Most Popular

The Bandai MG 1/100 MS-09 Dom is a Master Grade model kit from the original Mobile Suit Gundam series, featuring the Principality of Zeon's mass-produced ground combat mobile suit at 1/100 scale. This 2022 release is effectively a Ver. 1.5 upgrade of the original MG Dom mold, incorporating redesigned joint parts from the MG Dwadge for improved articulation and posability. Recommended for intermediate to advanced builders familiar with inner frame construction, this kit snaps together without glue or paint. The MS-09 Dom is best known as the signature mobile suit of the Black Tri-Stars - Gaia, Ortega, and Mash - and played a pivotal role during the One Year War.Key Features Upgraded 2022 Mold: Features remolded heat saber hilt for better storage stability and a redesigned upper leg frame for improved articulation over the original MG Dom. Forward Shoulder Swing Mechanism: New shoulder-to-torso connection allows a forward swing for more natural weapon-holding poses. Modified Ankle Frame: Internal ankle frame has been redesigned to recreate the Dom's iconic crouched hovering pose from the anime. Poseable Mono-Eye: The mono-eye sensor can move left, right, or upward behind a clear shield piece. Fully Articulated Hands: Poseable fingers with molded and flip-out tab-holes for stable weapon handling. Opening Cockpit: Stomach panel flips down to reveal the cockpit hatch and includes a 1/100 scale Black Tri-Stars pilot figurine. Water Slide Decals: Includes a water slide decal sheet for detailed markings. Included Equipment and Accessories MS-09 Dom Heat Saber Giant Bazooka Raketen Bazooka Ver.8 Machine Gun 2 Strum Fausts (with handle and grid fin options) 2 Adapters for Strum Faust 2 Machine Gun Ammo Racks 1/100 Black Tri-Stars Figurine (sitting) 1/100 Black Tri-Stars Figurine (standing) Water Slide Decals Instruction Manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam Line Master Grade (MG) Scale 1/100 Model Number MS-09 Mobile Suit Name Dom Pilot(s) Black Tri-Stars (Gaia, Ortega, Mash) Number of Runners 23 Total Parts 230 Material PS, PE, ABS, PP Bandai SKU 2515194 UPC 4573102621719 Product Type Snap-fit Plastic Model Kit Country of Origin Japan Release Date February 2022

The Bandai Pokemon Plamo Collection Quick!! #06 Piplup is a beginner-friendly snap-fit plastic model kit from the Pokemon Plamo Quick!! series by Bandai Spirits. This adorable Water-type starter Pokemon from the Sinnoh region is captured in a charming fixed sitting pose at approximately 75mm in total length. With only 12 pre-colored parts and tool-free touch gate assembly, this kit is ideal for first-time builders and younger hobbyists. Piplup first appeared in Pokemon Diamond and Pearl and has remained one of the most beloved starter Pokemon in the franchise.Key Features Beginner-Friendly Assembly: Only 12 pre-colored parts that snap together without tools, glue, or paint Touch Gate System: Parts detach from runners by hand - no nippers or cutting tools required Pre-Colored Parts: Color-separated molding delivers a vibrant, accurate Piplup right out of the box Fixed Pose Display: Completed model features a cute sitting pose at approximately 75mm total length Foil Sticker Sheet: Included foil stickers add finishing details such as eye highlights Quick Build: Part of the Pokemon Plamo Quick!! series designed for fast, relaxing assembly sessions Included Equipment and Accessories 12 pre-colored plastic parts (runners) Foil sticker sheet x 1 Assembly instruction manual Specifications Brand Bandai Spirits Series Pokemon Line Pokemon Plamo Collection Quick!! Kit Number 06 Scale Non-scale Character Piplup (Pochama) Approximate Length 75mm Number of Parts 12 Bandai SKU 5061573 UPC 4573102615732 Product Type Snap-fit Plastic Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date April 2021

