Products

The Bandai SD BB Senshi #366 Wing Gundam (EW) is a non-scale super-deformed model kit based on the XXXG-01W Wing Gundam from Mobile Suit Gundam Wing: Endless Waltz. This SD kit features a unique transformation from MS mode to flight mode and includes a BB Senshi-exclusive combinable super weapon formed from its shield, energy pack, beam rifle, and additional armaments. Recommended for beginner builders, this snap-fit kit features simplified proportions and requires no glue or painting to complete. Piloted by Heero Yuy in the Endless Waltz story, the Wing Gundam is one of the most iconic mobile suits in the Gundam franchise.Key Features MS-to-Flight Mode Transformation: Converts between standard mobile suit mode and flight mode for dynamic display options BB Senshi Combinable Super Weapon: Shield, energy pack, beam rifle, and additional weapons merge into an exclusive large combined weapon unique to this BB Senshi version New Polycap Construction: Built with updated polycaps for enhanced posability beyond typical SD kits Pre-colored Parts: Molded in the Wing Gundam's signature white, red, and blue color scheme with foil stickers for detail markings Display Stand Included: Comes with a dedicated pedestal for flight mode posing Snap-fit Assembly: No glue or painting required - simply snap parts together for a finished model Included Equipment and Accessories Runners x4 Beam Rifle Shield Energy Pack Display Stand Foil Marking Stickers x1 Assembly Instructions Specifications Brand Bandai Series Mobile Suit Gundam Wing: Endless Waltz Line SD Gundam BB Senshi Kit Number 366 Scale Non-scale Model Number XXXG-01W Mobile Suit Name Wing Gundam (EW) Pilot Heero Yuy Bandai SKU 2134960 UPC 4573102558817 Product Type Model Kit Material PS (Polystyrene), PE (Polyethylene) Country of Origin Japan Release Date June 2011

The Bandai SD Gundam BB Senshi #367 NZ-666 Kshatriya is a non-scale super-deformed model kit based on the imposing Newtype mobile suit from Mobile Suit Gundam Unicorn. This chibi rendition of the Kshatriya stands approximately 120mm tall and features deployable binders, replaceable sub-arms, and two BB-original transformation modes. This is a beginner-friendly snap-fit kit with simplified SD proportions, ideal for builders of all skill levels. Piloted by Marida Cruz of the Sleeves, the Kshatriya is one of the most iconic mobile suits from the Gundam Unicorn series.Key Features Deployable Binders: All four binders can be opened and closed via built-in articulation gimmicks, recreating the Kshatriya's signature silhouette. Replaceable Sub-Arms: Swap parts to deploy the sub-arms hidden within each binder for combat display poses. BB Original Modes: Transforms into Crow Mode and Beast Mode, unique configurations exclusive to the BB Senshi version. Bonus Loto Mini Kit: Includes a buildable SD Loto support unit that can switch between tank and mobile suit forms, standing approximately 53mm tall. Beam Sabers: Comes with alternate beam saber accessories for additional weapon display options. Tetron and Foil Stickers: Includes both tetron and foil sticker sheets for enhanced color separation and realistic detailing without painting. Snap-Fit Assembly: No glue or paint required - color-molded parts snap together for a complete build straight out of the box. Included Equipment and Accessories Kshatriya SD main body 4 deployable binders Replaceable open sub-arm parts Beam saber accessories Loto mini kit (tank and mobile suit modes) Foil sticker sheet x 1 Tetron sticker sheet x 1 Assembly instruction manual Specifications Brand Bandai Series Mobile Suit Gundam Unicorn Line SD Gundam BB Senshi Kit Number 367 Scale Non-scale Model Number NZ-666 Mobile Suit Name Kshatriya Pilot Marida Cruz Height Approximately 120mm Runner Count 7 Bandai SKU 5060675 / 2139164 UPC 4573102606754 Product Type Model Kit Material PS Plastic Country of Origin Japan Release Date August 2011 (2020 new box reissue)

