Explore LAScaleModel's Latest Gundam Gunpla Models – New Arrivals Await!

GM-GODOMO GM-002 Luna-Trace Model Kit The GM-GODOMO GM-002 Luna-Trace is a 1/72 scale original science fiction mecha plastic model kit. Featuring a white-and-purple color scheme with a sharp, minimalist design, Luna-Trace takes a restrained approach compared to the flashier aesthetics common in Chinese third-party mecha kits. GM-GODOMO is an emerging Chinese manufacturer whose debut product, the 1/72 Solaridian, featured a full alloy inner frame - Luna-Trace shifts to an all-plastic construction at a significantly lower price point while retaining the brand's focus on high part count engineering and layered armor design. Key Features Scale and Size: 1/72 scale, approximately 23 cm tall to the head - over 25 cm with backpack equipped. Internal Frame: Full inner frame construction designed for stable posing and structural integrity. Part Count: Over 500 parts delivering layered armor panels and mechanical surface detail. Opening Armor Sections: Multiple armor panels open to reveal internal mechanical structure. Expansion Interface: Rear universal mount designed to support future backpack and weapon expansions. Interchangeable Hands: Five pairs of hands included - open hands, sword grip, gun grip, fist, and signature posing hand. No Paint Required: Color-separated parts deliver a complete appearance straight from the box. Builder Context Luna-Trace is suited for intermediate builders comfortable with high part counts and tight-fitting assemblies. The snap-fit construction requires no cement, and the approximately five-hour build time is comparable to a Bandai MG kit. Fit is reported as tight throughout with minimal need for part modification, making it accessible despite the 500+ part count. Why Build This Kit The GM-GODOMO GM-002 Luna-Trace stands out as one of the highest value-for-parts third-party mecha kits currently available, delivering over 500 parts with a full inner frame at a domestic Chinese price of 79 RMB. For builders looking to try a Chinese third-party kit without committing to a premium price point, Luna-Trace is the lowest-risk entry point in the GM-GODOMO lineup - the Solaridian (GM-001) costs significantly more due to its alloy frame. At 23 cm to the head and over 25 cm with the backpack, the finished build has strong shelf presence for a 1/72 kit, comparable to a standard Bandai MG in height. The minimalist white-and-purple design and balanced weapon loadout give it a protagonist-mecha feel that displays well next to Real Grade or Master Grade Bandai kits. Builders should note that the beam rifle and beam sabers are the only included weapons - this is not an accessory-heavy kit, and the value proposition is in the mechanical detail and armor layering rather than weapon count. Box Contents Luna-Trace main body runners (500+ parts) Internal frame components Armor parts and external panels Beam rifle Beam sabers Five pairs of interchangeable hands (open, sword grip, gun grip, fist, posing) Instruction manual Specifications Brand GM-GODOMO Model Number GM-002 Product Name Luna-Trace Scale 1/72 Height Approx. 23 cm (head height), 25+ cm with backpack Material ABS Part Count 500+ Build Type Snap-fit plastic model kit with full inner frame Color Scheme White and purple (color-separated, no painting required) Country of Origin China Category Third-Party Mecha Model Kit

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Overview The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Vivienne Hayha CF01 F.O.X. Long-Range Striker Unit Ver. Arctic White Fox (極地白狐) is a limited-edition color variant of the CF01 Vivienne Hayha kit from Nuke Matrix's original Cyber Forest Fantasy Girls series. Originally released as a CJ2024 convention exclusive, this version features an arctic white color scheme across the entire runner set, replacing the standard navy and dark tones of the original CF01 with a winter-operations aesthetic. Vivienne Hayha is the Empire's top sniper and leader of Fox Team - the first character released in the Cyber Forest lineup and a successful test subject of the Empire's Maiden Project. Key Features Limited-Edition Arctic White Fox Color Scheme - Convention-exclusive white color variant with arctic-themed runner colors, distinct from the standard CF01 release 1/12 Scale, Approx. 16 cm Assembled Height - Full character body with articulated joints for a wide range of posing options Two Selectable Body Configurations - One complete body per kit with two build options for armored and standard configurations Seven Weapons Included - F.O.X. Type I sniper rifle, F.O.X. Type I assault rifle, F.O.X. Type II sniper rifle, pulse-type magnum, "My Fang" tactical dagger, Apocalyptor light sword, and the large cross unit (ZERO System) Pre-Painted and Blank Face Plates - Three tampo-printed face plates plus four blank face plates for custom painting Thermal Conversion Tactical Scarf - Cloth accessory with Fox Team insignia, designed for Vivienne's cold-environment sniper operative setting Water Decals and Crystal Stickers - Dedicated detail markings for enhanced surface detail Builder Context The Ver. Arctic White Fox shares the same snap-fit construction as the standard CF01 - no painting or cement is required, though the white color scheme particularly benefits from panel lining to bring out detail. Build complexity is comparable to a Bandai RG-grade kit. Builders familiar with Kotobukiya Frame Arms Girl or Bandai 30MS kits will find a similar construction approach. The white plastic can show nub marks more visibly than darker colors, so careful nub cleanup with a hobby knife and sanding sticks is recommended. Why Build This Kit The Nuke Matrix CF01 Vivienne Hayha Ver. Arctic White Fox is a limited-edition convention exclusive that offers a distinct arctic winter-operations color scheme unavailable in the standard CF01 release. With seven individually named weapons - two sniper rifles, an assault rifle, a magnum, a dagger, a beam sword, and the oversized ZERO System cross unit - the CF01 remains the most accessory-dense kit in the entire Cyber Forest Fantasy Girls lineup. The white color variant is especially suited to builders who want a striking shelf display that stands out alongside standard-color Cyber Forest kits, and the lighter plastic makes it an attractive base for custom paint schemes. As a limited release, the Arctic White Fox version is not expected to be restocked once current inventory is sold through, making it a collector-focused purchase. Builders new to Nuke Matrix should know that face plate pegs and hand joints on Cyber Forest kits are smaller and more delicate than Bandai equivalents, so dry-fitting before final assembly is recommended. Box Contents Main body parts in arctic white color scheme (one complete body, two selectable body configurations) Pre-painted face plates x3 Blank face plates x4 Interchangeable hand parts x12 Cable part x1 Large cross unit (ZERO System) x1 F.O.X. Type I sniper rifle x1 F.O.X. Type I assault rifle x1 F.O.X. Type II sniper rifle x1 Pulse-type magnum x1 "My Fang" tactical dagger x1 Apocalyptor light sword x1 Thermal conversion tactical scarf x1 Display base and support arm x1 Water decal sheet x1 Crystal sticker sheet x1 Instruction manual x1 Specifications Brand Nuke Matrix Series Cyber Forest Fantasy Girls Character Vivienne Hayha Unit Designation CF01 F.O.X. Long-Range Striker Unit Version Ver. Arctic White Fox (極地白狐) - Limited Edition Scale 1/12 Assembled Height Approximately 16 cm Materials ABS, PVC Product Type Plastic Model Kit (Assembly Required) Decals Water decals and crystal stickers included Display Base Included Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix. All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Fantasy Girls Lirly Bell Special Edition Model Kit The Nuke Matrix 1/12 Cyber Forest Fantasy Girls Lirly Bell Special Edition – Remote Attack Battle Base Info Tactician (天眼跃兔—Ver.镜像潜行) is a plastic assembly model kit produced by Nuke Matrix. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. This kit is a 1/12 scale assembly model with an assembled height of approximately 16 cm. One complete body can be assembled per kit, with two selectable body configurations included. Box Contents Body parts x1 (one complete body per kit, two body options available) Pre-painted face parts x4 Blank face parts x4 Interchangeable hand parts x12 Quadruped robot x1 Handgun x1 Carrot missiles x2 Holographic projection system x1 Destruction cannon firing effect part x1 CP-95 assault rifle x1 Victor Type II x1 High-explosive shotgun x1 Pulse baton x1 Detail water decals x3 Crystal sticker x1 Cable wire x1 Display base and support stand x1 Instruction manual x1 Specifications Brand Nuke Matrix Line Cyber Forest Fantasy Girls Product Name 天眼跃兔—Ver.镜像潜行 Model Number FF0111V Scale 1/12 Assembled Height Approximately 16 cm Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Display Base Included