The Bandai HGTWFM #10 1/144 Expansion Parts Set for Demi Trainer is an add-on accessory kit from Mobile Suit Gundam: The Witch from Mercury. This set provides a wide array of interchangeable weapons and equipment for customizing the HGTWFM Demi Trainer and other compatible kits from the Witch from Mercury HG line. As a snap-fit PS plastic accessory set, it is suitable for beginner to intermediate builders. The Demi Trainer is the standard training mobile suit used by students at the Asticassia School of Technology in the series.Key Features Modular Daedalus Weapon System: The Daedalus weapon core can be built with the drill, circular saw, gatling barrel, or quad-barreled missile launcher, creating up to 5 official weapon combinations. Configurable Beam Rifle: The rifle core can be assembled as either a large beam rifle with scope unit or a gatling gun with ammo belt feed. Arm-Mounted Weaponry: Large armaments can be mounted directly onto the Demi Trainer using the included arm unit and joint parts. Close Combat Options: Includes a combat knife that can mount onto forearms via an adapter for melee loadouts. Open Hand Parts: A pair of flat open hand parts (left and right) are included for expanded posing with the Demi Trainer. Cross-Kit Compatibility: Weapons can be wielded by the HG Demi Trainer and other HGTWFM kits including Chuchu's Demi Trainer and Demi Barding. Included Equipment and Accessories Beam Rifle x 1 Gatling x 1 Belt Feeding Belt x 1 Combat Knife x 1 Circular Saw Parts x 1 Drill Parts x 1 Missile Launcher Parts x 1 Open Hand Parts (left and right) x 1 pair Joint Parts x 1 set Instruction Manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam: The Witch from Mercury Line High Grade the Witch from Mercury (HGTWFM) Kit Number #10 Scale 1/144 Product Type Expansion Parts Set Compatible Kits HGTWFM Demi Trainer, Chuchu's Demi Trainer, and other HGTWFM kits Bandai SKU 5063357 UPC 4573102633576 Material PS (Polystyrene) Country of Origin Japan Release Date December 2022

The Bandai Pokemon Plamo Collection Quick!! #14 Tepig is a beginner-friendly snap-fit plastic model kit from the Pokemon Plamo Collection Quick!! series by Bandai Spirits. This kit recreates the beloved Fire-type starter Pokemon from the Unova region using multi-color molded parts that faithfully capture Tepig's distinctive appearance. The kit is designed for builders of all ages and skill levels, requiring no tools, glue, or paint to complete. Tepig first appeared in Pokemon Black and White as one of the three starter Pokemon available to trainers in the Unova region.Key Features Tool-Free Snap-Fit Assembly: Parts can be removed from runners and assembled entirely by hand with no tools, glue, or paint required. Pre-Colored Multi-Color Parts: Runners feature multi-color molding technology to accurately reproduce Tepig's orange, black, and yellow color scheme straight out of the box. 20-Piece Construction: Simple 20-part assembly makes this an ideal entry point for first-time model builders and younger Pokemon fans. Sticker Decals Included: Stickers are provided for Tepig's eyes and markings to add finishing detail to the completed model. Display-Ready Design: The completed figure measures approximately 82mm (3.2 inches) in length and features Tepig in a charming standing pose. Part of a Collectible Series: Number 14 in the Pokemon Plamo Collection Quick!! lineup, which includes fan-favorite Pokemon like Pikachu, Eevee, and Charmander. Included Equipment and Accessories Pre-colored plastic runner(s) - Tepig parts (20 pieces) Sticker sheet (eyes and markings) Assembly instruction manual Specifications Brand Bandai Spirits Series Pokemon Line Pokemon Plamo Collection Quick!! Kit Number 14 Scale Non-scale Character Tepig Assembled Length Approximately 82mm (3.2 in) Number of Parts 20 Bandai SKU 5065318 UPC/JAN 4573102653185 Product Type Snap-fit Plastic Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date May 2023

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

The Bandai SD Sangoku Soketsuden #28 BUG & BuDuiBing Set is a non-scale SD model kit from the SD Gundam World Sangoku Soketsuden line, a Romance of the Three Kingdoms-themed Gundam series. This selective assembly kit allows builders to construct two figures representing the common foot soldiers and BUG units of the Sangoku Soketsuden storyline, with five interchangeable faceplates covering the Shu, Wei, Wu, Luoyang, and BUG factions. As an SD-grade snap-fit kit with a simple structure, it is suitable for beginners and younger builders ages 8 and up. The line was introduced in 2019 as part of Gundam's 40th Anniversary celebration.Key Features Selective Assembly: Builds two figures that can be configured into any 2 of 4 troop types (Shu, Wei, Wu, Luoyang) or BUG units 5 Interchangeable Faceplates: Reversible head structure allows swapping between Shu, Wei, Wu, Luoyang, and BUG faceplates for faction customization Beam Flags: Paper beam flags for all three main kingdoms (Shu, Wei, Wu) are reproduced from the instruction manual Weapon Loadout: Includes a carbine lance and sword as mass-produced armaments for the troop soldiers Compatibility: Features a common backpack mounting hole for customization and is compatible with the SDSS Trinity Bike (sold separately) and Action Base stands (sold separately) Snap-Fit Assembly: Simple structure with no glue or painting required for basic assembly, though painting is recommended to achieve individual faction color schemes as runners are molded entirely in black Included Equipment and Accessories BUG & BuDuiBing main body (builds 2 figures) 5 Interchangeable faceplates (Shu, Wei, Wu, Luoyang, BUG) Carbine lance x1 Sword x1 3 Beam flags (paper, from instruction manual) Foil seal sheet x1 Specifications Brand Bandai Spirits Series SD Gundam World Sangoku Soketsuden Line SD Sangoku Soketsuden Kit Number #28 Scale Non-scale Character BUG & BuDuiBing (Troop Soldier) Approximate Height ~4 inches (~10 cm) Bandai SKU BAS2491890 UPC 4573102588562 Product Type Unpainted assembly plastic model kit Material PS (injection plastic) Country of Origin China Release Date November 2019 (initial); January 2021 (Japan retail)