The Bandai SD BB Senshi #382 MSN-04 Sazabi is a non-scale super-deformed model kit based on Char Aznable's iconic mobile suit from Mobile Suit Gundam: Char's Counterattack. This updated BB Senshi rendition features a design modeled after the G-Dome exhibit in Gundam Front Tokyo, offering impressive detail and gimmicks for an SD-class kit. Recommended for beginner builders, this snap-fit kit requires no glue or painting for a complete build. The Sazabi is one of the most recognizable antagonist mobile suits in the Universal Century timeline, serving as the final personal machine of the legendary Red Comet.Key Features Movable Mono-Eye: The mono-eye sensor moves horizontally for expressive posing and display options. Funnel Effect Parts: Includes effect parts to recreate funnel shooting scenes with up to three funnels deployed in mid-flight. Detailed Escape Pod: The cockpit escape pod is recreated in detail, reflecting the Sazabi's in-universe design. Beam Tomahawk with Beam Effect: The beam tomahawk includes a yellow beam effect part and can be stored in the shield. Beam Shot Rifle: Includes the Sazabi's signature oversized beam shot rifle as a handheld weapon. Funnel Containers: The backpack-mounted funnel storage pods are faithfully recreated with individual funnel parts. Snap-Fit Assembly: No glue or paint required for assembly, with multi-color molded runners for accurate color separation. Included Equipment and Accessories MSN-04 Sazabi SD body Beam Shot Rifle Shield Beam Tomahawk Beam Tomahawk effect part Funnel parts (x3) Funnel effect parts Stickers Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam: Char's Counterattack Line SD Gundam BB Senshi Kit Number BB382 Scale Non-scale (SD) Model Number MSN-04 Mobile Suit Name Sazabi Pilot Char Aznable Bandai SKU 2202201 UPC 4573102582805 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date 2013

The Bandai SD Gundam Cross Silhouette #20 X-EX01 Gundam Calibarn is a non-scale super deformed model kit from the Mobile Suit Gundam: The Witch from Mercury series. This kit reproduces the iconic rainbow-colored shine of the Calibarn's shell units when operating beyond Permet Score 8, and includes both SD and CS frames so builders can choose their preferred head and body proportions. Recommended for beginner builders, the SDCS line features snap-fit construction with no glue or painting required. The X-EX01 Gundam Calibarn is piloted by Suletta Mercury near the finale of Season 2, and its design evokes a witch riding a broom when wielding the Variable Rod Rifle.Key Features Dual Frame System: Includes both SD frame and CS frame for the upper body, allowing you to select your preferred head and body proportions. Permet Score 8 Rainbow Shell Units: Clear and colored parts reproduce the iridescent glow that covers the Calibarn's body when exceeding Permet Score 8. Non-Emitting Shell Mode: Smoked black parts replicate the non-emitting shell unit, with sticker options for the red Permet Score 5 state. Bit-On Form: Bit Staves can be attached to hardpoints across the body to recreate the Bit-On Form from the series. Variable Rod Rifle: The signature weapon features Quadra Thrusters at the rear that can be opened and closed. High Maneuver Mode: Leg parts feature movable components that can be transformed into high maneuver mode. Interchangeable Hand Parts: Includes weapon-gripping hands and flat expressive palm parts for left and right hands. Included Equipment and Accessories Variable Rod Rifle x1 Escutcheon x1 Beam Saber (grip) x2 Hand parts x1 set Sticker sheet x1 Specifications Brand Bandai Spirits Series Mobile Suit Gundam: The Witch from Mercury Line SD Gundam Cross Silhouette (SDCS) Kit Number 20 Scale Non-scale Model Number X-EX01 Mobile Suit Name Gundam Calibarn Pilot Suletta Mercury Number of Runners 8 Bandai SKU 2704786 UPC 4573102666918 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date June 2024

The Bandai SD Cross Silhouette Shin Getter is a non-scale snap-fit plastic model kit based on the iconic super robot from the Getter Robo anime franchise created by Go Nagai and Ken Ishikawa. This kit brings Shin Getter 1 into the SD Cross Silhouette line, allowing builders to display it in either a cute chibi SD form or a taller, more aggressive CS (Cross Silhouette) proportioned form by swapping internal frames. The SD frame is included, while the CS frame is sold separately. Ideal for beginners, this kit snaps together without glue or paint and features color-separated molding for an accurate finished look.Key Features Dual Display Modes: Build Shin Getter in either the compact SD (Super Deformed) chibi proportions or the taller CS (Cross Silhouette) proportions using interchangeable internal frames Highly Posable: Completed model features excellent articulation for dynamic action poses Getter Tomahawk: Includes Shin Getter's signature oversized axe weapon - the largest weapon accessory in the SDCS line Getter Battle Wing: Iconic wing accessory included for recreating dramatic flight poses from the series Snap-Fit Assembly: No glue or cement required - parts snap together securely with color-separated runners minimizing the need for paint Interchangeable Hand Parts: Multiple hand options included for varied weapon-holding and posing configurations Included Equipment and Accessories Shin Getter 1 SD body assembly (8 runners) SD frame Getter Tomahawk Getter Battle Wing Interchangeable hand parts Sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Getter Robo Line SD Cross Silhouette (SDCS) Scale Non-scale Character Shin Getter 1 Pilot Ryoma Nagare Approximate Height 4.5 inches (approx. 11.5 cm) Bandai SKU 2478103 / 5057696 UPC 4573102576965 Product Type Plastic Model Kit (Snap-fit) Material PS (Polystyrene), PE (Polyethylene) Country of Origin Japan Release Date June 2019