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA SC-008 Soul Spear Lamorak 1/144 Model Kit The SNAA SC-008 Soul Spear Lamorak is a 1/144 scale mecha model kit and the eighth release in the Round Table Knights – Beyond Exquisite (BE) series. Lamorak is classified under the Steel Knight tier, positioned as a balanced all-round combat unit designed for both ranged suppression and close-quarters engagement. The kit features a hybrid weapon system centered on a transformable lance, integrated shoulder-mounted laser cannons, and a heavy battle axe. SNAA's Round Table Knights line is a series of twelve original mecha designs based on Arthurian legend, built around a shared inner frame system at 1/144 scale. Each kit includes pre-painted armor panels, water-slide decals, and a full inner skeleton. The series is divided into three tiers - Gale (speed), Steel Knight (balanced), and Sanctuary (elite) - with four units per tier. Key Features Hybrid Weapon System: The Spirit Lance functions as both a close-combat spear and a ranged beam cannon, switching between modes without part-swapping. The Wall Smiting Axe provides a dedicated melee option for heavy assault posing. Integrated Shoulder Cannons: Both shoulder armor panels house Divine Laser Cannons with pulse shields, giving Lamorak dedicated ranged firepower independent of its handheld weapons. Dual Face Options: Includes two interchangeable face plates - a standard dual-eye visor and a single-eye knight visor - allowing two distinct display personalities. Improved Articulation: Redesigned waist and hip joints provide some of the best poseability in the Round Table Knights series to date, with wider range of motion than earlier entries. Pre-Painted Armor Panels: White, red, and gold color scheme with pre-painted accents over multi-color separated parts. Display-ready finish without painting. Full Inner Frame: Complete articulated skeleton consistent with all BE-series kits, supporting dynamic posing and cross-unit part compatibility. Builder Context Assembly is snap-fit with pre-painted armor. No painting or cement is required for a finished display. Build complexity is comparable to Bandai RG-grade kits, with a similar part count and inner frame structure. Water-slide decals are included for detail finishing. Recommended for intermediate builders or anyone who has completed at least one RG or MG kit. Why Build This Kit The SNAA SC-008 Lamorak is the most versatile unit in the Round Table Knights lineup - it is the only kit in the series with both integrated ranged weapons (shoulder-mounted Divine Laser Cannons) and a transformable primary weapon (Spirit Lance to beam cannon), making it the strongest all-rounder for builders who want one kit that can be posed in ranged, melee, or hybrid stances. At approximately 16 cm tall, Lamorak stands at RG-class proportions but includes a full inner skeleton, pre-painted armor, and water-slide decals at a price point roughly half that of a comparable Bandai RG kit. The dual face option - standard visor or single-eye knight visor - is uncommon in the Round Table series and adds display variety without any modification. Lamorak shares visual DNA with Iron Sickie and Achilles but uses a red and white color palette that breaks from the blue/gold tones that dominate the rest of the lineup. For builders entering the Round Table Knights series, Lamorak is the recommended starting point due to its improved waist and hip articulation, balanced weapon set, and competitive pricing. Box Contents Soul Spear Lamorak main body components Spirit Lance ×1 (transforms to beam cannon mode) Wall Smiting Axe ×1 Shoulder shields with Divine Laser Cannon ×2 Alternate face plate (single-eye knight visor) ×1 Water-slide decal sheet Instruction manual Specifications Brand SNAA × Starry Craftsman Series The Round Table Knights – Beyond Exquisite (BE) Model SC-008 Soul Spear Lamorak Tier Steel Knight Scale 1/144 Height Approx. 16 cm (6.3 in) to head Material ABS, PS Finish Pre-painted armor panels with color separation Markings Water-slide decal sheet included Articulation Fully articulated inner frame (improved waist/hip joints) Face Options Dual-eye visor + single-eye knight visor Box Dimensions Approx. 300 × 195 × 100 mm Weight Approx. 0.77 kg Product Type Plastic assembly model kit IP Original third-party mecha design

