Shop Official Bandai Master Grade 1/100 Gundam Gunpla Model Kits

The Bandai MG 1/100 ASW-G-XX Gundam Vidar from Mobile Suit Gundam: Iron-Blooded Orphans marks the first Master Grade appearance of a Gundam Frame from the IBO universe. With a newly engineered internal structure and a sleek, aggressive design, this model kit captures the essence of Vidar's combat style and visual impact. Key Features: Scale and Materials: 1/100 scale MG model made of PS plastic, engineered for advanced articulation and mechanical realism. Weapons and Accessories: Handguns ×2 (stored on side skirts) Burst Sabers ×2 Burst Saber Blades (6 with pegs, 2 detached type) Interchangeable manipulators: Fists Open-palm Saber-holding Trigger-finger Design Details: Includes a removable face mask, articulated knee gimmicks, dynamic posing capabilities, and complete color separation to reduce the need for painting. Release Information: The MG Gundam Vidar was officially released on March 22, 2025. It is the first Iron-Blooded Orphans mobile suit in the Master Grade line, offering both a challenging build and high visual fidelity for Gunpla enthusiasts. The MG ASW-G-XX Gundam Vidar is a showcase of modern Gunpla engineering, ideal for modelers seeking a mechanical and stylistically sharp centerpiece from the IBO universe.

The MG 1/100 Gundam AGE II Magnum is a Master Grade model kit from the "Gundam Build Divers" series. Released in 2019, this kit features: Articulated joints for dynamic posing capabilities. Weapons including: 2 Beam Sabers 2 Hyper DODS Rifles 2 Shiguru Shields Transformation capability between Mobile Suit (MS) mode and Phoenix mode. New shoulder mold for increased strength and hip locking mechanisms for enhanced stability in both modes. Snap-fit assembly with color-coded plastic parts, minimizing the need for painting. Once assembled, the model stands approximately 7 inches (17.78 cm) tall, making it a notable addition to any Gundam collection.

The MG 1/100 RX-78-4 Gundam Unit 4 is a Master Grade model kit representing the RX-78-4 Gundam Unit 4 from Kunio Okawara's M-MSV design series, featured in "Mobile Suit Gundam Side Story: Space, To the End of A Flash." This kit includes: Articulated joints allowing for dynamic poses. Weapons including a mega beam launcher, hyper beam rifle, beam saber, and foldable shield. Snap-fit assembly with molded color parts, minimizing the need for painting. Once assembled, the model stands approximately 18 cm tall, making it a notable addition to any Gundam collection.

The MG 1/100 XM-X1 Crossbone Gundam X-1 Ver. Ka is a Master Grade model kit that brings the iconic mobile suit from the Mobile Suit Crossbone Gundam manga series to life. Designed by renowned mecha designer Hajime Katoki, this kit offers an intricate building experience, capturing the unique pirate-themed aesthetics and advanced weaponry of the Crossbone Gundam X-1. Key Features: Scale and Materials: 1/100 scale model kit crafted from high-quality injection-molded plastic, ensuring durability and precision in assembly. Articulation: Features multiple points of articulation, allowing for dynamic poses that showcase the Gundam's agility and combat readiness. Weaponry and Accessories: Equipped with: Beam Sabers Scissor Anchors with wires Heat Daggers Beam Shield/Brand Marker Anti-Beam Coating (ABC) Mantle Buster Gun Beam Zanber Zanbuster (combination of Buster Gun and Beam Zanber) Design Details: Includes a Core Fighter and a 1/100 scale pilot figure of Tobia Arronax. The kit also provides parts to build the Crossbone Gundam X-1 Kai (Custom) variant. Release Information: Released in September 2006 as part of Bandai's Master Grade series, this kit is a fan-favorite, offering both builders and collectors a detailed rendition of the Crossbone Gundam X-1. The MG 1/100 XM-X1 Crossbone Gundam X-1 Ver. Ka is an excellent addition for fans of the Gundam franchise and model builders seeking a unique and detailed representation of this distinctive mobile suit.