The Bandai SD Gundam BB Senshi #376 AGE-FX Gundam AGE-FX is a non-scale super deformed model kit from the Mobile Suit Gundam AGE series. This kit captures the ultimate evolution of the AGE system Gundam in a charming SD format, featuring 14 translucent green C-Funnels, a detachable Core Fighter, and a Stungle Rifle with interchangeable firing modes. As a BB Senshi kit, it is ideal for beginners, with simple snap-fit construction and only 80 pieces across 6 runners. The AGE-FX is piloted by Kio Asuno in the third generation arc of Mobile Suit Gundam AGE, where it served as the pinnacle of Earth Federation mobile suit development.Key Features 14 Translucent C-Funnels: Includes 6 large and 8 small C-Funnels molded in transparent green plastic, all detachable from the mobile suit Detachable Core Fighter: The backpack can be removed and transformed into the AGE-FX's Core Fighter with a movable cockpit Stungle Rifle with Mode Change: The Stungle Rifle can be converted between Normal and Charge Modes via minor parts rearrangement and can be held in either hand Ball-Joint Articulation: Extensive ball-and-socket joints at the neck, shoulders, elbows, wrists, waist, hips, and ankles provide posing flexibility Snap-Fit Assembly: 80 pieces across 6 runners (A, B, C, D, E, PC303) with no glue or painting required Color-Correcting Stickers: Includes foil stickers to recreate the mobile suit's on-screen color scheme right out of the box Figure Base Included: Comes with a figure base that can hold extra parts for display Included Equipment and Accessories Gundam AGE-FX C-Funnel (Large) x6 C-Funnel (Small) x8 Core Fighter Stungle Rifle Daidal Bazooka parts Figure base Foil sticker sheet Instruction manual Specifications Brand Bandai Series Mobile Suit Gundam AGE Line SD Gundam BB Senshi Kit Number 376 Scale Non-scale Model Number AGE-FX Mobile Suit Name Gundam AGE-FX Pilot Kio Asuno Mechanical Designer Kanetake Ebikawa Runners 6 (A, B, C, D, E, PC303) Total Pieces 80 Bandai SKU BAS2183601 UPC 4543112785404 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date November 2012

The Bandai SD Gundam Cross Silhouette #18 Tornado Gundam is a non-scale snap-fit model kit from the SD Gundam G Generation video game series. This kit marks the first-ever Gunpla release of the Tornado Gundam, a mysterious prototype mobile suit originally featured in the SNES game SD Gundam GX. Suitable for beginners, the SDCS line features simplified SD proportions with snap-fit assembly and pre-colored plastic, requiring no glue or paint. The Tornado Gundam was first revealed at the HOBBY NEXT PHASE 2022 AUTUMN event and represents a revival of the SDCS line after a multi-year hiatus.Key Features Dual Frame System: Includes both CS (Cross Silhouette) and SD frames, allowing builders to choose between taller CS proportions or classic compact SD proportions. Deployable Gatling Guns: The gatling guns mounted on the arms can be swapped between normal and deployed states using interchangeable parts. Connectable Beam Sabers: The two included beam sabers can be connected together to recreate the double-bladed beam saber attack from the G Generation games. Movable Binder Units: Each section of the binder units on the back can be independently posed for dynamic displays. Ball-Joint Articulation: Features ball-and-socket joints at the head, shoulders, wrists, waist, and ankles for versatile posing. Action Base Compatible: Can be mounted on any Bandai Action Base for aerial display poses (sold separately). Included Equipment and Accessories Tornado Gundam runner parts SD Frame CS (Cross Silhouette) Frame Beam Rifle x1 Beam Saber x2 Deployed Gatling Gun parts x1 set Hand parts set (weapon-holding pair, trigger-finger right, open-palm pair) Foil sticker sheet Instruction manual Specifications Brand Bandai Spirits Series SD Gundam G Generation / SD Gundam GX Line SD Gundam Cross Silhouette (SDCS) Kit Number 18 Scale Non-scale Mobile Suit Name Tornado Gundam Bandai SKU 2657990 UPC 4573102651174 Product Type Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date April 22, 2023