Official Nuke Matrix Retailer LA Scale Model is an authorized retailer of Nuke Matrix All Nuke Matrix model kits are 100% genuine and sourced directly from the manufacturer. Nuke Matrix Cyber Forest Cyclone Hopper Model Kit The Nuke Matrix Cyber Forest Cyclone Hopper is a highly articulated original mecha girl kit from Nuke Matrix’s Cyber Forest lineup. This is a Third Party Gundam Gunpla Like Mecha Model Kit and is not affiliated with Bandai or the Gundam franchise. The kit combines a humanoid character body with modular armor systems, a transformable combat motorcycle, and extensive wind-themed effect parts designed for high-mobility action displays. Key Features Dual Body Configuration: Includes both a human body and an armored body, allowing multiple display states. Vehicle Integration: Comes with the Storm Chaser motorcycle, designed to pair directly with the Cyclone Hopper character. Effect Parts: Includes multiple wind-based and attack effect parts such as Spines Cutter, High-pressure Air Cutter, Cyclone Kick, and spiral effects. Pre-painted Runners: Select runners are pre-painted to enhance surface detail straight out of the box. Display Support: Action base included for dynamic airborne and combat poses. Customization: Multiple face plates, hand types, feet options, and armor components included for varied expressions and setups. Compatibility: Includes three different neck joint sizes, compatible with other mecha girl kits on the market. Box Contents Human body x1 Armour body x1 Storm Chaser motorcycle x1 Insect Instrument Unit (helmet) x1 Backpack x1 Strike Trampler x2 Orthoptera Booster x2 Spines Cutter effect parts x2 Spines Cutter Mode II effect parts x2 High-pressure Air Cutter effect parts x2 QianJi Spiral effect part x1 Spiral Cut effect part x1 Cyclone Kick effect part x1 Armour hands x6 pairs Standard hands x7 pairs Pre-printed face plates x5 Blank face plates x5 Sneaker feet x1 pair Naked feet x2 pairs Cloth suit x1 set Matrix Driver - Acrididae Type I x1 Water decals x2 Action base Different size neck joints x3 Instruction manual Specifications Brand Nuke Matrix Line Cyber Forest Model Name Cyclone Hopper Product Type Third Party Gundam Gunpla Like Mecha Model Kit Decals Water decals included Pre-painted Parts Some runners pre-painted Display Base Action base included Compatibility Multiple neck joint sizes included for cross-compatibility Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Hemoxian 1/10 Over Zero – Lone Shadow Ninja Single Unit Model Kit The Hemoxian 1/10 Over Zero – Lone Shadow Ninja (Single Unit) model kit is a detailed 1/10-scale third-party mecha figure offering a dynamic action presence suited for collectors and builders interested in original IP mecha designs. This single-unit version includes the core build parts without the larger accessory kit, making it a focused entry for Hemoxian’s Over Zero lineup. Key Features 1/10 scale original mecha model kit by Hemoxian Unique “Lone Shadow Ninja” design with stylized silhouette and ninja-inspired aesthetics Plastic construction with articulated joints for dynamic posing Model height approx. 19 cm when fully assembled Includes essential build parts for the Lone Shadow unit Compatible with additional Over Zero accessories and expansions (sold separately) Instructions included (language may vary by batch) Description The Lone Shadow Ninja blends sleek mechanical angles with a combat-ready posture that emphasizes agility and form. With an articulated build, this kit lets builders pose the model in dynamic stances and expressions. As a single-unit version of the Lone Shadow design, it provides the core model for customization or standalone presentation. Detailed outer armor and ninja-themed silhouette give this kit a distinctive visual identity within the Hemoxian Over Zero series. The parts are molded for clean assembly, and though decal and finish options may vary by batch, the base kit forms a solid foundation for further enhancement. Box Contents Main unit runners for Lone Shadow Ninja Articulated joint components Essential armor and detail parts Decal sheet Instruction manual Specifications Brand Hemoxian Model NBD-009 Lone Shadow Ninja (Single Unit) Scale 1/10 Height Approx. 19 cm (7.48″) Material ABS, PS, TPE Articulation Poseable joints Kit Type Third-party mecha model kit

EDDAS ALF-PMC-01 Salamander 1/100 Mecha Model Kit The EDDAS ALF-PMC-01 Salamander is a 1/100 scale mecha model kit from EDDAS Technology, representing a heavily customized special-operations unit built for the mercenary organization ALF. The Salamander features a reinforced zinc alloy internal frame, a high-output chest particle cannon, and an overclock system derived from the EDDAS Valkyrie series that enables short-burst triple-output combat performance. EDDAS Technology is a Chinese manufacturer known for original mecha designs with alloy-frame construction at competitive price points, with the Salamander joining their lineup alongside the Asgard and Valkyrie. Key Features Zinc Alloy Internal Frame: Pre-assembled alloy joints throughout the shoulders, elbows, knees, waist, and hips provide weight (approximately 254 g assembled) and strong joint retention across all articulation points. Beam Particle Cloak: A large translucent red energy cloak with embedded glitter particles attaches to the backpack via a three-point locking system, creating a flowing silhouette under display lighting. Composite Long Blade: A mechanical-style sword that splits at the midpoint into two independent weapons - a single-handed sword and a small axe - connected by a sliding rail system. Distributed Beam Weapons: Six beam saber hilts stored across the rear skirt and backpack, two 60mm pistols mountable on the rear skirt, and beam blade emitters on both forearms and feet with included translucent effect parts. Core Fighter Unit: An included transformable support craft that separates from the main body. Matte Surface Finish: Outer armor panels use a frosted matte texture with a blue-purple primary color scheme accented by gray and red detail separation. Comprehensive Hand Options: Four pairs of interchangeable hands (fisted, open, relaxed, weapon grip) with ball-joint wrists and independently articulated thumbs. Builder Context The Salamander is a snap-fit kit with 19 runners and does not require cement or painting for a complete build, though painting is recommended for full color accuracy on smaller details. The alloy joints require slightly more force to pose than typical plastic kits. Build complexity is comparable to a Bandai MG kit, making it suitable for intermediate builders comfortable with multi-runner assembly and water-slide decal application. Why Build This Kit The EDDAS ALF-PMC-01 Salamander is among the most affordable 1/100 scale alloy-frame mecha kits currently available from any manufacturer, with a feature set - zinc alloy skeleton, beam effect parts, display base, water-slide decals, and a separable core fighter - that typically appears in kits priced significantly higher. At 19 cm tall and 254 g, the Salamander has noticeable heft and shelf presence comparable to a Bandai MG kit, with the added weight and joint stability that comes from the metal frame. The kit is a practical entry point into the EDDAS lineup for builders who want to try alloy-frame construction without the higher investment of the Valkyrie ($65+) or Asgard ($80). Builders should note that the chest-waist alloy joint is intentionally tight and requires firm pressure to pose, and the head features two interchangeable face masks - one opaque gray for custom painting and one transparent for light-piping effects with the included foil stickers. Box Contents Salamander main body (19 runners) Pre-assembled zinc alloy joint components Beam particle cloak (translucent red with glitter) Core fighter unit Composite long blade (separable into sword + axe) 60mm caliber pistols x 2 Beam particle sword effect parts x 2 Beam particle dagger effect parts x 2 Hand beam particle sword effect parts x 2 Leg beam particle sword effect parts x 2 High-output beam particle slash effect part x 1 Interchangeable hands x 4 pairs (fisted, open, relaxed, weapon grip) Interchangeable face masks x 2 (opaque gray, transparent) Water-slide decal sheet x 1 Foil color-correction sticker sheet x 1 Telescopic display stand x 1 Display base x 1 Assembly manual x 1 Specifications Brand EDDAS Technology Model ALF-PMC-01 Salamander Scale 1/100 Height Approximately 19 cm (7.48 in) Weight Approximately 254 g (assembled) Materials ABS, PS, POM, Zinc Alloy Runner Count 19 Kit Type Snap-fit assembly, painting optional