The MG 1/100 V2 Gundam Ver.Ka is a Master Grade model kit that brings the LM314V21 Victory Two Gundam from the Mobile Suit Victory Gundam series to life, designed by the renowned mecha designer Hajime Katoki. This kit offers an intricate building experience, faithfully replicating the mobile suit's complex transformation mechanisms and detailed design. Key Features: Scale and Materials: 1/100 scale model kit crafted from high-quality injection-molded plastic, ensuring durability and precision in assembly. Transformation Mechanism: Accurately reproduces the V2 Gundam's transformation into its various configurations, including the Core Fighter, Top Fighter, and Bottom Fighter, with meticulous attention to detail. Articulation: Features numerous sliding hatches and movable panels, providing extensive articulation for dynamic posing and display options. Weaponry and Accessories: Equipped with: Beam Rifle Beam Shield with clear parts Beam Sabers Hand parts with swappable fingers for added stability and expressive detail Design Details: Incorporates Katoki's signature design elements, enhancing both aesthetic appeal and functionality. The kit also includes two pilot figures, allowing for the choice between Uso Ewin or Marbet Fingerhat in the cockpit, and a standing figure of Shakti Kareen. Release Information: Released in December 2015 as part of Bandai's Master Grade series, this kit was highly anticipated, ranking #1 in a 2010 poll for the most requested Master Grade model. It commemorates the 35th anniversary of GunPla with its sophisticated engineering and design. The MG 1/100 V2 Gundam Ver.Ka is an exceptional addition for Gundam enthusiasts and model builders, offering a challenging and rewarding build that captures the essence of the Victory Two Gundam.

The MG 1/100 Musha Gundam MK-II is a stunning Master Grade model kit that reimagines the legendary Gundam MK-II with intricate samurai-inspired details. Designed for enthusiasts of both Gundam and traditional Japanese warrior aesthetics, this kit delivers an exceptional blend of style, precision, and craftsmanship. Key Features: Scale and Material: 1/100 scale model kit made from high-quality polystyrene, ABS plastic, and PVC for durability and precision. Samurai-Inspired Design: Features ornate gold-plated armor, kabuto-style headgear, and a bold black-and-gold color scheme with crimson accents. Dynamic Weaponry: Equipped with dual katanas, a naginata, and a musket-style rifle, providing versatile display options. Articulation and Poseability: Built on a robust Master Grade frame, offering exceptional articulation for dynamic action poses. Customization: Includes detailed stickers and decals for added personalization. Release Information: This model kit was released in 2009 as part of Bandai’s celebrated Master Grade line. It combines elements of the traditional Musha Gundam with enhanced details, making it a standout piece for collectors. The MG Musha Gundam MK-II is an ideal choice for modelers looking for a unique and highly detailed build. With its rich samurai heritage and Gundam legacy, it is both a rewarding project and an impressive display centerpiece.

The MG 1/100 Shin Musha Gundam Sengoku no Jin is a premium Master Grade model kit that seamlessly merges Gundam’s mecha design with traditional samurai aesthetics. This special edition captures the grandeur of Japan’s Sengoku era, making it a must-have for collectors and enthusiasts alike. Key Features: Scale and Material: 1/100 scale model kit made from high-quality polystyrene and ABS plastic for intricate detailing and durability. Authentic Samurai Design: Features a kabuto-inspired headpiece, ornate gold-plated armor, and a striking crimson and gold color scheme. Comprehensive Weaponry: Comes equipped with the Nichirinmaru katana, Denkoumaru naginata, Sankoumaru jumonji yari, and a Tanegashima rifle with silver mekki plating for added realism. Exclusive Display Accessories: Includes a folding screen illustrated by Naochika Morishita, dedicated stands for weapons, and a custom base for a display reminiscent of traditional Gogatsu Ningyo setups. Enhanced Articulation: Utilizes the inner frame from the Master Grade RX-78-2 Gundam Ver. One Year War 0079 for dynamic and expressive posing options. Release Information: This model kit was released in 2009 as part of Bandai’s Master Grade series, commemorating Gundam’s iconic legacy with a samurai twist. It remains a favorite among fans for its unique design and premium features. The MG 1/100 Shin Musha Gundam Sengoku no Jin delivers a rewarding build experience and serves as a breathtaking display piece, celebrating both Gundam lore and samurai heritage.