The Bandai SD Gundam Cross Silhouette Hello Kitty / Zaku II is a non-scale collaboration model kit from the SD Gundam Cross Silhouette line, combining the MS-06F Zaku II from Mobile Suit Gundam with the beloved Sanrio character Hello Kitty. This unique two-pack allows builders to display the Zaku II and Hello Kitty separately or combine them into a hybrid Hello Kitty wearing Zaku II armor. This beginner-friendly kit features snap-fit assembly with no glue required, making it accessible to builders of all skill levels. It is the second collaboration release between the Gunpla and Hello Kitty brands.Key Features Two-in-One Build: Includes parts to build both an SD Zaku II and a Hello Kitty figure, or combine them into a unique Hello Kitty / Zaku II hybrid form. Hello Kitty-Themed Sprues: Features specially shaped sprues - one in the form of Hello Kitty's head and another resembling her signature ribbon bow. Cross Silhouette Compatible: The Zaku II can be built with the optional Cross Silhouette Frame (sold separately) for taller proportions and enhanced articulation at the elbows, thighs, and knees. Poseable Hello Kitty: Hello Kitty can hold the included apple accessory and be displayed in a sitting pose on the apple-shaped pedestal. Glossy Finish Parts: The Zaku II runners feature a glossy plastic finish for added visual depth without painting. Snap-Fit Assembly: No glue or painting required - color-molded parts snap together for a complete build straight from the box. Abundant Zaku Weapons: Comes with a full arsenal of Zaku II armaments including machine gun, bazooka, heat hawk, and missile pods. Included Equipment and Accessories SD Zaku II parts Hello Kitty figure parts Hello Kitty / Zaku II hybrid combination parts Zaku II helmet Zaku machine gun x 1 Zaku bazooka x 1 Heat hawk x 1 Missile pod set x 1 Apple x 1 Apple-shaped display pedestal x 1 Foil sticker sheet x 1 Tetron sticker sheet x 1 Specifications Brand Bandai Spirits Series Mobile Suit Gundam x Hello Kitty Line SD Gundam Cross Silhouette Scale Non-scale Model Number MS-06F Mobile Suit Name Zaku II Collaboration Character Hello Kitty (Sanrio) Bandai SKU 5061030 UPC 4573102610300 Product Type Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date December 2020

The Bandai SD Gundam Cross Silhouette Hello Kitty/MS-06S Char's Zaku II is a non-scale collaboration model kit that brings together Sanrio's Hello Kitty and the iconic red Zaku II from Mobile Suit Gundam. This two-pack set allows builders to construct a super-deformed Char's Zaku II and a Hello Kitty figure separately, or combine both into a unique hybrid form. As an SD-class snap-fit kit, it is suitable for beginners and requires no glue or painting for a complete build. This is the second wave of Bandai's Hello Kitty x Gunpla collaboration series, featuring the Char Aznable custom color variant with gloss-injected red parts.Key Features Hello Kitty x Gundam Collaboration: A crossover set pairing Sanrio's Hello Kitty with the MS-06S Char's Zaku II from Mobile Suit Gundam in super-deformed proportions. Three Display Options: Build the SDCS Char's Zaku II and Hello Kitty as separate figures, or combine parts from both to create a Hello Kitty/Zaku II hybrid form. Gloss-Injected Red Parts: The Zaku II runners feature gloss-injected red plastic for Char's signature color scheme, adding visual depth without painting. Unique Hello Kitty Sprues: Two Hello Kitty-themed runners shaped like her head and ribbon bow contain all parts needed for the Hello Kitty figure. Poseable Hello Kitty Figure: Hello Kitty can hold the included apple accessory and can sit in a seated pose on the apple-shaped display base. Snap-Fit Assembly: No glue or painting required - color-molded parts snap together for an easy and enjoyable build experience. Full Zaku Weapon Loadout: Includes Zaku machine gun, Zaku bazooka, heat hawk, helmet, and missile pod set for the SDCS Zaku II. Included Equipment and Accessories SDCS MS-06S Char's Zaku II parts Hello Kitty figure parts Hybrid combination parts Helmet x 1 Heat Hawk x 1 Zaku Machine Gun x 1 Zaku Bazooka x 1 Missile Pod Set x 1 Apple x 1 Apple-shaped display base x 1 Foil sticker sheet x 1 Tetron sticker sheet x 1 Specifications Brand Bandai Spirits Series Mobile Suit Gundam / Hello Kitty Line SD Gundam Cross Silhouette (SDCS) Scale Non-scale Model Number MS-06S Mobile Suit Name Char's Zaku II / Hello Kitty Pilot Char Aznable Bandai SKU 5061029 UPC 4573102610294 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date December 2020