The Bandai MG 1/100 GN-0000GNHW/7SG 00 Gundam Seven Sword/G is a Master Grade kit based on the upgraded close combat variant of the 00 Gundam from Mobile Suit Gundam 00V: Battlefield Record. Armed with a full arsenal of seven bladed weapons plus the GN Sword II Blaster, this kit features extensive weapon gimmicks, clear GN effect parts, and LED unit compatibility. Recommended for intermediate to advanced builders due to its detailed inner frame construction and large number of accessories, this MG delivers a highly articulated and weapon-laden display piece.Key Features Full Seven Sword Arsenal: Includes all seven close combat weapons - GN Buster Sword II, GN Sword II Long, GN Sword II Short, two GN Katars, and two GN Beam Sabers - plus the GN Sword II Blaster LED Unit Compatibility: The GN Buster Sword II, chest, and GN Drives can accommodate LED units (sold separately) for light-up effects Weapon Transformation Gimmicks: GN Buster Sword II converts between shield and sword modes, GN Sword II Long and Short feature mode-switching capabilities, and GN Katars can combine into a twin-edge weapon Clear GN Effect Parts: Translucent green parts reproduce GN particle effects on weapons and GN Condensers throughout the mobile suit Unique Seven Sword Components: Includes exclusive kneecap armor parts designed specifically for mounting the GN Katars Highly Articulated Inner Frame: Full MG-grade internal skeleton provides extensive poseability for dynamic weapon displays Pilot Figures Included: Comes with 1/100 scale Setsuna F. Seiei pilot figures in both standing and sitting poses Included Equipment and Accessories GN-0000GNHW/7SG 00 Gundam Seven Sword/G mobile suit GN Sword II Blaster GN Buster Sword II GN Sword II Long GN Sword II Short GN Katar x2 GN Beam Saber x2 Seven Sword kneecap armor parts Clear GN effect parts 1/100 Setsuna F. Seiei pilot figure (standing) 1/100 Setsuna F. Seiei pilot figure (sitting) Foil seal sheet Gundam decal sheet Wire Assembly instructions Specifications Brand Bandai Spirits Series Mobile Suit Gundam 00V: Battlefield Record Line Master Grade (MG) Scale 1/100 Model Number GN-0000GNHW/7SG Mobile Suit Name 00 Gundam Seven Sword/G Pilot Setsuna F. Seiei Faction Celestial Being Bandai SKU 2125945 / 5063083 UPC 4573102630834 Product Type Model Kit Material PS, PE, Clear PS Country of Origin Japan Release Date September 2011

The Bandai SD BB Senshi #288 ZGMF-X20A Strike Freedom Gundam is a non-scale, super-deformed plastic model kit based on the lead mobile suit from Mobile Suit Gundam SEED Destiny. This kit features gold-colored polycaps and bright foil stickers that bring the Strike Freedom's iconic appearance to life in an adorable chibi form. As a snap-fit SD kit with pre-colored parts, it is ideal for beginners or experienced builders looking for a quick, fun project. Originally released in March 2006, it represents the ZGMF-X20A as piloted by Kira Yamato in the Cosmic Era timeline.Key Features Gold-Colored Polycaps: Special gold-colored polycaps add detail and visual appeal unique to this kit Combinable Beam Rifles: Two beam rifles that can combine to form a long rifle, replicating the mobile suit's signature weapon configuration Movable Wing Sections: Articulated wings that can be deployed to replicate the Voiture Lumiere system's HiMAT Mode Deployable Railguns: Reproduces the deployment of the hip-mounted railguns from the anime Foil Stickers: Bright foil sticker sheet included for enhanced color detail right out of the box Snap-Fit Assembly: Pre-colored parts snap together without the need for glue or paint Display Stand Included: Comes with a display stand for aerial posing Included Equipment and Accessories Strike Freedom Gundam SD body 2 x Beam Rifle (combinable into Long Rifle) Beam Saber Beam Shield Movable Wing units Display Stand Foil Sticker sheet Instruction manual (Japanese) Specifications Brand Bandai Series Mobile Suit Gundam SEED Destiny Line SD Gundam BB Senshi Kit Number 288 Scale Non-scale (Super Deformed) Model Number ZGMF-X20A Mobile Suit Name Strike Freedom Gundam Pilot Kira Yamato Bandai SKU 5060410 (BAS1141040) UPC 4573102604101 Product Type Model Kit Material PS, PE Runners 5 (A1, A2, B1, B2, PC123+) - 83 pieces Country of Origin Japan Release Date March 2006

