the original two units assigned to support the Strike Gundam, except in their color schemes, where they are painted in gray and yellow instead of the original's brighter colors.

The GAT-X105 Strike Gundam is a prototype multi-mode mobile suit introduced in the anime Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to former mobile armor ace pilot, Mu La Flaga. The Strike Gundam is the most versatile of the five Gundams in the Earth Alliance's G Project and can be easily configured for various types of combat. Using its Striker Packs, it can be outfitted for high mobility combat (Aile Strike), long-range assault (Launcher Strike), or melee combat (Sword Strike). In addition, the Striker packs are also equipped with backup batteries that can extend the Strike's operation time. Built on the X100 series frame first adopted by the GAT-X102 Duel Gundam, the Strike also has the Phase Shift armor system. In terms of armament, the Strike itself is equipped only with two head-mounted CIWS and a pair of combat knives stored in the side skirt armor, but it can also be armed with a bazooka, a shield, and a beam rifle. Later on, the Strike Gundam was equipped with a Natural-use OS to allow its new pilot, Mu La Flaga, to control the suit effectively.

The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla from the anime series Gundam Build Fighters. It's built by Sei Iori and primary controlled by Reiji. The GAT-X105B/FP Build Strike Gundam Full Package is a Gunpla built by Sei Iori, and is a combination of the basic GAT-X105B Build Strike Gundam with the Build Booster and new weapons. As indicated by the name, it can be considered as the Build Strike with its complete weapons and equipment. The Build Booster is a support craft that when attached to the Build Strike adds a pair of Large Beam Cannons to the unit's standard armaments of four head-mounted Vulcan Guns and two Beam Sabers, and also improves its output. The Full Package also gives the Build Strike a Chobham Shield and a Beam Gun that can transform into a Beam Rifle, and later into the Enhanced Beam Rifle.

The RG GF13-017NJ Shining Gundam is a 1/144 Real Grade (RG) model kit from the classic anime Mobile Fighter G Gundam. This kit combines fine articulation, transformation gimmicks, and exquisite detail in a compact scale. Scale & Construction: 1/144 Real Grade—snap-fit build with no glue required, using PS/ABS/PP plastics, featuring inner frame and undergated parts for clean finishes. Articulation & Gimmicks: Full range of motion—ball-and-socket joints, double-jointed elbows & knees, tilting/rotating waist, swing-down hip joints, and ankle tilt for dynamic posing. Transformable to “Super Mode” and “Battle Mode” with no part replacement—deployable shoulder armor, leg and arm covers, movable internal verniers, and toe/ankle mechanics for stability. Core Lander docking, deployable cockpit hatch, and optional Shining Finger hand included—perfect for dramatic action scenes. Accessories & Contents: Core Lander Beam swords (long and short with effect parts) Multiple manipulators: fists, weapon-holding, open-palm (splayed/clawed), chop hands, and Shining Finger (right) Realistic decal sheet Release & Pricing: Released June 28, 2025 Materials & Build Notes: Made with high-grade plastics; undergated runners for clean builds; no glue or paint needed, though panel lining and topcoat can enhance details.