The Bandai SD Gundam EX-Standard #001 RX-78-2 Gundam is a non-scale Super Deformed model kit from the original Mobile Suit Gundam series. As the first entry in the EX-Standard line, this kit features improved limb proportions and enhanced articulation compared to earlier SD kits, along with cross-compatibility with HG 1/144 kits. This snap-fit kit is ideal for beginners and requires no glue or paint to complete. The RX-78-2 Gundam, piloted by Amuro Ray, is the iconic mobile suit that turned the tide of the One Year War in favor of the Earth Federation.Key Features Super Deformed Proportions: Chibi-style design with a large head and compact body, standing approximately 3 inches (8 cm) tall when assembled. Improved Articulation: The EX-Standard line offers stronger limb proportions and increased range of motion compared to previous SD Gundam kits. HG Cross-Compatibility: Weapons and accessories can be combined to create new armaments for use with 1/144 scale HG Gundam kits. Color-Molded Parts: Molded in multiple colors for an accurate look straight out of the box with minimal painting required. Foil Marking Stickers: Included sticker sheet adds extra color details and markings to the finished model. Snap-Fit Assembly: No glue required - all parts snap together for easy construction. Included Equipment and Accessories 5 runners (color-molded plastic parts) Beam rifle Beam saber Shield Foil marking sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam Line SD Gundam EX-Standard Kit Number 001 Scale Non-scale Model Number RX-78-2 Mobile Suit Name Gundam Pilot Amuro Ray Bandai SKU 5065615 UPC 4549660026419 Product Type Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date September 2015

The Bandai SD Gundam EX-Standard #002 GAT-X105+AQM/E-X01 Aile Strike Gundam is a non-scale super-deformed model kit from Mobile Suit Gundam SEED. This snap-fit kit features improved proportions and articulation over previous SD lines, along with a unique weapon-combination gimmick that allows its accessories to be combined and used with 1/144 HG kits. Ideal for beginners, the SD EX-Standard line offers simplified construction with multi-color molded parts and foil stickers for added detail. The Aile Strike Gundam is the most versatile configuration of the Earth Alliance's GAT-X105 Strike Gundam, piloted by Kira Yamato and later Mu La Flaga. Key Features Super-Deformed Proportions: Stylized SD design with improved range of motion compared to conventional SD Gundam kits, enabling a variety of dynamic poses. HG-Compatible Weapon Gimmick: Weapons and accessories can be combined and shared with 1/144 HG Gundam kits, expanding customization possibilities. Multi-Color Molding: Parts are molded in multiple colors for accurate appearance right out of the box with minimal painting required. Foil Marking Stickers: Includes a detailed sheet of foil stickers to add color-correcting details and markings. Aile Striker Backpack: Equippable Aile Striker pack with wing and thruster detail, faithfully recreating the mobile suit's signature silhouette. Snap-Fit Assembly: No glue required - all 38 pieces snap together easily across 5 runners for a quick, satisfying build. Included Equipment and Accessories Aile Strike Gundam SD figure 57mm High Energy Beam Rifle Anti-Beam Shield Aile Striker Backpack Beam Saber Foil marking stickers Instruction manual Specifications Brand Bandai Series Mobile Suit Gundam SEED Line SD Gundam EX-Standard Kit Number 002 Scale Non-scale (Super Deformed) Model Number GAT-X105+AQM/E-X01 Mobile Suit Name Aile Strike Gundam Pilot Kira Yamato / Mu La Flaga Runners 5 (A, B, C, D, PC303) Total Pieces 38 Completed Height Approximately 3 inches Bandai SKU 0196728 UPC 4573102575982 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date 2015 (Overseas) / July 2016 (Japan)

The Bandai SD Gundam EX-Standard #003 GN-001 Gundam Exia is a non-scale, super-deformed plastic model kit based on the lead mobile suit from Mobile Suit Gundam 00. Piloted by Setsuna F. Seiei, the Gundam Exia is a close-combat specialist deployed by the paramilitary organization Celestial Being to eliminate armed conflict worldwide. This beginner-friendly snap-fit kit requires no glue or painting, making it an ideal introduction to Gunpla for newcomers and younger builders. Originally released in October 2015, the EX-Standard line delivers improved proportions and articulation over earlier SD Gundam kits.Key Features Improved SD Proportions: The EX-Standard line features stronger limb proportions compared to previous SD kits, enabling a wider range of dynamic poses. Multi-Color Molding: Pre-colored plastic runners replicate the Gundam Exia's iconic white, blue, and red color scheme right out of the box. HG Cross-Compatibility: Weapons and accessories can be combined and shared with 1/144 scale HG Gundam kits for expanded customization options. Weapon Combination Gimmick: All included weapons can be combined into a unique configuration exclusive to the EX-Standard line. Foil Marking Stickers: Included foil stickers add extra color details and markings to enhance the finished model's appearance. Snap-Fit Assembly: No glue, paint, or specialized tools required - all parts snap together for a straightforward build experience. Included Equipment and Accessories GN Sword GN Long Blade GN Short Blade Shield Beam Saber Foil Marking Stickers Instruction Manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam 00 Line SD Gundam EX-Standard Kit Number 003 Scale Non-scale Model Number GN-001 Mobile Suit Name Gundam Exia Pilot Setsuna F. Seiei Completed Height Approximately 8 cm (3 inches) Number of Runners 4 (A1, A2, B, C) + PC303 Total Pieces 40 Bandai SKU 5065618 / BAN202753 UPC 4573102656179 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date October 2015