The Bandai HGGBB #03 1/144 ZGMF-X20A-PF Gundam Perfect Strike Freedom is a High Grade Gundam Breaker Battlogue kit based on the custom Gunpla from the Gundam Breaker Battlogue anime series. This unique design fuses the ZGMF-X20A Strike Freedom Gundam with the equipment of the GAT-X105 Perfect Strike Gundam, resulting in a heavily armed mobile suit featuring both DRAGOON wings and the Super Multiple Assault Striker backpack. Suitable for beginner to intermediate builders, the kit is snap-fit assembly with no glue or painting required. The Gundam Perfect Strike Freedom is piloted by Sana Miyama in the Gundam Breaker Battlogue ONA.Key Features Hybrid Gunpla Design: Combines elements of the Strike Freedom Gundam and the Perfect Strike Gundam into one heavily armed mobile suit. Super Multiple Assault Striker: Massive backpack unit integrates 8 detachable Super DRAGOON mobile weapon wings with an Aile Striker-style silhouette. Combinable Armaments: The "Schwert Gewehr" anti-ship laser sword and "Agni" hyper impulse cannon can be separated or combined to form the Super Schwert Gewehr and Super Agni. Beam Effect Parts: Includes clear beam effect parts for the beam shield and beam sabers for dynamic display options. Rocket Anchor Wire Gimmick: The Panzer Eisen rocket anchor can be displayed in a launched state using the included lead wire. HGGBB Cross-Compatibility: Shared attachment points across the HGGBB lineup allow parts swapping and customization with other kits in the series. Double-Jointed Articulation: Features double-jointed elbows and knees, ball-and-socket joints throughout, and pivoting waist armor for wide posability. Included Equipment and Accessories Gundam Perfect Strike Freedom "Schwert Gewehr" anti-ship laser sword "Agni" hyper impulse cannon 8x Super DRAGOON mobile weapon wings Rocket anchor wire (PVC lead wire) Beam effect parts (beam saber / beam shield) Manipulators - weapon-holding (1 pair) Manipulators - open-palm (1 pair) Foil seal sheet Instruction manual Specifications Brand Bandai Spirits Series Gundam Breaker Battlogue Line High Grade Gundam Breaker Battlogue (HGGBB) Kit Number 03 Scale 1/144 Model Number ZGMF-X20A-PF Mobile Suit Name Gundam Perfect Strike Freedom Pilot Sana Miyama Bandai SKU 2555018 UPC 4573102620262 Product Type Model Kit Material PS, PE, PVC (Wire) Country of Origin Japan Release Date December 2021

