Shop Official Bandai Master Grade 1/100 Gundam Gunpla Model Kits

The F91 Gundam F91 (F91 ガンダムF91 Effu Kujūichi Gandamu Fōmyura Nainti Wan?) is a mobile suit introduced in the movie Mobile Suit Gundam F91, in which it was piloted by Seabook Arno.[6][7] Harrison Madin piloted two production type units in custom colors. Based on F90V Gundam F90 VSBR Type, the F91 is a prototype machine created under SNRI’s ‘Formula Project’. The Formula Project, also known as F Project, is a miniaturized MS development program meant to address technological problems such as the upsizing and increasing cost of MS, and to rectify Anaheim Electronics’ monopolization of the MS industry. The F91 was developed to reached the ‘performance limit tidemark of present day MS’, and as such, its capabilities exceed that of contemporary machines. SNRI only referred to it by its model number, F91. It was later given the code name "Gundam F91" by Space Ark captain Leahlee Edaberry as its face resembled the Gundam’s.Befitting its smaller size, the Gundam F91 has a small reactor located in its enlarged backpack, surrounded by high-output thrusters. Despite its reduced size, the reactor has a high output, allowing the suit to drive multiple beam weapons including a beam rifle, two beam sabers, a beam launcher, a beam shield, and a pair of variable speed beam rifles (also known as VSBRs). While the first two beam weapons are common among contemporary mobile suits, the last three are of new designs. The beam launcher is a beam weapon equivalent of a projectile firing bazooka. The beam shield generates a highly defensive energy shield to block beam and projectile attacks. The VSBR is the Gundam F91’s most powerful weaponry, and is capable of firing beams of different speed to achieve either high destructive power or high penetrative power. Other weapons include two Vulcan guns and two mega machine cannons.With its reduced size and the increase in output, the Gundam F91 has a drastically improved power-to-weight ratio, allowing it to attain higher mobility than MS of earlier eras. Its mobility is on par with the miniaturized MS deployed later by the Crossbone Vanguard. It also has special features such as the Bio-Computer, MCA (Multiple Construction Armor) structure, and the MEPE (Metal Peel-off Effect) phenomenon. The Bio-Computer is installed in the suit’s head and feeds battle data directly to the pilot, but only a Newtype pilot can draw out its full potential. Accompanying the installment of the Bio-Computer, a head-mounted coolant and heat discharging system were also implemented, with the face guard opening to discharge heat under certain circumstance.The MCA structure incorporates electrical functions into the suit’s armor, allowing for more efficient use of the F91's limited internal space. The MEPE is a byproduct of the MCA structure. It helps the suit to dissipate excess heat by shedding the outer layers of its armor, and in the process, creates afterimages with mass to confuse enemy pilots, as well as the sensors of enemy machines. However, the MEPE is only activated under specific conditions.The Gundam F91’s high performance is not without drawbacks; its full operating mode is too much for normal pilots to handle. Thus, limiters were installed to make the suit more manageable; only a Newtype pilot can handle the full operating mode. When the Bio-Computer - via the Bio-Sensor in the pilot’s linear seat - determines that a Newtype is at the controls, it will disable the limiters and allow activation of the full operating mode. In this mode, the suit performs at its maximum potential and forced cooling is activated. This results in the suit radiating heat from all over its body: the face guard opens to vent heat, the shoulder-mounted heat radiations fins are deployed, the retractable thruster units on the back of the lower legs and the associated fins are activated, and the MEPE phenomenon occurs. All these are to reduce damage to the machine caused by movement overload during the full operating mode, and to protect the Bio-Computer that is sensitive to high heat. It is also worth noting that the front grill that takes up most of the chest and abdomen is a heat sink.After the war with the Crossbone Vanguard, an unspecified but extremely small numbers of Gundam F91s were manufactured. The MCA, MEPE, and full spec Bio-Computer were omitted from these production type units; inclusion of these technologies in the prototype unit was more for experimental purposes. Despite this, the catalog specifications of these machines are still comparable to the prototype’s. Although the face guard opening mechanism is retained in all production type units, only certain units for ace pilots (such as Harrison Madin’s) can access the full operating mode through improvements in the cooling system and various devices. However, these ace-used units still do not have the MEPE function due to the enhanced cooling system, as well as the change in the materials used in the final layer of armor.