The Bandai SD Gundam EX-Standard #004 XXXG-00W0 Wing Gundam Zero (EW) is a Super Deformed snap-fit plastic model kit based on the iconic mobile suit from Mobile Suit Gundam Wing: Endless Waltz. This kit features improved SD proportions with full-bodied limbs, enhanced articulation, and the ability to share weapons and accessories with HG 1/144 scale kits via 3mm joint compatibility. It is an excellent choice for beginners looking for a quick, enjoyable build that captures one of Gundam's most beloved designs in a charming chibi style. Piloted by Heero Yuy in the series, the Wing Gundam Zero (EW) is renowned for its angelic wings and devastating Twin Buster Rifle.Key Features Improved SD Proportions: Full-bodied limbs and more balanced proportions compared to older SD kits, while retaining signature Super Deformed charm. Twin Buster Rifle: Included rifle can be held combined for the iconic firing pose or separated into two individual rifles, one for each hand. Beam Saber: A beam saber accessory is included for close-combat posing options. Angel Wings: The Wing Gundam Zero's signature wing design is faithfully recreated in SD form with sharp molded detail. HG 1/144 Compatibility: Weapons and accessories feature 3mm joint connections, allowing parts to be shared with HG 1/144 scale Gunpla kits. Snap-Fit Assembly: No glue required - color-molded runners allow for an accurate build straight from the box with minimal painting needed. Foil Stickers: Included sticker sheet adds color accents, markings, and detail highlights such as eyes and vents. Included Equipment and Accessories XXXG-00W0 Wing Gundam Zero (EW) SD main body Twin Buster Rifle (combinable/separable) Beam saber Foil sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam Wing: Endless Waltz Line SD Gundam EX-Standard Kit Number 004 Scale Non-scale (SD) Model Number XXXG-00W0 Mobile Suit Name Wing Gundam Zero (EW) Pilot Heero Yuy Approximate Height 8 cm (approximately 3 inches) Bandai SKU 2688289 UPC 4573102656186 Product Type Model Kit Material PS (Polystyrene) Plastic Country of Origin Japan Release Date July 2016

The Bandai SD Gundam EX-Standard #005 RX-0 Unicorn Gundam (Destroy Mode) is a non-scale Super Deformed model kit from the Mobile Suit Gundam Unicorn series. This kit recreates the iconic Unicorn Gundam in its activated Destroy Mode with enhanced SD proportions and improved articulation compared to previous SD lines. It is ideal for beginners, featuring snap-fit assembly with no glue or paint required. The RX-0 Unicorn Gundam is piloted by Banagher Links and serves as the protagonist mobile suit of Mobile Suit Gundam Unicorn.Key Features Super Deformed Proportions: Stands approximately 4 inches (10.16cm) tall with stylized SD proportions emphasizing articulation and poseability Destroy Mode Design: Recreates the Unicorn Gundam's activated Destroy Mode with exposed psycho-frame details Multi-Color Molding: Color-molded runners minimize the need for painting to achieve an accurate appearance HG Parts Compatibility: Weapons and accessories can be combined with 1/144 scale HG Gundam kits for expanded customization Foil Marking Stickers: Included sticker sheet adds extra colors and markings for additional detail Snap-Fit Assembly: No glue required - parts snap together for an easy and enjoyable build experience Included Equipment and Accessories Runners x4 (multi-color injection plastic) Beam Rifle Shield Foil marking sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam Unicorn Line SD Gundam EX-Standard Kit Number 005 Scale Non-scale Height Approximately 4 inches (10.16cm) Model Number RX-0 Mobile Suit Name Unicorn Gundam (Destroy Mode) Pilot Banagher Links Bandai SKU 2688331 UPC 4573102656193 Product Type Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date November 2015