Ming Jiang Legend Snow Demon Yukioni Kiyomori 1/100 Scale Model Kit The Snow Demon Yukioni Kiyomori is a 1/100-scale third-party mecha model kit offering a fully articulated internal frame plus detailed armor and weapon systems. With a striking white-and-red “demon-warrior” aesthetic, floating cannons, blades, guns, and a display base, this kit delivers both visual flair and build depth — a strong choice for collectors who value originality and display-ready presence. Product Highlights 1/100 scale original-IP mecha model kit by MingJiangZhuan / MJZ Studio Approximately 23 cm tall when assembled — ideal shelf-size for 1/100 collections Pre-assembled (pre-built) internal skeleton frame — reduces assembly difficulty, improves stability Full articulation — poseable joints upon build completion Extensive weapons and accessory set including floating cannons, firearms, sword(s), and effect parts Armor and backpack detail inspired by Oni / demon-warrior motifs with stylized silhouette and color scheme Display base included — ready for shelf display or photography setups Limited-edition / collector-oriented release — makes for a standout finish kit Description The Snow Demon Yukioni Kiyomori blends fantasy-style mecha design with robust build engineering. Its internal skeleton supports dynamic posing and stable mounting of heavy weaponry, while the external armor and demonic styling — combining crisp white and red tones — deliver a strong visual identity. The floating cannons and weapons system add complexity and display potential, making the kit ideal for diorama setups or showcase builds. As a third-party kit, it may require careful nub removal and potentially decal or panel-lining work for optimal finish. The final result, however, stands out for range of motion, detail, and thematic aesthetic — perfect for collectors who want an original-style mecha build rather than standard franchise Gunpla. Box Contents & Features Pre-assembled skeletal frame (internal structure) Armor and external shell parts Floating cannons × 2 (with effect parts) Guns, handgun/longarm weapons Sword(s) / melee weapon(s) Backpack / armor extensions and decorative pieces Display base Decal sheet Instruction manual Specifications Brand Ming Jiang Legend (MJZ Studio) Model Snow Demon Yukioni Kiyomori Scale 1/100 Height Approx. 23 cm Material Plastic (ABS) external parts + articulated skeleton frame Articulation Full poseable joints Accessories Floating cannons, guns, swords, display base, decals, effect parts Kit Type Third-party mecha model kit / Gunpla-style

Nilson Works Monument-FX | PG 1/60 Mecha Model Kit The Nilson Works Monument-FX is a premium PG-scale 1/60 mecha model kit featuring an angelic dual-wing configuration, long-form weapon system, and 801 total parts for a large-format building experience. With reinforced internal waist engineering designed to support heavy wing and backpack structures without external support, Monument-FX is built as a showcase centerpiece for display collectors. Product Highlights PG-class 1/60 scale mecha model kit by Nilson Works Total part count: 801 pieces Massive primary wingspan approx. 780mm Secondary wing span approx. 368mm Reinforced waist joint for backpack + wing load stability Cannon extended length approx. 460mm Shield + heat whip length approx. 575mm Base stand included for pose support and display Designed for advanced modelers seeking a high-impact centerpiece build Description Monument-FX emphasizes a grand silhouette with layered mechanical wings and a tall central frame presence. The reinforced waist system allows for stable poses even with the full wing load attached, reducing the need for additional supports. The long cannon, heat whip, shield, and dual beam sabers offer multiple dynamic posing options using the included stand. With 801 parts and PG-scale size, this build is suited to collectors who enjoy detailed assembly and want a visually commanding kit capable of dominating a display shelf or lighted case. Box Contents Monument-FX model runners (801 parts total) Cannon (with effect parts) Beam Sabers × 2 Shield Heat Whip Base Display Stand Instruction Manual Specifications Brand Nilson Works Product Monument-FX Scale PG-class 1/60 Total Parts 801 Main Wingspan Approx. 780mm Secondary Wingspan Approx. 368mm Cannon Length Approx. 460mm Shield & Heat Whip Approx. 575mm Model Type High-detail large-format mecha kit Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom Gundam (RGB Upgrade Kit) The KOSMOS LED Lighting System for MGEX 1/100 Strike Freedom is a third-party RGB lighting upgrade engineered to illuminate the wings, internal frame, and head unit of the MGEX Strike Freedom. Featuring multi-zone light control, redesigned transparent wing parts for better diffusion, and an app-capable controller, this kit transforms Strike Freedom into a premium display centerpiece. Product Highlights Designed specifically for Bandai MGEX 1/100 Strike Freedom Gundam RGB multi-zone lighting system — wings and head illumination Wireless controller with mobile app support for color and animation effects Replacement transparent wing effect parts included for improved light diffusion No soldering required — plug-and-wire installation system Ideal for “Full Burst Mode” or “Wings of Light” style display setups Description The KOSMOS LED Lighting System elevates the MGEX Strike Freedom beyond standard display presentation. Light channels run through the wings and head unit, allowing builders to create dynamic visual effects ranging from static illumination to flowing gradient animations. The included replacement effect parts enhance light distribution, producing a bright and clean glowing wing appearance that is ideal for shelf display or photography. This system is designed for intermediate builders familiar with LED routing inside Gunpla frames. While no soldering is needed, careful handling during assembly is recommended to prevent pinching wires between inner and outer armor layers. Installation Notes MGEX Strike Freedom Gundam model kit not included Wing effect parts included with this LED upgrade are used in place of stock clear parts Minor trimming or adjustment may be required for ideal cable routing Always test lights before final assembly Box Contents RGB LED harness for wings and head Transparent wing effect replacement parts LED control module Power supply cable (USB or battery-powered depending on batch) Wireless remote and/or app pairing instructions Mounting aids, connectors, installation guide Specifications Brand KOSMOS Product LED Lighting System for MGEX Strike Freedom Compatibility Bandai MGEX 1/100 Strike Freedom Gundam Lighting Type RGB multi-zone LED Control Wireless module with app support Installation No soldering — internal wiring route required Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