Overview The HeMoXian 1/10 Over Zero Boxer BAKI Overdrive is a plastic model kit from HeMoXian's original Over Zero series, standing approximately 19 cm tall when assembled. The Overdrive edition presents BAKI, the series' brawler-type cyborg, in a white-and-purple color scheme with a combat loadout built around twin drill arm attachments and a pair of Butter Knife MK3 blades. HeMoXian is a Chinese manufacturer whose Over Zero line uses soft-rubber TPE components to simulate muscle deformation during posing, a technology that debuted with the original Boxer BAKI release. Key Features White-and-Purple Overdrive Colorway: A distinct scheme from the standard Boxer BAKI release. TPE Musculature: Flexible TPE sections on the exposed-muscle body deform as the figure is posed. Interchangeable Drill Arms: Two drill arm attachments swap with the standard forearms. Twin Butter Knife MK3 Blades: A matched pair of hand-held blades for dual-wield poses. Four Pairs of Interchangeable Hands: Gripping and expressive hand sets for weapon and unarmed poses. Flexible Wire Details: Purple and white wires add conduit and hair detail around the body. Over Zero Cross-Compatibility: Over Zero kits are designed to share equipment, so weapons from other releases in the line can be mounted. Builder Context The BAKI Overdrive suits intermediate builders. Assembly is snap-fit with no cement required, and the builder applies the waterslide decals. At 1/10 scale and roughly 19 cm tall, the finished figure is close in height to a Bandai Master Grade 1/100 kit. Its exposed-musculature design and TPE parts build differently from a conventional Gundam inner frame. Why Build This Kit The HeMoXian Over Zero Boxer BAKI Overdrive uses the same BAKI base body and TPE musculature as the full Boxer BAKI release, packaged with a focused loadout: two drill arms, two Butter Knife MK3 blades, four pairs of hands, and flexible wire details. It leaves out the full release's training robot, champion belt, Rock Crack gauntlets, ring outfit, and display base, and builds from 27 runners compared with 51 in the full kit. The white-and-purple scheme gives existing Boxer BAKI owners a visually distinct second figure rather than a duplicate. At about 19 cm, BAKI Overdrive stands close to the height of a Bandai MG 1/100 kit, so it displays alongside Master Grade collections without looking out of scale. No display base is included. Standard polystyrene plastic cement does not bond TPE, so modifying the musculature sections requires a different adhesive. Box Contents Parts to build BAKI (Overdrive Ver.) Drill arm attachments x2 Standard forearms x2 Butter Knife MK3 blades x2 Interchangeable hands x4 pairs Purple flexible wire White flexible wire Waterslide decal sheet Instruction manual Specifications Brand HeMoXian Series Over Zero Model Boxer BAKI (Overdrive Ver.) Manufacturer Code HMX2025006OD Scale 1/10 Height Approx. 19 cm Runners 27 Materials ABS, PS, TPE Colorway White and purple Assembly Snap-fit, no cement required Markings Waterslide decals EAN 6976038440399 Type Plastic model kit

The Bandai Figure-Rise Standard Miorine Rembran is a non-scale character model kit from Mobile Suit Gundam: The Witch from Mercury. This kit faithfully recreates Miorine's distinctive design with intricate parts separation for color-accurate uniform detail, three-dimensional sculpted hair with movable back sections, and tampo-printed facial expressions. Suitable for beginner to intermediate builders, the kit is snap-fit and does not require glue or paint for a finished look. Miorine is the deuteragonist of The Witch from Mercury, daughter of Benerit Group President Delling Rembran, and co-founder of GUND-ARM Inc. alongside Suletta Mercury.Key Features Three Interchangeable Facial Expressions: Includes one tampo-printed default face and two blank face parts that can be customized using the included waterslide decals for eyes and eyebrows Movable Sculpted Hairstyle: Miorine's signature hairstyle is recreated in three dimensions with a movable back hair section that accommodates action base mounting Color-Separated Uniform: The Asticassia School of Technology uniform is reproduced through parts division, with shoulder and chest markings applied via stickers Wide Range of Articulation: Leg joints provide a broad range of motion while maintaining a natural silhouette, with ball-joint head, rotating torso, and bendable elbows and knees Interchangeable Hand and Foot Parts: Three pairs of hand parts including fists and open palms, plus barefoot parts for alternate display options Signature Accessories: Includes Miorine's iconic watering can and hand shovel from her greenhouse scenes Included Display Base: Comes with an Action Base 6 for supported posing and display Included Equipment and Accessories Miorine Rembran figure parts 3x Interchangeable facial expressions (1 tampo-printed, 2 blank for waterslide decals) 3x Pairs of interchangeable hands 1x Pair of barefoot parts (left and right) 1x Watering can 1x Shovel Sticker sheet Water transfer expression decal sheet Action Base 6 Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam: The Witch from Mercury Line Figure-Rise Standard Scale Non-scale Character Miorine Rembran Bandai SKU 5064009 UPC 4573102640093 Product Type Character Model Kit Material PS, ABS Runner Count 6 Total Piece Count 120 Country of Origin Japan Release Date November 2022