The Bandai SD Gundam EX-Standard #006 ZGMF-X20A Strike Freedom Gundam is a non-scale super deformed plastic model kit based on Mobile Suit Gundam SEED Destiny. This SD EX-Standard kit features improved proportions and newly designed joints for enhanced posability compared to earlier SD Gundam lines. Recommended for beginner builders, this snap-fit kit requires no glue or paint and assembles quickly with simplified construction. The Strike Freedom Gundam is piloted by Kira Yamato and serves as the successor to the ZGMF-X10A Freedom Gundam in the series.Key Features SD EX-Standard Design: Stylish super deformed proportions with improved articulation over conventional SD kits Multi-Color Molding: Pre-colored plastic runners minimize the need for painting Snap-Fit Assembly: No glue required - parts snap together for easy construction Foil Marking Stickers: Included sticker sheet adds extra color detail and markings HG Compatibility: Weapons and parts can be swapped with 1/144 scale HG Gundam kits for custom builds Included Weapons: Comes with beam rifle, beam saber, and shield accessories Included Equipment and Accessories Strike Freedom Gundam parts (5 runners) Beam rifle Beam saber Shield Foil sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam SEED Destiny Line SD Gundam EX-Standard Kit Number 006 Scale Non-scale Model Number ZGMF-X20A Mobile Suit Name Strike Freedom Gundam Pilot Kira Yamato Bandai SKU 2688332 UPC 4573102656209 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date July 2016 (Japan)

The Bandai SD Gundam EX-Standard #007 MBF-P02 Gundam Astray Red Frame is a non-scale Super Deformed snap-fit model kit from the Gundam SEED Astray series. This kit recreates the fan-favorite Red Frame with enhanced SD proportions, multi-color molded runners, and its iconic Gerbera Straight katana. The SD EX-Standard line is ideal for beginners, requiring no glue or paint and assembling quickly for an enjoyable build experience. The MBF-P02 Gundam Astray Red Frame is piloted by Junk Guild member Lowe Guele and is one of five prototype Astray mobile suits developed by Orb in the Cosmic Era timeline.Key Features SD EX-Standard Proportions: Super Deformed design with an emphasis on improved proportion and articulation over previous SD lines, standing approximately 8cm tall. Multi-Color Molded Runners: Four color-separated runners accurately recreate the Red Frame's distinctive red and white color scheme with minimal painting needed. Gerbera Straight Katana: Includes the iconic katana weapon with a scabbard that attaches to the side waist armor for storage or drawn poses. Shield Accessory: Comes with a shield that can be mounted on either arm for dynamic posing options. HG Weapon Compatibility: Weapon parts can be combined and used with 1/144 scale HG Gundam kits, a unique gimmick of the SD EX-Standard line. Ball-Joint Articulation: Features ball-joint connections at the neck, waist, shoulders, elbows, hips, and feet for a range of posing possibilities. Foil Marking Stickers: Included sticker sheet adds extra color detail and markings to complete the kit's appearance. Included Equipment and Accessories MBF-P02 Gundam Astray Red Frame SD figure Gerbera Straight katana Katana scabbard Shield Foil marking sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam SEED Astray Line SD Gundam EX-Standard Kit Number 007 Scale Non-scale Model Number MBF-P02 Mobile Suit Name Gundam Astray Red Frame Pilot Lowe Guele Height Approximately 8cm (3 inches) Bandai SKU 5057994 UPC 4573102656216 Product Type Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date July 2016

The Bandai SD Gundam EX-Standard #008 GN-0000 00 Gundam is a non-scale Super Deformed snap-fit model kit from the SD Gundam EX-Standard line. Based on the titular mobile suit from Mobile Suit Gundam 00, the kit recreates the 00 Gundam with improved articulation and refined SD proportions compared to earlier SD Gundam kits. This beginner-friendly kit requires no glue or paint and assembles easily, making it an excellent entry point for new builders. The 00 Gundam is piloted by Setsuna F. Seiei and serves as the successor to the GN-001 Gundam Exia in the second season of Mobile Suit Gundam 00.Key Features Enhanced SD Articulation: Improved range of motion over conventional SD Gundam kits, allowing for a variety of dynamic poses. Multi-Color Molding: Parts come pre-molded in multiple colors for accurate appearance straight out of the box. Dual GN Drives: Features a GN Drive mounted on each shoulder, faithfully representing the 00 Gundam's Twin Drive System. GN Sword II Weapons: Includes two GN Sword II accessories for display in melee combat poses. Shield Accessories: Comes with shield parts for added detail and posing options. HG 1/144 Compatibility: Weapons and accessories can be shared with High Grade 1/144 scale Gundam kits for expanded customization. Foil Marking Stickers: Includes foil stickers for additional color accents and markings. Included Equipment and Accessories 4 runners (molded in multiple colors) 2 GN Sword II weapons Shield parts Foil marking sticker sheet Instruction manual Specifications Brand Bandai Series Mobile Suit Gundam 00 Line SD Gundam EX-Standard Kit Number 008 Scale Non-scale Model Number GN-0000 Mobile Suit Name 00 Gundam Pilot Setsuna F. Seiei Approximate Height 3 inches (approx. 8 cm) Bandai SKU 5057995 Product Type Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date July 2016