KOSMOS RG 1/144 God Gundam LED Set The KOSMOS RG 1/144 God Gundam LED Set is a third party RGB lighting upgrade designed specifically for the Real Grade God Gundam. This set adds dramatic illumination to the halo sheet and compatible effect parts, enhancing God Gundam’s signature attack poses and turning the kit into a striking display piece. Product Highlights RGB LED upgrade unit for RG 1/144 God Gundam Designed to light the halo sheet and compatible option parts Dedicated palm light for God Gundam’s special attack poses Additional special effect light to boost visual impact Includes metal nameplate for a premium display base finish Remote-controlled lighting with multiple modes via control module Part of the KOSMOS 30 MIN Series LED accessory lineup Description This LED set focuses on enhancing the most iconic visual elements of the RG God Gundam. The halo lighting brings depth and glow to the effect sheet, while the palm and special effect lights highlight powerful attack poses. The included metal nameplate gives the finished display a more complete and collector-focused presentation. The LEDs are pre-wired and connect to a compact power module, making installation achievable for experienced Gunpla builders without soldering. As with most LED upgrades, careful test-fitting and cable routing are recommended to avoid pinching wires during assembly. Important Notes RG 1/144 God Gundam model kit and stands are not included. This is an unofficial third party accessory, not a Bandai product. LED units should be tested before installation to confirm proper operation. Some internal trimming or careful routing may be required for the cleanest install. Box Contents Halo light set for RG God Gundam Palm light unit Special effect light unit Power supply module Remote control God Gundam metal nameplate Connection wiring and components Instruction sheet Specifications Brand KOSMOS Series 30 MIN Series LED Accessories Product RG 1/144 God Gundam LED Set Compatibility RG 1/144 GF13-017NJII God Gundam and related option parts Lighting Type RGB LED with control module and remote Included Effects Halo, palm, and special effect lighting Contents LED units, power module, remote, metal nameplate, instructions Backorder Notice: This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Bamboo Hat Conversion Kit for Legend of Star General Wei Yuan This Bamboo Hat Conversion Kit is a third party GK upgrade set designed for the Legend of Star General Wei Yuan (Model Trainee Mecha). The kit replaces or enhances the standard head equipment with a stylized mecha bamboo hat featuring mechanical detailing. It also includes a night vision goggle unit and an optional single eye patch for alternate display configurations. Product Highlights GK resin conversion kit made for Wei Yuan from Legend of Star General Mecha-style bamboo hat with molded surface panel detail Includes night vision goggle attachment with mechanical sensor sculpting Optional single eye patch for asymmetric head customization Designed for modelers who enjoy character-focused and thematic customization Compatible with the head unit of the Wei Yuan model trainee mecha Description This upgrade set allows builders to give their Wei Yuan mecha a unique and thematic look. The bamboo hat recreates traditional silhouette elements in a mechanical form, while the included night vision goggle adds a tactical or scouting vibe. The optional eye patch further personalizes the unit with an alternate character-style expression. As a GK conversion kit, parts may require sanding, fitting, or minor adjustment. It is intended for modelers familiar with resin accessory installation and custom finishing. Box Contents Bamboo hat conversion part × 1 Night vision goggle unit × 1 Optional single eye patch × 1 GK resin parts set Specifications Type GK Conversion Kit Material Resin Compatibility Legend of Star General – Wei Yuan (Model Trainee Mecha) Included Options Bamboo hat, NV goggle, eye patch