The Bandai RG #21 1/144 GNT-0000 00 Qan[T] is a Real Grade model kit of the iconic mobile suit from Mobile Suit Gundam 00 The Movie - A Wakening of the Trailblazer. This kit faithfully reproduces the 00 Qan[T]'s GN Drive attachment and detachment mechanisms, GN Shield deployment via an articulated arm mount, and the full recombination gimmick of its signature GN Sword Bits. As an intermediate-level Real Grade build with small parts and detailed inner frame construction, it is best suited for builders with some prior Gunpla experience. Piloted by Setsuna F. Seiei, the 00 Qan[T] is the fifth-generation successor to the 00 Raiser and one of the most powerful mobile suits in the Anno Domini timeline.Key Features Advanced MS Joint Inner Frame: Utilizes the same type of advanced MS joint as the RG Gundam Exia, with new molds for the arms and GN capacitors throughout the body. GN Sword V with Mode Conversion: The GN Sword V can be recombined with GN Sword Bits into Buster Sword Mode and Buster Rifle Mode. GN Drive Gimmick: Realistic GN Drive attachment and detachment mechanism is fully reproduced. GN Shield Deployment: The GN Shield deploys via an articulated arm mount for accurate posing. Extensive Articulation: Features wrist modifications allowing the sword to be held horizontally, double-jointed elbows up to 140 degrees, 360-degree waist rotation, and poseable skirt armor. Multiple Hand Options: Includes fists, poseable hands, multipurpose weapon-holding hands, and an open-palm left hand for expressive poses. Pilot Figurine and Display Stand: Comes with a 1/144 scale Setsuna F. Seiei figurine, a mini-stand for Buster Sword/Rifle mode display, and an Action Base adapter. Included Equipment and Accessories GNT-0000 00 Qan[T] mobile suit GN Sword V GN Sword Bits x6 (2 short, 2 medium, 2 large) Fists (1 pair) Poseable hands (1 pair) Multipurpose weapon-holding hands (1 pair) Open-palm hand (left) Mini-stand for Buster Sword/Rifle mode 1/144 Setsuna F. Seiei figurine Adapter for Action Base Stickers Instruction manual Specifications Brand Bandai Series Mobile Suit Gundam 00 The Movie - A Wakening of the Trailblazer Line Real Grade (RG) Kit Number #21 Scale 1/144 Model Number GNT-0000 Mobile Suit Name 00 Qan[T] Pilot Setsuna F. Seiei Bandai SKU 2336380 UPC 4573102616043 Product Type Snap-fit Plastic Model Kit Material PS, ABS, PP Runner Count 12 runners (270 parts) Release Date May 2016 Country of Origin Japan

The Bandai HGAW #118 1/144 GX-9900-DV Gundam X Divider is a High Grade After War kit based on the rebuilt Gundam X from the anime series After War Gundam X. After the original GX-9900 Gundam X sustained heavy damage, it was reconstructed aboard the Freeden and equipped with the Divider system in place of the Satellite Cannon, giving pilot Garrod Ran a versatile mobile suit with enhanced defensive and offensive capabilities. This is a beginner-to-intermediate level snap-fit kit that does not require glue or painting, though painting is recommended for full color accuracy on the Divider. Key Features Transformable Divider: The Divider shield opens and closes to replicate the Harmonica Cannon firing mode, and can be mounted on the backpack or held as a handheld shield Articulated Backpack: Energy tanks and thrusters on the backpack are fully movable for dynamic posing Full Weapon Loadout: Includes Beam Machine Gun, Hyper Bazooka, and two Large Beam Swords with dedicated beam effect parts Multiple Hand Options: Comes with a pair of general weapon-holding hands, a right trigger-finger hand, and a left open-palm hand Snap-Fit Assembly: Molded in PS and PE plastics with snap-fit construction requiring no glue Foil Stickers Included: Foil sticker sheet provided for color accents and sensor details Included Equipment and Accessories Divider (transformable shield/Harmonica Cannon) Beam Machine Gun Hyper Bazooka Large Beam Sword x2 Beam effect parts x2 Weapon-holding hands (1 pair) Right trigger-finger hand Left open-palm hand Foil sticker sheet Specifications Brand Bandai Spirits Series After War Gundam X Line HGAW (High Grade After War) Kit Number 118 Scale 1/144 Model Number GX-9900-DV Mobile Suit Name Gundam X Divider Pilot Garrod Ran Mechanical Designer Kunio Okawara Bandai SKU BAS2117229 UPC / JAN 4573102641168 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date December 2010