The System-∀99 ∀ Gundam (pronounced as "Turn A Gundam", aka "∀", "White Doll" or "Mustache") is the titular mobile suit of Turn A Gundam. It is piloted primarily by Loran Cehack. The Turn A Gundam was originally created for interstellar warfare in anticipation of invasion of forces outside the solar system and said to be the culmination of super-advanced technologies from generations past. As opposed to other weapons which were created to meet a specific purpose, the Turn A's design was unusual and built entirely on the premise of "single-machine operation", with the versatility to perform all military operations on its own. Owing to the fear of extrasolar forces, the Turn A was constructed with all restrictions of the development of weapons removed, and as a result no longer fits into the concept of a weapon.Unlike other mobile suits (even those that predate the Turn A itself), the Turn A is powered by a DHGCP (Discontinuous Hyperoscillation Gauge Collapsing Pile) power plant in its abdomen, which is essentially an artificial black hole. This is used in conjunction with an innovative reactionless I-Field Beam Drive system to move the suit's limbs and provide thrust. As a result, the unit's chest is almost entirely hollow and can equip various weapons inside, such as missiles or beam cannons. The legs are also hollow due to the use of the I-Field Beam Drive, and contain an array of thruster vanes which are used to power the suit's jumps and flight. This leaves the back of the unit free to store more weapons and equipment if desired. The Gundam's armor is also covered with self-repairing nanomachines, dubbed "Nanoskin".The Turn A's armaments consisted of a beam rifle, two beam cannons, two beam sabers and a shield. It can also mount various weapons (such as missiles) in the chest to compliment its basic weaponry. It can also use a powerful I-Field capable of covering a large area and affecting matter. To further enhance its combat power, the Turn A has support areas called DOC Bases (Device Operation Control) which hold various armaments, enabling it to adapt to the situation at hand by equipping a variety of weapons. One of these DOC Bases was discovered in C.C. 2345. However, the base had been sealed and not maintained by any nanomachines during the thousands of years the Turn A was buried, so almost all its weapons crumbled upon exposure to air. The only weapon still usable was a hyper hammer that was simple and thick enough to remain intact for a short while without maintenance.The Turn A's on-board nanomachines are capable of a devastating attack known as the "Moonlight Butterfly" (named after the visual appearance of the attack). The Turn A's nanomachines have the ability to disintegrate all matter that includes artificial objects as well as organic materials, and can merge with weather systems to create large ionic storms capable of covering a much wider area. These nanomachines can be used offensively or defensively for all range attack and defense. The nanomachines are capable not only of destroying technology however, but of maintaining and repairing it too. This ability is not instantaneous though, and it requires a considerable amount of time. The back weapon pallet of the Turn A was originally planned to be equipped with weapons based on the Seventh Generation Minovsky Physical Theory (7th-GMPT), a nondestructive MS-incapacitating technology, during the conceptual phase of the "System ∀". However, the development of such weapons was not completed in time for the demonstration test for "System ∀", and so beam sabers were provisionally installed for melee combat.

The RX-78GP01 Gundam "Zephyranthes" (aka Zephyranthes, GP01, Unit 1) is a prototype general-purpose mobile suit introduced in the Mobile Suit Gundam 0083: Stardust Memory OVA. It was piloted by Kou Uraki.  Developed as part of the Gundam Development Project, the GP01 was a ground-use general purpose mobile suit intended to be an improvement of the RX-78-2 Gundam, which achieved exceptional battle results during the One Year War. Being an experimental unit, it was equipped with an increased number of sensors, some of which were exposed due to being temporary. Compared to the RX-78, its sensors and balancer were upgraded or redesigned. Overall, the GP01 was designed to allow movement closer to that of a human (a design concept that would eventually evolve into the Movable Frame). In order to ensure the survival of the pilot and the combat data, the GP01 retained the Core Block System. However, to address the RX-78's structural weakness in the stomach, the GP01 adopted an experimental "horizontal in the body" structure instead of the previously used "vertical in the body" structure. The GP01's main generator, main thrusters, and operation and control instruments were all integrated into its FF-XII Core Fighter II. In addition, when docked, the Core Fighter's beam guns serve as the GP01's beam sabers. Thanks to this design, the Core Fighter's propellant, thrusters, and weapons were no longer dead weight when docked. By switching the Core Fighter, the GP01 could operate both on Earth and in space, though additional readjustment and maintenance was still needed. Thanks to this design, despite being a general-purpose mobile suit, its performance rivaled or exceeded dedicated ground-use and space-use mobile suits in both environments.