The MSA-003 Nemo is a mobile suit introduced in the anime Mobile Suit Zeta Gundam. Its design was later updated for the light novel/OVA series Mobile Suit Gundam Unicorn. Based on the Earth Federation Forces's RMS-179 GM II, the MSA-003 Nemo is a mass-production general-purpose mobile suit developed by Anaheim Electronics for the AEUG. As Anaheim Electronics had bought over Zeonic Corps that worked for the Principality of Zeon, its mobile suit technology has Zeon influences and as a result, the Nemo has a mixture of both Zeonic and Federation technologies.Like most other mobile suits created during the Gryps War, the Nemo has an internal movable frame. Its movable frame is of a new design and reflects the data gained by Anaheim Electronics from the development of the RMS-099 Rick Dias and the MSN-00100 Hyaku Shiki. Thanks to this movable frame, the Nemo has high versatility and can operate in various environments such as zero-gravity, tropical regions, and cold climates. In addition, its legs' movable frame enables high mobility regardless of the environment, and as a result of considering Earth descent operations, it has a highly flexible structure with excellent drop and impact resistance. The Nemo's thrusters layout is designed using the RGM-79SP GM Sniper II's as a reference and this is due to part of the Nemo's development staff having worked on the latter during the One Year War.Compared to the GM II's titanium alloy ceramic composite, the Nemo has a more durable Gundarium alloy armor. As this armor is produced using the same technology as the RMS-108 Marasai's (another Anaheim Electronics' mobile suit, but provided to the Titans), it has high cost-effectiveness. Most of the Nemo's armaments are the same as those used by existing MS, and it could also use other armaments made by the Federation or Zeon. The Nemo was also relatively easy to pilot even for less skilled recruits, and overall, it was an excellent machine with performance superior to the GM II and RMS-106 Hizack.

The GAT-X105+P202QX Strike Gundam IWSP (aka Strike IWSP) is a prototype mobile suit introduced in Mobile Suit Gundam SEED MSV. The Integrated Weapons Striker Pack (IWSP) combines the primary characteristics of the Aile, Sword and Launcher Striker Packs, allowing the Strike Gundam to handle different combat situations with one set of equipment. It also grants mobile suit the ability to fly within the atmosphere. Although powerful, the IWSP is highly complex and difficult to use.The IWSP was originally developed by PMP Company, but was abandoned due to energy issue. Orb's Morgenroete Inc. later acquired one of the prototypes and solved the energy issue using their superior battery technology. As the Strike IWSP has no ranged beam weapon, it can be equipped with the standard beam rifle if necessary.After the war, the IWSP is revived by Actaeon Industries in the form of AQM/E-M1 IWSP, which is functionally identical to the earlier P202QX IWSP, despite some differences in appearance. Phantom Pain fit this IWSP pack onto their newly built Strike Gundam which has darker phase shift armor colors. Data obtained from this Strike Gundam IWSP was used in the development of Strike Gundam E, as well as the Noir, Jet and Doppelhorn striker packs.

The OZ-13MS Gundam Epyon is a mobile suit introduced in Mobile Suit Gundam Wing. Originally piloted by Heero Yuy, it was later given to Zechs Merquise. Based on data from the OZ-00MS Tallgeese and the other Gundams, the Gundam Epyon was created by Treize Khushrenada while he was placed under confinement by the Romefeller Foundation. In keeping with Treize's philosophy, the Epyon eschews cowardly long-range weapons in favor of chivalrous close combat. However, when the suit becomes a part of White Fang, a pair of Vulcan guns are added to the head.[1] Its main weapons are a segmented, whip-like heat rod mounted on a shield and a powerful beam sword whose energy is supplied by a direct connection to the Epyon's generator. Treize also installed a modified version of the Zero System known as Epyon System in the cockpit, making this suit a powerful opponent. The Epyon can also transform into a "mobile armor" mode for high-speed flight and cruising in space. It resembles a mythological dragon in this mode, however, its primary weapons are inaccessible save for the Epyon Claws which are also used as landing gear in this form.Gundam Epyon EW is Hajime Katoki's redesign of Epyon in a similar fashion to other EW version of the first five Gundams and included in New Mobile Report Gundam Wing: Frozen Teardrop as well as Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. It is later given additional equipment known as 'Sturm Und Drang' that can be used for both defense and offense.