The Bandai 1/144 RX-78F00/E Gundam (EX-001 G.L.R.S.S. Feather Unit) is a snap-fit plastic model kit based on the mobile suit featured in Gundam: Next Universal Century, the original animation shown at the Gundam Next Future Pavilion during the Osaka-Kansai Expo. The kit stands approximately 125mm tall and reproduces the RX-78F00/E's distinctive G.L.R.S.S. (Gundam Leaping Recursive Spangle Swarm) Feather equipment using clear solar panel parts and articulated backpack arms. This is a beginner-friendly build with IROPLA multi-color molding for a paint-free finish and snap-fit construction requiring no glue. The RX-78F00/E is a renewable energy demonstration test machine distinguished from the original RX-78F00 by the omission of the rear head fin and shoulder sensor, and the use of single-piece thrusters. Key Features IROPLA Multi-Color Molding: Vibrant color separation achieved through Bandai's multi-color molding technology, requiring no painting for a finished appearance Clear Solar Panel Parts: The G.L.R.S.S. Feather Unit solar panels are molded in translucent plastic and can be displayed in open or folded configurations Dual Backpack Options: Includes parts to build both the standing statue version and the standard version of the backpack Beam Welding Gun: Newly designed weapon can be reconfigured between deployed and stored states, and mounts on the left forearm when stored Swappable Armor Parts: Removable and interchangeable armor sections allow switching between RX-78F00 and RX-78F00/E configurations Articulated Backpack Arms: Multi-jointed support arms for the Feather Unit allow flexible posing of the solar panel equipment Snap-Fit Assembly: No glue required for construction, with marking seals included for detail application Included Equipment and Accessories G.L.R.S.S. Feather Unit equipment (1 set) Armor parts (1 set) Shoulder replacement parts for standing statue reproduction (1 set) Beam Welding Gun (1 set) Beam Rifle (1) Shield (1) Beam Saber grip (2) Hand parts (1 set) Marking seal (1 sheet) Specifications Brand Bandai Spirits Series Gundam: Next Universal Century Line 1/144 Scale (Ungraded) Scale 1/144 Model Number RX-78F00/E Mobile Suit Name Gundam (EX-001 G.L.R.S.S. Feather Unit) Bandai SKU BAS2856816 UPC / JAN 4573102735836 Product Type Snap-fit Plastic Model Kit Material PS, PE Country of Origin Japan Release Date April 2025 (original); June 2026 (Next Universal Century reissue)

Overview The Mechanicore 1/100 MEC10-ARC ZMX-42 Firehawk Arctic Combat Mode is a limited-edition color variant of Mechanicore's flagship mecha model kit. This version features a light gray base color scheme with military blue and black accents, representing a polar combat configuration. The Firehawk's design draws heavily from the MSN-04II Nightingale and MSN-04 Sazabi lineage, reinterpreted as an original Mechanicore design with a hawk-inspired silhouette. The kit converts between two distinct configurations - Genesic Heavy Assault Type and MS Close Combat Type - each with significantly different proportions and profiles. Mechanicore is a Chinese third-party manufacturer known for extremely high part counts, integrated LED systems, metal parts, and build complexity that exceeds most commercially available plastic model kits. The Arctic Combat Mode is limited to 3,888 units worldwide. Key Features Dual Configuration: Converts between Genesic Heavy Assault Type (520mm shoulder width, heavy armor) and MS Close Combat Type (152mm shoulder width, streamlined profile) Integrated LED System: Built-in LED lighting effects powered via USB Type-C Metal Parts: Includes die-cast metal components alongside PS, PC, and POM plastic for structural rigidity and weight Arctic Combat Color Scheme: Light gray base with military blue and black accents, distinct from the original red version Included Armament: Beam Tomahawk, Grenade Launcher, Beam Saber x2, and light-type shield First-Batch Bonus: Includes a set of clear transparent body armor parts for alternate display options Builder Context The Firehawk is an advanced-level kit that requires glue, paint, and finishing supplies. Build complexity is substantially above Bandai PG kits and closer to high-end garage kit territory, with extensive parts fitting, LED wiring, and screw-based assembly. Builders should expect a long-duration project with careful dry-fitting required throughout. Why Build This Kit The Mechanicore 1/100 ZMX-42 Firehawk Arctic Combat Mode is one of the most ambitious plastic model kits available from any manufacturer, with dimensions (26 cm head height, 52 cm shoulder width in Heavy Assault mode) and a parts count that dwarf even Bandai's PG line. The dual-configuration system that transforms the kit between a massive heavy assault profile and a compact close-combat silhouette is a genuine engineering feature, not a marketing gimmick - the shoulder width difference alone is over 360mm between modes. For builders who want a Nightingale-inspired design without being locked into Bandai's limited kit options, the Firehawk is currently the most detailed alternative at any scale. The Arctic Combat variant is the version to choose for builders who prefer military-toned color schemes over the original red, though both versions share identical engineering. At its price point, the Firehawk competes with premium resin conversion kits but offers the advantage of being a complete, self-contained product with integrated LED lighting and metal reinforcement out of the box. Box Contents PS, PC, POM plastic runners Die-cast metal parts LED lighting system with USB Type-C power Screws and hardware Beam Tomahawk Grenade Launcher Beam Saber x2 Light-type shield Clear transparent body armor parts (first-batch bonus) Assembly instructions Specifications Brand Mechanicore Model Code MEC10-ARC Scale 1/100 Head Height (Heavy Assault) 253mm (excluding head horn) Overall Height (Heavy Assault) 260mm Shoulder Width (Heavy Assault) 520mm Head Height (Close Combat) 234mm (excluding head horn) Overall Height (Close Combat) 278mm Shoulder Width (Close Combat) 152mm Materials PS, PC, POM, Die-Cast Metal, Screws, LED system Power USB Type-C Configurations Genesic Heavy Assault Type / MS Close Combat Type Limited Production 3,888 units worldwide Product Weight Approximately 7.7 kg Box Dimensions 72 x 56 x 26 cm Assembly Required Yes - glue, paint, and finishing supplies required