The RGM-79 GM (aka GM, pronounced Jim) was the first mass-produced mobile suit of the Earth Federation. It first appears in Mobile Suit Gundam. The RGM-79 GM is a mass-produced mobile suit based on the RX-78-2 Gundam. Its basic frame is easily adaptable to modifications into mission specific GM models, and has a fairly high level of mobility, for the time, both on Earth and in space. It has a maximum acceleration of 0.94 Gs in space, which is better than the Gundam's and roughly twice of the Zaku's. On Earth's surface, the GM is also faster than the Zaku II. The armor of the GM uses Titanium Alloy, a sturdy metal that could be refined more quickly and easily than the Gundam's Luna Titanium Alloy. Although titanium alloy is less durable than Luna Titanium, it is also slightly lighter which reduces the GM's overall mass compared to the Gundam's and is still superior to the Zaku II's super-high tensile steel armor. The GM was primarily armed with a beam spray gun, a less powerful version of the Gundam's beam rifle but could still destroy MS in one shot. Early in production, the beam spray gun had yet to be mass-produced so most GMs were equipped with various machine guns. These machine guns continued to be used by the GMs later, and the machine could also use the Gundam's beam rifle when required. It could also use a mass production version of the Gundam's Hyper Bazooka for heavier firepower. For close combat, the GM has a beam saber, and a shield similar to the one used by the Gundam. Commander units sometimes featured a second beam saber. Lastly, the GM has a pair of head-mounted 60mm vulcan guns for intercepting missiles, small vehicles or to stop enemy MS from closing in. From the GM started the RGM series that remained the mainstay of the Federation's mass production mobile suits until the end of the Federation itself.

The AMS-119 Geara Doga is a mass-production general-purpose mobile suit introduced in Mobile Suit Gundam: Char's Counterattack.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.

The RX-9/C Narrative Gundam C-Packs is a mobile suit introduced in Mobile Suit Gundam Narrative and is piloted by Jona Basta. The C-Packs was the third optional equipment for the RX-9 Narrative Gundam and is embellished with Psycho-Frame as additional armor. It is said that no such equipment plan originally existed for the MS, resulting in minimal conversions being hastily applied to the MS. Despite its unusual origin, the MS did achieve its concept to have an increased amount of Psycho-Frame, proving the high extensibility of the Narrative Gundam. This configuration of the MS is also called the "Psycho Package" and the Psycho-Frame used to create it was independently collected by Luio & Co.  

Bandai China 2024 Limited Edition MG 1/100 Cross Contrast Colors Gundam Barbatos Bandai China Estimated Release Date: December 2024 Estimated Delivery: 1st Quarter 2025 Grade: MG Scale: 1/100 Please read our Preorder FAQ carefully before placing the order.  