The XXXG-01D Gundam Deathscythe (aka Deathscythe, Gundam Zero-Two or Deathscythe Ver.Ka.) is the second of five Gundams sent to Earth from the Space Colonies in the manga New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers. It was piloted by Duo Maxwell. The Gundam Deathscythe was the "masterpiece" of Professor G. It has outstanding stealth capabilities, with a pair of Hyper Jammers mounted on its backpack that prevented the Gundam from showing up on radar or visual sensors, rendering it invisible to most electronics. This allowed it to sneak into facilities and even right up to enemy mobile suits without being detected. With the highest speed amongst the original 5 Gundams, the Gundam Deathscythe's battle style revolves around approaching the enemy rapidly, striking and then retreating.The Deathscythe's primary weapon was its namesake beam scythe. The power and reach of the scythe enabled it to destroy most single (and sometimes multiple) targets in one sweep. The Deathscythe also carries a Buster Shield on its left arm, which doubled as launchable scissor katar. Rounding out its arsenal was a set of head-mounted vulcan guns.The suddenness with which this sinister looking Gundam arrive, its invisibility on sensors, and the speed and ferocity of its attacks all strike great fear in its enemies, befitting its grim reaper visage.

The GAT-X105+AQM/E-X01 Aile Strike is a prototype high mobility mobile suit introduced in Mobile Suit Gundam SEED. Its primary pilot was Kira Yamato before it was passed down to ace pilot Mu La Flaga. The AQM/E-X01 Aile Striker is the most commonly equipped Striker pack for the Strike as it provides the greatest versatility. Thanks to the powerful vernier thrusters built into the Aile Striker, the Strike Gundam becomes an all purpose combat mobile suit with enhanced speed and maneuverability compared to its base capabilities.Despite the strength of the thrusters, they do not perform well enough for true flight capabilities inside Earth's atmosphere. However, they do allow the Strike to glide in the air for a short time and enhance its jumping capabilities to the point that it can combat mobile suits on Guuls that are flying low. Besides the standard armament of the GAT-X105 Strike Gundam, the Aile Striker pack adds a pair of beam sabers to the suit's armament.

The XXXG-00W0 Wing Gundam Zero (ウイングガンダムゼロ EW Uingu Gandamu Zero?) (aka Wing Zero) is a mobile suit that appears in the OVA/movie Mobile Suit Gundam Wing Endless Waltz and the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers. Wing Zero was based on the Zero Frame technology developed by the five Gundam Scientists, which was an inner frame with all the necessary components for the mobile suit to operate, completely separate from the armor platings and energy conduits for weapons. The performance of the frame itself surpasses that of the OZ-00MS Tallgeese, and the complete separation of armor and internal structure allows Wing Zero to continue fighting after losing up to 90% of its armor.In the Glory of the Losers manga, Wing Zero is developed from the wreckage of the destroyed Wing Gundam Proto Zero, and upgraded with wing binders from the OZ-00MS Tallgeese Flugel. It combines the armament and equipment of the TV version and the EW version, such as having a shield and being able to transform into Neo-Bird Mode.

The RMS-108 Marasai, also known as the MSA-002 Marasai is a second-generation mobile suit in the Universal Century timeline. It first appeared in the series Mobile Suit Zeta Gundam. The RMS-108 Marasai was developed using Zeon design principles combined with technology pioneered by the Earth Federation during the One Year War. Technologically based on the RMS-106 Hizack, the Marasai features improved technologies, such as a movable frame, Gundarium Alloy armor instead of a titanium alloy that improves overall defense, greater sensor range, greater acceleration, and a more powerful Minovsky type ultracompact fusion reactor. It is equipped with high-power thrusters that allow atmospheric flight under gravity for a short period of time.Alongside its technological improvements, the Marasai is also several tons lighter than Hizack when measuring its empty weight. The Marasai did not have as large a weapon selection as the Hizack however, because the Hizack was often equipped with older weapons used by Zakus, such as machine guns and heat hawks, while the Marasai used only advanced beam weapons. The Marasai's standard weapons are a beam rifle, two beam saber, and two head mounted Vulcan guns. A large shield was attached to its right shoulder, much like Zeon's Zaku line of mobile suits.