The Bandai HGUC #265 1/144 TX-ff104 Alyzeus is a High Grade Universal Century model kit from Mobile Suit Gundam Hathaway: The Sorcery of Nymph Circe. Standing approximately 250mm (10 inches) tall upon completion, the Alyzeus is one of the largest and most feature-rich HG kits ever produced, built with an entirely new mold that faithfully captures its imposing silhouette, layered armor, and 20 Shelf Nozzle thrusters. This kit is suitable for beginner to intermediate builders thanks to snap-fit construction that requires no glue or painting, though the higher-than-average part count and transformation gimmicks offer a satisfying challenge. The TX-ff104 Alyzeus is an experimental training unit piloted by Lane Aim, developed by Anaheim Electronics as a high-speed flight trainer prior to the deployment of the RX-104FF Penelope. Key Features Four Display Configurations: Supports MS Form, Flight Form, Half-Destroyed State, and separated Mass Production Type Nu Gundam through part swapping and reconfiguration Armor-Purge Gimmick: The outer Alyzeus armor can be fully removed to reveal the RX-94 Mass Production Type Nu Gundam core unit, marking the first-ever 1/144 scale Gunpla release of this mobile suit Massive Scale: Stands approximately 250mm (10 inches) tall in MS Form, towering over standard HG kits at nearly double their typical height Dedicated Display Base: Includes a purpose-built display stand designed to support each of the four configurations, including the Flight Form Exceptional Color Separation: Pre-colored runners with clear parts for the plasma reactor components provide strong visual fidelity straight out of the box Extensive Articulation: Features double-jointed elbows and knees, ball-and-socket neck joint, 360-degree waist rotation, and movable skirt armor for dynamic posing across all forms Included Equipment and Accessories Beam Sabers x2 Prototype Beam Rifle x1 Additional Armor Set x1 Hand Parts x1 set Display Base x1 Stickers x1 Specifications Brand Bandai Spirits Series Mobile Suit Gundam Hathaway: The Sorcery of Nymph Circe Line High Grade Universal Century (HGUC) Kit Number #265 Scale 1/144 Model Number TX-ff104 Mobile Suit Name Alyzeus Pilot Lane Aim Mechanical Designer Hajime Katoki Bandai SKU 2805079 UPC/JAN 4573102720306 Product Type Snap-fit plastic model kit Country of Origin Japan Release Date April 2026

The Bandai 30MF #14 Rosan Wizard is a 1/144 scale snap-fit plastic model kit from the 30 Minutes Fantasy (30MF) series. This starter set features the Wizard class with a Lightning Element Core attribute, offering a sleeker and more refined Silhouette body compared to the Rosan Knight. The kit is suitable for beginner to intermediate builders, requiring no cement or painting to complete. 30 Minutes Fantasy is Bandai's customizable fantasy-themed model kit line, featuring medieval-inspired characters with interchangeable armor and weapon parts across the series. Key Features Lightning Element Core: The Rosan Wizard carries the Lightning attribute, distinguishing it from other classes in the 30MF lineup Streamlined Silhouette Body: Features a sleeker, more refined body design compared to the Rosan Knight, while maintaining excellent range of motion Advanced Articulation: Movable axes in the head, neck, chest, torso, and waist combined with a sliding hip mechanism enable natural, dynamic posing Stable Shoulder Joints: Specially designed shoulder joint structure maintains the body's clean lines even in bold poses Job Change System: Armor and weapon parts combine with the Silhouette body to transform it into the Rosan Wizard class Cross-Compatibility: Compatible with other 30MF kits for expanded customization and mix-and-match builds Fine Build Design: Inherited from the 30 Minutes Missions line, the Fine Build system allows for easier snap-fit assembly with pre-colored parts Included Equipment and Accessories Silhouette body unit Rosan Wizard armor set (shoulder armor, waist armor, additional armor parts) Wizard staff weapon Assembly instructions Specifications Brand Bandai Spirits Series 30 Minutes Fantasy (30MF) Line 30MF Kit Number #14 Scale 1/144 Class Rosan Wizard Element Core Lightning Bandai SKU 2745398 UPC / JAN 4573102688637 Product Type Model Kit Material PS (Polystyrene), PE (Polyethylene) Country of Origin Japan Release Date September 2025 (Japan)