Overview The Special Forces Industry 1/100 Sentinel is a third-party mecha model kit built around a complete prebuilt alloy inner frame. Released in 2024 by Special Forces Industry (特战工业), the same manufacturer behind the Fire Shadow series, the Sentinel represents a sniper-type mecha design with an emphasis on mechanical weight, joint quality, and modular weapon configurations. Special Forces Industry is a Chinese third-party brand known for alloy-integrated mecha kits that prioritize internal frame engineering over external detail density. Key Features Complete Prebuilt Alloy Inner Frame - The entire internal frame is a finished alloy assembly with pre-tuned joint damping, not partial alloy inserts or individual joint upgrades. The 120-part alloy frame ships fully assembled and ready for outer armor attachment. Dual Configuration Build - The kit includes parts for two distinct loadout types, Sniper Type and Heavy Bombardment Type, with two interchangeable head sculpts and double sets of all primary weapons and equipment. One purchase supports two complete display configurations. 702 Total Parts - 120 parts within the prebuilt alloy frame and 582 buildable outer armor and accessory parts in ABS and POM. Pre-Painted Armor Sections - Navy blue, red, antenna, and green visor components are factory pre-sprayed for a near-finished appearance without painting. Modular 24.5 cm Sniper Rifle - The primary weapon can be reconfigured into a compact machine gun by removing the barrel, stock, and optics. Fully Articulated Five-Finger Hands - Individual finger joints require assembly but provide firm weapon grip and natural posing. Multi-Mechanism Articulation - Retractable face mask, extending elbows, three-segment waist bend, linked knee joints, and multi-angle adjustable thrusters. Builder Context The Sentinel is a moderate-difficulty snap-fit kit suited for intermediate to advanced builders. The outer armor is press-fit assembly with no cement required, though builders have noted that some peg tolerances run tighter or looser than typical Bandai kits. The prebuilt alloy frame eliminates the most complex part of the build, so the actual assembly process focuses on attaching outer armor panels and weapons. Builders familiar with MG-grade Bandai kits will find the build format comparable, with the added weight and joint stability of the alloy inner frame. Why Build This Kit The Special Forces Industry 1/100 Sentinel is one of a small number of third-party 1/100 mecha kits that ship with a complete prebuilt alloy inner frame rather than partial alloy joints or plastic-only construction. At 20.7 cm and approximately 702 parts, the finished build has a noticeably heavier, more substantial feel than standard plastic kits at the same scale, including Bandai MG kits. The dual-configuration design, which includes enough parts to build either a Sniper Type or Heavy Bombardment Type loadout with two interchangeable heads, offers display flexibility that most single-configuration kits at this price point do not match. Builders who want alloy frame construction at the 1/100 scale without the price of a high-end diecast figure will find the Sentinel competitive, though peg tolerances across the outer armor can be inconsistent and may require minor fitting adjustments during assembly. The Sentinel is a reasonable entry point into Special Forces Industry kits and third-party alloy-frame mecha in general, particularly for builders who prioritize joint stability and posing weight over surface detail refinement. Box Contents 1x Prebuilt alloy inner frame (120 parts, fully assembled) Outer armor runner sets (582 parts) 2x Interchangeable head sculpts 2x Sniper rifle kit (24.5 cm assembled, modular breakdown to machine gun) 2x Short firearms (side armor stored pistols) 2x Beam sabers 2x UV-reactive pre-painted beam saber effect parts 2x Cannons 2x Shields with articulated mechanical arm mount 2x Robotic sub-arms 2x Leg large thrusters 2x Missile launcher pods 2x Sniper replacement antenna pairs 2x Adaptors/connectors 1x Storage base with compartments 1x Alloy universal support arm stand Assembly instructions Brand Special Forces Industry (特战工业) Product Name Sentinel Model Number TZGY-01 Scale 1/100 Height Approximately 20.7 cm Materials Alloy, POM, ABS Total Parts 702 (120 alloy frame + 582 buildable) Pre-Painted Areas Navy blue, red, antenna, green visor Assembly Type Snap-fit (outer armor); alloy inner frame ships prebuilt Configurations Sniper Type / Heavy Bombardment Type (dual build option) Display Base Included - storage base with alloy universal support arm Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA Retailer LA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/100 YR-05 Nether Emperor A.P. TYPE The SNAA 1/100 YR-05 Nether Emperor A.P. TYPE is the fifth entry in SNAA's Emperor Series of 1/100 scale original mecha model kits. Unlike the Fire Lord (YR-04) and its heavy flame-effect armor loadout, the Nether Emperor takes a stripped-back approach - prioritizing mobility, posability, and a clean silhouette over raw part volume. SNAA (also known as Sen En Model / 森恩模型) is a Chinese manufacturer known for original mecha designs across their Emperor Series (1/100) and Round Table Knights (1/144) lines. Key Features Slim, High-Mobility Design - Breaks from the heavy backpack and multi-layer armor approach of previous Emperor kits in favor of a streamlined, posing-friendly silhouette Full Inner Frame - Complete articulated skeleton with cockpit hatch that slides open, waist rotation of approximately 45 degrees, and hip joints with pull-down extension for expanded leg range of motion Swappable Accent Colors - Includes both green and orange energy-frame accent parts that can be exchanged or mixed across the armor Ghost Mask Faceplate - Alternate head option featuring a spectral mask design, swappable with the standard face Dual Antenna Colors - Yellow and blue antenna options included for head customization Combinable Weapon System - Thunder Pulse laser gun, Instant Flash Broken Blade with extendable tip, and a retractable bayonet that draws from its scabbard - all weapons connect via adapter keys with angled articulation and can mount on the rear waist for storage Pre-Colored Runners and Snap-Fit Assembly - Molded color separation delivers a display-ready build out of the box with over 350 parts across ABS, POM, and PVC materials Builder Context The Nether Emperor is suited for intermediate to advanced builders. The inner frame joints run tight during assembly and require firm pressure to seat properly, though the outer armor panels fit more smoothly. Construction is snap-fit with no cement required, and the pre-colored runners mean no painting is needed for a complete-looking build - comparable in build complexity and scale to a Bandai Master Grade kit. Why Build This Kit The SNAA 1/100 YR-05 Nether Emperor A.P. TYPE is the most posable kit in the Emperor Series and the most affordable at its price point, making it the recommended entry point for builders interested in SNAA's 1/100 line. Where the Fire Lord (YR-04) delivers maximum visual impact through sheer volume of flame-effect parts and a locked-in display pose, the Nether Emperor stays flexible and playable after assembly - a deliberate design tradeoff confirmed by Chinese-language reviews. At 22 cm tall with a full inner frame and 350+ parts, it offers a build experience comparable to a Bandai MG kit but with SNAA's original mechanical aesthetic and a weapon system that emphasizes function over spectacle. Builders should know that SNAA inner frames tend to have tighter joints than Bandai equivalents, so a hobby knife for gate cleanup and patience during skeleton assembly will improve the experience. For builders already familiar with SNAA's 1/144 Round Table Knights, the Nether Emperor is the natural scale-up - similar design philosophy, but with the added complexity and shelf presence of a 1/100 kit. Box Contents YR-05 Nether Emperor A.P. TYPE model kit runners (350+ parts) Thunder Pulse laser gun Instant Flash Broken Blade (extendable tip) Retractable bayonet with scabbard Weapon connector adapters Ghost Mask alternate faceplate Green accent color parts Orange accent color parts Yellow antenna parts Blue antenna parts Interchangeable hand set Water slide decals Instruction manual Specifications Brand SNAA Series Emperor Series (Royal Series) Model Number YR-05 Product Name Nether Emperor A.P. TYPE Scale 1/100 Height Approximately 22 cm (8.66") Materials ABS, POM, PVC Part Count 350+ Assembly Snap-fit, no cement required