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

The RX-178 Gundam Mk-II is a mobile suit introduced in the anime series Mobile Suit Zeta Gundam. It is a successor of the famous RX-78-2 Gundam that served in the One Year War. A direct descendant of the RX-78-2 Gundam developed by the Titans, the Gundam Mk-II is the first mobile suit to utilize the new movable frame concept. In this new concept, rather than merely serving as a structural framework, the movable frame incorporates all the mobile suit's vital mechanisms, including the actuators and control systems required for movement, and excludes the mobile suit's weapons, armor, and propellant tanks. This approach dramatically improves the mobile suit's responsiveness, reliability, and energy efficiency, as well as making it far more agile than traditional designs.Another characteristic of the Gundam Mk-II is that some of its legs' movable parts are exposed and this design feature is based on the prevailing idea at that time that avoiding being hit by the enemy is the preferable choice. The origin for this idea is because no existing armor can fully protect against beam weaponry, thus it is better to increase the mobile suit's mobility by weight reduction rather than equip more armor which would lead to a higher weight and lower mobility.The mobile suit also has what had become the standard 360-degree panoramic screen and linear seat fitted in a circular cockpit that also functions as an escape pod. The multiple panels of the panoramic screen make up a single 360-degree display, covering the entire inner surface of the cockpit. The image displayed on this screen is a computer simulation constructed from the cameras distributed around the mobile suit's exterior. The viewpoint is that of the mobile suit's head, and the image is carefully edited to remove the mobile suit itself. The linear seat is suspended in the center of the cockpit, supported by a linear arm which electromagnetically counters G-forces and impact shocks in order to protect the pilot. Together, the panoramic screen and the linear seat gives the pilot a larger field of view and eliminates blind spots.The most notable flaw of the Gundam Mk-II is that it is armored using the obsolete titanium alloy ceramic composite. Another flaw is that the movable frame's leg sections have rigidity issues associated with the strength of the structural material used, and this problem persisted even after six design revisions. Despite this, for a brief time period, the Gundam Mk-II's movable frame makes it one of the most agile mobile suits available. Three Gundam Mk-II were produced in total. They were later stolen by the Anti-Earth Union Group (AEUG) and given a new paint scheme. Despite being used by two different factions, the Gundam Mk-II's weaponry remains mostly unchanged. Its only fixed weapons are two beam sabers, but it can carry a vulcan pod, a shield, a beam rifle, a hyper bazooka and a clay bazooka if necessary.

The RX-0 Full Armor Unicorn Gundam (aka Full Armor Unicorn, Unicorn) is the RX-0 Unicorn Gundam equipped with an array of weapons. It is piloted by Banagher Links. The Full Armor Unicorn Gundam was an enhancement plan devised by Takuya Irei while aboard the Nahel Argama and is based on his extensive knowledge of mobile suits. After Banagher's Newtype potential manifests itself, the psycoframe changes color to a vibrant green. Unlike other mobile suits with the Full Armor designation, the FA Unicorn does not have any additional armor for the MS itself (except additional shields). However, it does introduce a large array of weapons, which are added to the legs, backpack and forearms.The new array of weapons includes two backpack-mounted hyper bazookas, numerous hand grenades, two grenade launchers, two missile pods, three pair of Gatling guns, and two additional shields, one on the backpack and the other on the right forearm. The backpack also features two boosters taken from a Base Jabber Type 94 to compensate for the increased mass, with one of the additional shields situated between them. Thanks to its large amount of armament, the Full Armor Unicorn Gundam can handle any combat situations, and all the added weaponry can be ejected whenever their ammunitions are spent to avoid becoming dead-weight. Like the normal Unicorn, the Full Armor Unicorn can take control of an enemy's psycommu weapons, even Quasi-Psycommu bits, when the NT-D is activated. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The MSM-07S Z'Gok Commander Type is a variant of the MSM-07 Z'Gok created by the Principality of Zeon during the One Year War. An improved, higher performance model of the Z'Gok, it has higher reactor output, better maneuverability and a change in armor materials. It eventually became the standard Z'Gok model.