XM-X1 Crossbone Gundam X-1 is a testbed mobile suit developed by the Earth Federation's Strategic Naval Research Institute (SNRI). It was featured in the Mobile Suit Crossbone Gundam manga series.The F97 is specifically designed by the SNRI to be used near Jupiter, where the strong gravitational field creates serious propulsion problems. Units operating on Earth and near Earth's orbit usually achieve high mobility using thrusters distributed across the mobile suit's body. However, under Jupiter's gravitational influence, this would require enlargement of the thrusters, leading to an increase in the mobile suit's size and mass. Larger thrusters would require more powerful reactors, which in turn adds more mass.To resolve this, the F97 is equipped with a set of four movable thrusters in an X-shaped array. Used in tandem with the unit's AMBAC system, these thrusters allow high mobility around Jupiter's orbit without increasing the size and mass of the mobile suit – and when combined into one huge thruster column, they are capable of dramatically increasing the unit's top speed. Of course, there are tradeoffs; a unit designed for these unique conditions like the F97 is difficult to control on or near Earth.Though technically the F97 are general purpose mobile suits, they were designed with extra emphasis on their close range combat abilities. With their high mobility, they easily outmaneuver most enemy mobile suits, allowing them to slip into close range and past the beam shield. Additionally, the Crossbone Vanguard leader, Berah Ronah, sought to fight the war against the Jupiter Empire with as little loss of life as possible. With blades it is easier to take out a mobile suit without destroying the cockpit than it is with a beam rifle.Another notable equipment is the Anti-Beam Coating cloak, which can be stored on the F97's back and unfolded when needed. When unfolded, it covers the mobile suit's entire body, and disperses beam energy over the cloak. It can usually withstand five standard beam shots without spending any energy, with the additional advantage of stealth. Like its predecessor F91 Gundam F91, its "mouth" can be opened as a vent. The F97 is also equipped with a plug-in type core fighter, which mounts the movable thrusters and two standard beam sabers.Four units were made in total and given by SNRI to the Crossbone Vanguard. In order to cover this secret dealing, they were assigned the codes X-0, XM-X1, XM-X2, and XM-X3 and given the name Crossbone Gundam.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

The AGE-2 Gundam AGE-2 Normal is the successor of the AGE-1 Gundam AGE-1 Normal introduced in the Asemu Arc of Mobile Suit Gundam AGE. It is piloted by Asemu Asuno.

The AGE-1 Gundam AGE-1 Normal is one of four titular mobile suits featured in the Flit Arc and Asemu Arc of the Mobile Suit Gundam AGE anime. It was mainly piloted by Flit Asuno and later by Asemu Asuno.

GN-0000+GNR-010/XN 00 XN Raiser (aka 00 XN Raiser, pronounced Double-Oh Sun Raiser), is the combination of the GN-0000 00 Gundam and the GNR-010/XN XN Raiser. It appears in the Mobile Suit Gundam 00V side story. 00 XN Raiser carries a pair of GN Buster Sword IIIs that can combine into one large sword. The additional pair of manipulator arms on the XN Raiser allows the 00 XN Raiser to carry more weapons, as well as grant it another pair of arms for combat use. XN Raiser's binders do not dock into the 00 Gundam's twin GN Drives; instead, they fold up when the XN Raiser is docked onto the 00 Gundam. The entire system docks onto the 00 Gundam's back as a weapons backpack.

The RMS-099 Rick Dias (RMS-099 リック・ディアス Rikku Diasu?) is a second-generation mass-production attack-use mobile suit introduced in the anime Mobile Suit Zeta Gundam. Developed by Anaheim Electronics, the RMS-099 (MSA-099, MSA-009) Rick Dias became one of the first mass-produced mobile suits of the AEUG's Zeta Project for their fight against the corrupt Titans. Because many engineers who worked on the Rick Dias were former Principality of Zeon members, the Rick Dias featured many similarities to Zeon mobile suits such as a mono-eye sensor. Originally, the Rick Dias ("Dias" is derived from Bartolomeu Dias, the Portuguese explorer who first rounded the Cape of Good Hope) was supposed to be called γ Gundam (Gamma Gundam) as it is built out of the new Gundarium γ. This material was developed by Axis and has strength similar to standard Gundarium yet weighs less, making the suit lighter and thus allowing it to accommodate a greater fuel capacity.The Rick Dias is one of the earlier mobile suits to use the 360-degree panoramic cockpit, and the first original design to be constructed by the AEUG. One notable feature is that unlike other mobile suits at the time, the cockpit of the Rick Dias is built into its head and not the chest. Built into its hands are specialized launchers that can be used to launch fire-suppressing gas or a binding adhesive. For combat, the Rick Dias can be equipped with a variety of weapons, making it a versatile mobile suit. Among its built-in weapons include 55mm vulcan phalanx in its head and a beam saber stored on the underside of a backpack-mounted rack. For ranged combat, the Rick Dias is equipped with a pair of beam pistols stored in the backpack-mounted rack. It can also be optionally equipped with a clay bazooka and a beam rifle.