Official Motor Nuclear Retailer LA Scale Model is an authorized retailer of Motor Nuclear. All Motor Nuclear model kits are 100% genuine and sourced directly from the manufacturer. Motor Nuclear Legend of Star General MNP-XH14 Mo Li Qing Model Kit The Motor Nuclear MNP-XH14 Mo Li Qing from the Legend of Star General series is a premium third party Gundam Gunpla-like mecha model kit inspired by traditional Chinese mythology, classical theatre design, and sculptural art. With an incredible full-equipment height of approximately 54 cm and a body weight of around 1120 g, this kit delivers a commanding display presence supported by rich weapon systems and high articulation engineering. Product Highlights Part of Motor Nuclear's Legend of Star General series Chinese myth-inspired design with classical theatre and statue-art influences Massive size: approx. 54 cm tall when fully equipped (body alone approx. 26.5 cm) Weight approx. 1120 g (excluding display base) Extremely rich weapon loadout with multi-mode equipment functions Advanced articulation: deep elbow bends, multi-stage backpack extension, shoulder cannon-bay expansion, and fang-like rear skirt armor for weapon docking Bonus X-03 Five-Direction Demon-Locking Cannon included for expanded play ABS construction with POM used for core joint strength and stability Weapon & Equipment Details Main body × 1 Five-Way Qingyun Sword & Five-Way Five-Element Breaker Cannon × 1 Xiaotian Rings × 2 Fenggang Swords × 16 Small backpack × 1 Large backpack × 1 Replacement head × 1 Replacement faceplate × 1 Blue-black transparent part set × 1 Model hands × 7 pairs Qingyun Sword connector × 1 Xiaotian Ring connector sets × 2 Small backpack cover piece × 1 Base platform × 1 Hex-base plates × 2 Base bracket × 1 Transparent assist stands × 2 Nameplate × 1 & Mo Li Qing name sticker × 1 X-03 Five-Direction Demon-Locking Cannon (bonus) × 1 Long-arm cannon connector × 1 Short-arm cannon connector × 1 Articulated mechanical connector arm × 1 Description The Mo Li Qing mecha captures the powerful image of the mythological general while merging traditional cultural motifs with modern mechanical aesthetics. The detailed armor layers, weapon versatility, and imposing stature make it a centerpiece among high-end third party mecha kits. Its diverse articulation system allows for expressive poses, from battle-ready configurations to full equipment deployment. The included maintenance base, support brackets, and multiple connectors enhance its display capability, offering numerous layout and diorama options. As part of the Legend of Star General series, Mo Li Qing represents one of the most elaborate and visually dynamic releases from Motor Nuclear. Box Contents Mo Li Qing MNP-XH14 main body Full weapon and accessory suite as listed above Display bases, brackets, connectors, and nameplate Instruction manual Specifications Brand Motor Nuclear Series Legend of Star General Model MNP-XH14 Mo Li Qing Height (full equipment) Approx. 54 cm Height (body only) Approx. 26.5 cm Weight Approx. 1120 g (excluding base) Material ABS + POM core joints

Ming Jiang Legend & Blue Whales 1/100 REA-03 Lynx Mecha Model Kit The Ming Jiang Legend & Blue Whales 1/100 REA-03 Lynx is a premium third party Gundam Gunpla-like mecha model kit that focuses on realistic mechanical presence and display options. Built at 1:100 scale with ABS and POM core joints, Lynx features a multi-mode sniper railgun, detailed internal structure, and an integrated maintenance platform that enhances both the build and display experience. Features The LN-26 ultra-long-range sniper railgun supports multi-mode shooting, with barrel patterns and energy-flow details for a hardcore mechanical look. Combined with the exposed skeleton structure, the kit delivers a strong, high-tech combat feel. Includes an exclusive combined maintenance and preparation platform and base, complete with a maintenance robotic arm and ground crew personnel. Materials are ABS with POM used for core joints to support stable articulation. Scale & Dimensions Scale: 1:100 Height (sole to head): approximately 21.5 cm Height (sole to shoulder armor): approximately 22.9 cm Accessory Details Mecha main body × 1 Mecha backpack × 1 Hand types × 3 pairs LN-26 ultra-long-range sniper railgun × 1 Beam rifle × 1 Combined maintenance preparation platform × 1 Base bracket × 1 Maintenance personnel × 8 Decal × 1 Description REA-03 Lynx is designed as a realistic, combat-oriented machine with a heavy emphasis on its signature LN-26 ultra-long-range sniper railgun. The multi-mode shooting function and detailed barrel engravings give the weapon a strong sense of energy flow and power. Combined with the internal skeleton details visible through the armor, the overall mechanical combat feeling is fully emphasized. The included combined maintenance platform and base bracket turn Lynx into a complete hangar scene out of the box. The maintenance robotic arm and eight crew figures allow you to set up inspection, loading, or standby poses, making this kit ideal for diorama-style displays as well as standalone posing. Box Contents REA-03 Lynx 1/100 mecha main body Mecha backpack Three pairs of interchangeable hands LN-26 ultra-long-range sniper railgun Beam rifle Combined maintenance preparation platform Base bracket Eight maintenance personnel figures Decal sheet Instruction manual Specifications Brand Ming Jiang Legend & Blue Whales / Sunday Hobby Model REA-03 Lynx Scale 1:100 Height to Head Approx. 21.5 cm Height to Shoulder Armor Approx. 22.9 cm Materials ABS with POM for core joints

The Bandai HGGQ #08 1/144 gMS-κ GFreD is a High Grade model kit from the anime series Mobile Suit Gundam GQuuuuuuX. The GFreD is the sister unit to the protagonist's gMS-Ω GQuuuuuuX, featuring a distinctive head design with two ES Bit remote weapons and a unique color scheme. This kit is recommended for beginner to intermediate builders, with snap-fit assembly requiring no glue or paint. Piloted by the character Nyaan, the GFreD debuted in episode 8 of the series and plays a key role in the story's climactic events.Key Features Swappable Head Unit: Includes two head parts to display either the closed or deployed state, recreating the GFreD's transformation gimmick from the anime. Full Body Articulation: Articulated joints in the torso, hips, and other areas allow for dynamic action poses with a wide range of motion. Flexible Backpack: The backpack unit features flexible articulation, enabling expressive posing from various angles. ES Bits Luna and Artemis: The distinctive ear-mounted remote weapons can be separated and posed in flight using included connection pieces attached to a base (sold separately). Complete Weapon Loadout: Equipped with a beam rifle, beam sabers, and a shield with I-Field Generator design. Excellent Color Separation: Modern color-separated molding delivers accurate color reproduction straight from the box with minimal sticker reliance. Included Equipment and Accessories Weapon set (beam rifle, beam sabers) Shield Backpack unit Interchangeable head parts (closed and deployed states) Interchangeable hand parts ES Bit connection pieces Stickers Marking stickers Assembly instructions Specifications Brand Bandai Spirits Series Mobile Suit Gundam GQuuuuuuX Line HGGQ (High Grade Gundam GQuuuuuuX) Kit Number #08 Scale 1/144 Model Number gMS-κ Mobile Suit Name GFreD (Gundam FreD) Pilot Nyaan Height Approx. 12.5 cm Bandai SKU 2762140 UPC 4573102686824 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date August 2025