The RX-0 Unicorn Gundam (ユニコーン ガンダム Yunikōn Gandamu?, or Unicorn, Unicorn Gundam 01, Singularity One) is the titular prototype mobile suit of the Mobile Suit Gundam Unicorn novel, its OVA adaptation and the television re-cut. Developed by Anaheim Electronics for the Earth Federation, it concealed a secret that could shake the future of all humanity, for it was the key to opening Laplace's Box. It is piloted by Banagher Links after the head of the Vist Foundation and his father, Cardeas Vist, entrusted it to him at the dawn of the Third Neo Zeon War in U.C. 0096.Produced as the final part of the E.F.S.F's reorganization plan, the "UC Project", the Unicorn Gundam is a revolutionary design meant to be the main symbol of the project's main goal: to destroy any traces of Zeonism in the Earth Sphere. Thus, not only does it feature a Gundam design, but it also incorporates an anti-Newtype system. Two prototype machines were completed at Anaheim Electronics' factory in Granada. However, when the Vist Foundation took control of the project, they installed a special "La+ Program" OS into the Gundam, turning it into a symbol of possibility by making it the key to finding Laplace's Box: the embodied hope of the Universal Century. Featuring the most advanced mobile suit technology of the time, its performance is unmatched.Incorporating test data from the experimental MSN-06S Sinanju Stein, the Unicorn Gundam's entire frame is built with Psycho-Frame material, drastically increasing the unit's responsiveness and allowing it to be piloted like an extension of the pilot's body. While mobile suits used during the Second Neo Zeon War implemented psycho-frame technology on a limited basis, the Unicorn is the first "full psycho-frame" mobile suit. In some cases, this responsiveness is so high that the machine appears to act on its own without any actions from the pilot. In addition, the Unicorn utilizes a special system known as the "NT-D" (or Newtype Destroyer) which activates the suit's psycho-frame and dramatically increases the suit's performance.In its normal form, the "Unicorn Mode", the Unicorn Gundam's head is similar in appearance to those of Londo Bell's mass-produced mobile suits, with the addition of a single, horn-like antenna on its forehead (which gives it the name "Unicorn"). Destroy Mode is the form when Unicorn Gundam's NT-D System is activated. The transformation is marked by an expansion of the suit's frame. The armor seams separate and lock down into various hard-points, while the newly exposed psycho-frame emits a pinkish-red or greenish (Awakened) glow (attributed to the Psycho-Field phenomenon). In this mode, the Unicorn becomes taller, reveal six more thrusters, and its head transforms to one with standard Gundam features, the visor and face guard retracts into the head to reveal the twin eyes and mouth plate, and the antenna splitting into a V-fin. To prevent its transformation being interrupted, the strength of its I-Field will be increased temporarily. Additionally, a pair of sub-sensors are revealed on the shoulders, and two concealed beam sabers extend out of the backpack.In Destroy Mode, the suit's psycho-frame scans the pilot's thoughts and directly transmits them to the suit's drive system; in other words, the Unicorn can be controlled by the pilot's thoughts alone. Additionally, the mode also causes the machine's performance - in thrust, generator output, and sensory radius - to be increased to unmeasurable levels. The NT-D also allows the Unicorn to take control of an enemy's psycommu weapons (also known as "Psycommu Jack") by emitting a Psycho-Field. However, the stress placed on the mind by manipulating an object more than tenfold the size of an average human is extraordinary. Even with the aid of the psycho-frame, the pilot's mind can only endure roughly five minutes of operation before a limiter is activated, deactivating the psycho-frame and returning the mobile suit to its Unicorn Mode.With the performance limiters disengaged, the Unicorn can accelerate up to 20 G's in Destroy Mode; to alleviate such high levels of G forces placed on the pilot, a drug administration system called the "DDS" is fitted on the pilot suit. It suppresses stagnated blood circulation due to high acceleration by administering the drug to the pilot. Furthermore, the DDS activates automatically upon the detection of another Newtype via the "Intention Automatic System".

The ZGMF-1017 GINN is a mass-produced general purpose mobile suit introduced in the anime series Mobile Suit Gundam SEED. ZAFT's first official mass-production mobile suit, the GINN was developed by the Heinlein Design Bureau, one of PLANT's state-run military design bureaus. It boasted higher versatility and expandability than its predecessor, the YMF-01B Proto GINN, and was capable of using a wide variety of weapons. While the GINN inherited much of its design from the Proto GINN, its mobility and maneuverability were greatly improved thanks to enhanced thrusters, including a pair of large backpack thrusters. Although classified as a Zero Gravity Maneuver Fighter, the GINN could function both in space and on Earth.In addition to the head-mounted mono-eye, which served as the mobile suit's main camera, the GINN featured a crest-shaped multi-functional sensor array with a camera at its base (with a LLLTV function), allowing the pilot to gather battlefield information in real time. This system would later be used by many ZAFT mobile suits developed between C.E. 70 and C.E. 71. Another notable feature of the GINN was that it had several hardpoints for mounting or storing its weapons, located on the left, right and back of the waist, as well as on the side of its legs.Most of the GINN's weapons were designed to combat the OMNI Enforcer's mobile armors, including its main weapons, the 76mm heavy assault machine gun and the heavy blade. To adapt to various battlefield situations and combat requirements, such as anti-ship combat or fortress assault, a wide range of optional weapons were developed for the GINN. Among them was the D-type (meaning "destruction") equipment, the heaviest of GINN's weapons, designed for anti-fortification operations.The combat abilities of one GINN was said to be equivalent to that of three to five TS-MA2 Moebius mobile armors used by the OMNI Enforcer, and it could single-handedly destroy an enemy escort ship. This led to the ZAFT gaining an upper hand in the early stages of the war. Due to the GINN's excellent versatility and expandability, many variants were developed and deployed, such as the ZGMF-1017M GINN High Maneuver Type tuned for ace pilots, and the ZGMF-LRR704B GINN Long Range Reconnaissance Type for reconnaissance. Additionally, there are GINN units customized to suit their pilots, such as the ZGMF-1017 Miguel's GINN.

The XXXG-01S Shenlong Gundam (aka Shenlong, Nataku, or Gundam Zero-Five) is mobile suit featured in the manga Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers and was piloted by Chang Wufei. The Shenlong Gundam is built by Master O of the L5 Colonies. Reflecting the philosophy of Master O who specializes in machine's drive systems, the Shenlong excels in close combat and has high agility. For this reason, it has the highest level of fighting ability out of the five Gundams, with its joints' range of motion enough to reproduce Chinese martial arts. Its primary armament consisted of head-mounted vulcans, a Chinese-style "Beam Trident", a shield on the left arm, and a Chinese inspired "Dragon Fang" on the right forearm.

The OZ-00MS Tallgeese Flügel is a variation of the OZ-00MS Tallgeese appearing in New Mobile Report Gundam Wing Endless Waltz: The Glory of Losers. The Tallgeese Flugel is a variant of the OZ-00MS Tallgeese created by Mike Howard, who has outfitted it for space use. The original back-mounted thruster units are replaced by four angelic wing binders lined with many thrusters, granting the Tallgeese great speed and manoeuvrability in space. The two larger wings can function as shields when positioned in front of the suit.

The GF13-017NJII God Gundam (aka G Gundam, Burning Gundam in the English dub) is the titular Mobile Fighter of Mobile Fighter G Gundam. It was the second Mobile Fighter used by Neo Japan in the 13th Gundam Fight, and is piloted by Domon Kasshu. The successor of the GF13-017NJ Shining Gundam, the God Gundam was developed by Dr. Mikamura almost single-handedly and customized for Domon Kasshu. Even in Normal Mode, its power surpassed that of the Shining Gundam's Super Mode. In addition, it could achieve an even more powerful state called Hyper Mode.Its chest was equipped with the Energy Multiplier System, a unique system that allows energy to be refined in a similar manner to Qi. When piloted by Domon, the King of Heart emblem would appear upon it. It was part of a larger system called the Artificial Aura Generator. The six Core Lander wings on its back (which were named "Dream", "Illusion", "Bubble", "Shadow", "Dew", and "Lightning", after a passage from the Diamond Sutra) and the two short antennas on its head serve as magnetic field generating devices, while the two long antennas function as intelligence-gathering devices. When Hyper Mode is activated, the Energy Multiplier opens up, the six wings deploy, and a ring of light appears on the God Gundam's back, coating it in a magnetic field that improves its mobility through a full-body magnet coating.The God Gundam was armed with a pair of head-mounted vulcan guns, a pair of 3-barrel machine cannons mounted on the upper chest, and a pair of beam swords known as "God Slash". In Hyper Mode, it was capable of using a finisher move known as Bakunetsu God Finger, a refined and more powerful version of Shining Finger. Its forearms were covered in armor known as "G Knuckles" or "God Finger Protectors", which were based on the finishing move of Neo Albania's Gundam Fighter during the 12th Gundam Fight.