Official SNAA Retailer LA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/100 YR-04 Fire Lord – Phantom Flame Soul Ver. Limited Edition The SNAA 1/100 YR-04 Fire Lord Phantom Flame Soul Ver. Limited Edition is a premium third party Gundam Gunpla-like mecha model kit designed for collectors who want a high-impact display piece. This exclusive edition upgrades the Fire Lord platform with iridescent and titanium-silver pre-coated armor, expanded flame weapon forms, and a refined finish only available in the limited release. Product Highlights Limited Edition release with exclusive pre-coated metallic finish 1/100 scale third party Gundam Gunpla-like mecha model kit Iridescent silver and titanium-silver pre-sprayed armor panels Over 800 parts for a deep, detailed build experience Enhanced flame-themed armament with multiple awakening forms Highly articulated internal frame for dynamic display options Pre-Coated Armor Panels Light cyan armor replaced with iridescent silver pre-coat Light gray armor replaced with titanium silver pre-coat Armament Phantom Flame Cloak × 1 Guardian Shield × 1 Awakening: Burning Flight Shield × 1 Phantom Flame Burning Star Spear × 1 Awakening: Phantom Flame Spear × 1 Awakening: Burning Star Spear × 1 Burning Flame Spikes × 2 Awakening: Burning Flame Blades × 2 Burning Heaven Slash × 2 Blazing Flame Fangs × 2 Description This Limited Edition Phantom Flame Soul version enhances the Fire Lord with upgraded metallic finishes and an expansive set of flame-powered weaponry. The layered armor, awakening weapon modes, and dramatic Phantom Flame Cloak combine to create a commanding silhouette on any display shelf. With high articulation, detailed mechanical structure, and broad weapon transformation options, the Fire Lord Phantom Flame Soul Ver. Limited Edition caters to advanced modelers who appreciate expressive posing, premium finishes, and collectible-quality third party Gundam Gunpla-like mecha kits. Box Contents YR-04 Fire Lord Phantom Flame Soul Ver. Limited Edition model kit parts Phantom Flame Cloak Guardian Shield Burning Flight Shield (Awakening) Phantom Flame Burning Star Spear Phantom Flame Spear (Awakening) Burning Star Spear (Awakening) Burning Flame Spikes × 2 Burning Flame Blades (Awakening) × 2 Burning Heaven Slash × 2 Blazing Flame Fangs × 2 Instruction manual Specifications Brand SNAA Model Series Emperor / Royal Series Edition Limited Edition Model YR-04 Fire Lord – Phantom Flame Soul Ver. Scale 1/100 Part Count Over 800 parts Material Injection-molded plastic with pre-coated metallic finishes

The Bandai HGGS #38 1/144 ORB-01 Shiranui Akatsuki Gundam is a High Grade Gundam SEED model kit depicting the iconic gold-armored mobile suit from Mobile Suit Gundam SEED Destiny. This version features the "Shiranui" Space Pack equipped with seven remote-controlled beam turrets for the DRAGOON system, as piloted by Mu La Flaga (Neo Roanoke) in the series' final battles. Suitable for beginner to intermediate builders, this snap-fit kit requires no glue or painting to complete. Originally released in 2006, the Shiranui Akatsuki remains a standout kit thanks to its striking gold-plated (mekki) finish and impressive accessory count.Key Features Gold-Plated Finish: Major body parts feature mekki gold plating to reproduce the Akatsuki's mirror-surface "Yata-no-Kagami" armor, with undergated runners to minimize nub marks on plated surfaces. Shiranui Space Pack: Includes the complete backpack with movable thrusters and seven individually removable beam turrets for DRAGOON system display. Dragoon Launch Effects: Four clear effect parts allow recreation of beam turret launch and firing poses. Ball-Joint Articulation: Double ball joints on shoulders and ball-and-socket joints on hands and thighs provide a wide range of posing options. Striker Pack Compatible: The Akatsuki is compatible with various HGGS, HGCE, and HGBF Striker Packs for expanded customization. Display Stand Included: A dedicated display stand is included for aerial and action poses without requiring a separate Action Base. Snap-Fit Assembly: No glue or paint required - parts snap together for a clean build straight out of the box. Included Equipment and Accessories Akatsuki Gundam Dual Beam Saber Beam Saber hilts "Hyakuri" Beam Rifle Shield "Shiranui" Space Pack 7 Beam Turrets 4 Effect parts Display stand Foil stickers and Gundam decals Specifications Brand Bandai Spirits Series Mobile Suit Gundam SEED Destiny Line High Grade Gundam SEED (HGGS) Kit Number #38 Scale 1/144 Model Number ORB-01 Mobile Suit Name Shiranui Akatsuki Gundam Pilot Mu La Flaga (Neo Roanoke) Bandai SKU BAS1141041 UPC 4573102603647 Product Type Model Kit Material PS, PE, ABS Country of Origin Japan Release Date January 29, 2006

The Bandai HGGQ #09 1/144 MS-09 Gaia's/Ortega's Rick Dom (GQ) is a High Grade snap-fit plastic model kit from Mobile Suit Gundam GQuuuuuuX. This kit faithfully reproduces the custom Rick Dom piloted by the Black Tri-Stars members Gaia and Ortega, featuring their signature purple and black color scheme and reworked proportions with enhanced thruster units. Suitable for beginner to intermediate builders, the HGGQ line features snap-fit assembly with no glue or painting required. Two distinct configurations - Gaia's and Ortega's units - can be built from the same kit, each with unique emblem markings.Key Features High-Mobility Transformation: Transforms into high-speed mode without swapping parts, deploying the signature third leg for additional thrust Giant Bazooka: Includes a 360mm Giant Bazooka accessory with a movable grip for dynamic weapon-handling poses Electromagnetic Harken: Lead wire is included to recreate the electromagnetic harken (taser wire) attack effect Movable Mono-Eye: The mono-eye sensor can be adjusted in four directions for expressive display options Dual Configuration: Build either Gaia's or Ortega's unit from the same kit using the included marking stickers for unit-specific emblems Advanced Articulation: Ball-and-socket joints throughout enable dynamic action poses including the Jet Stream Attack formation Included Equipment and Accessories Parts to build Rick Dom (Gaia's or Ortega's unit) Giant Bazooka Heat Saber x2 Interchangeable hand parts Lead wire and anchors (for electromagnetic harken) Marking stickers Specifications Brand Bandai Spirits Series Mobile Suit Gundam GQuuuuuuX Line HGGQ (High Grade Gundam GQuuuuuuX) Kit Number #09 Scale 1/144 Model Number MS-09 Mobile Suit Name Gaia's/Ortega's Rick Dom (GQ) Pilots Gaia, Ortega (Black Tri-Stars) Bandai SKU 2773826 UPC 4573102688682 Product Type Model Kit Material PS Plastic, Lead Wire Country of Origin Japan Release Date September 2025