The MVF-X08 Eclipse Gundam (MVF-X08 エクリプスガンダム?) is a custom-made Mobile Suit from the Mobile Suit Gundam SEED Eclipse manga. It was piloted by Tatsumi Hori for the Orb Disaster Relief Team.A custom Mobile Suit developed in secret by Orb. Its most prominent feature was its ability to transform from a flight form to an MS form. It was equipped with a Mirage Colloid function, and was armed with functions specialized for the ODR, an organization that excelled in covert operations. Two units have been confirmed to exist.The MVF-X01 Eclipse was also developed with the aim of giving an MS the functions of a supersonic fighter capable of operating at ultra-high speeds, high altitudes and cruising extremely long-distances. Unlike the MVF-M11C Murasame, which was also a transformable aerial combat MS developed by Orb to defend territorial waters and airspace, the Eclipse had capabilities that allowed it to attack enemy bases. Although these Mobile Suits have similar model numbers, they are machines created with different design philosophies.Eclipse is a special mobile suit that it places burden on a bodily-inexperienced pilot, as revealed in chapter 12 Gundam Seed Eclipse manga, where Tatsumi Hori spilled his blood from his mouth as he couldn't take the attack pressure from both Ginn Gladiator and Aile Calamity Gundam.

The MG 1/100 ASW-G-08 Gundam Barbatos from the acclaimed Mobile Suit Gundam: Iron-Blooded Orphans series is a masterpiece of engineering and detail. This Bandai Master Grade model kit delivers exceptional articulation and stunning accuracy, making it a must-have for collectors and Gunpla enthusiasts alike. Designed for advanced builders, the kit includes a full internal frame that captures the mechanical aesthetic of the Barbatos, while also allowing dynamic poses. The set includes Barbatos' iconic weapons: the mace, sword, and long-range cannon, ensuring a fully immersive building and display experience. Note that Bandai provides high-quality stickers for markings; water-slide decals are not included. Perfect for fans of Iron-Blooded Orphans and modelers seeking a challenge, this MG Barbatos stands out as a centerpiece in any Gunpla collection. Elevate your Gunpla experience with this faithful recreation of the ASW-G-08 Gundam Barbatos—showcasing Bandai's renowned craftsmanship and attention to detail.

The XXXG-01D2 Gundam Deathscythe Hell (aka Deathscythe Hell, or Gundam Zero-Two) is the upgraded version of XXXG-01D Gundam Deathscythe in Mobile Suit Gundam Wing. It is piloted by Duo Maxwell. An updated version of the XXXG-01D Gundam Deathscythe that was destroyed by OZ, the Deathscythe Hell is better adapted for space combat. Like its predecessor, the Deathscythe Hell specializes in stealth and close combat. The new active cloak mounted on the shoulders improve the suit's defense when closed, and can withstand multiple beam cannon shots from OZ's OZ-02MD Virgo. Furthermore, it also allows the suit to become invisible. When opened, the active cloak enhances the Gundam's mobility. One of Duo Maxwell's favorite strategies is to use the Gundam's enhanced hyper jammers and its invisibility to sneak close to enemy units and catch them unawares. This tactic is usually good for taking out at least one or two enemy units, after which Duo will uncloak the Gundam.Deathscythe Hell's primary weapon is a Twin Beam Scythe, an upgraded version of its predecessor's Beam Scythe, and it is equipped with a second beam scythe blade and a small rocket engine on the end, giving it a greater reach and power. The Deathscythe Hell's secondary weapon is a Buster Shield on the left forearm which can be deployed as a projectile weapon. Like the original Deathscythe's, this buster shield can also emit a beam blade. Lastly, the Deathscythe Hell retained the Deathscythe's head-mounted vulcan guns, but the clavicle-mounted machine guns were removed.