The Bandai SD Gundam EX-Standard #009 ZGMF-X42S Destiny Gundam is a super-deformed snap-fit model kit based on the titular mobile suit from Mobile Suit Gundam SEED Destiny. This kit features stylish SD proportions with newly designed joints for improved posability, along with a weapon-combination gimmick and parts compatible with HG 1/144 kits. Ideal for beginners, this simplified build requires no glue or painting and assembles from just 39 pieces across 5 runners. The Destiny Gundam was piloted by Shinn Asuka and served as ZAFT's most advanced mobile suit during the Second Alliance-PLANT War.Key Features Enhanced SD Proportions: Redesigned super-deformed styling with improved articulation over previous SD Gundam lines, allowing a wide variety of action poses. HG-Compatible Weaponry: All weapons and accessories can be swapped with High Grade 1/144 Gunpla kits for expanded customization options. Weapon Combination Gimmick: The high energy beam rifle, long-range beam cannon, and anti-ship sword can be combined for a unique combined-weapon display. Anti-Ship Sword Back Mount: The MMI-714 Arondight beam sword can be mounted on the kit's back for storage poses, replicating the mobile suit's in-show configuration. Snap-Fit Assembly: No glue or painting required - color-molded PS and PE plastic parts snap together for a quick, beginner-friendly build. Foil Sticker Sheet: Includes foil stickers for color-accurate markings and detail straight out of the box. Included Equipment and Accessories MA-BAR73/S High Energy Beam Rifle M2000GX High Energy Long-Range Beam Cannon MMI-714 Arondight Beam Sword Foil sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam SEED Destiny Line SD Gundam EX-Standard Kit Number 009 Scale Non-scale Model Number ZGMF-X42S Mobile Suit Name Destiny Gundam Pilot Shinn Asuka Total Pieces 39 Runner Count 5 (A, B, C, D, PC303) Bandai SKU 5057996 UPC 4573102579966 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date April 2016

The Bandai SD Gundam EX-Standard #010 ASW-G-08 Gundam Barbatos is a non-scale super deformed model kit based on the lead mobile suit from Mobile Suit Gundam: Iron-Blooded Orphans. This kit recreates the Barbatos with improved SD proportions and enhanced articulation compared to conventional SD kits, and its weapons are compatible with HG 1/144 kits for cross-line customization. Ideal for beginners, this snap-fit kit requires no glue or painting and assembles quickly with pre-colored parts. Piloted by Mikazuki Augus, the Gundam Barbatos is one of 72 Gundam Frames from the Calamity War, known for its versatility and raw combat power.Key Features Enhanced SD Proportions: Redesigned with improved articulation and refined proportions for a more dynamic appearance than traditional SD kits. Full Weapon Loadout: Includes the iconic mace, a long-range cannon, and a sword that can be mounted on the back for storage. HG Weapon Compatibility: Weapons and accessories can be combined with HG 1/144 Gundam kits for expanded customization options. Snap-Fit Assembly: Pre-colored, multi-color molded runners allow assembly without glue or paint for a great-looking finished model. Foil Marking Stickers: Included sticker sheet adds extra color detail and markings to complete the kit's appearance. Compact Display Size: Stands approximately 3 inches (8 cm) tall when completed, perfect for desktop or shelf display. Included Equipment and Accessories SD EX-Standard Gundam Barbatos model kit parts Mace Long-range cannon Sword (back-mountable) Foil marking sticker sheet Runner x 5 Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam: Iron-Blooded Orphans Line SD Gundam EX-Standard Kit Number 010 Scale Non-scale (SD) Model Number ASW-G-08 Mobile Suit Name Gundam Barbatos Pilot Mikazuki Augus Height Approximately 3 inches (8 cm) Bandai SKU 2688282 UPC 4573102656247 Product Type Model Kit Material PS (Polystyrene), PP (Polypropylene) Country of Origin Japan Release Date May 2016 (original release)

The Bandai SD Gundam EX-Standard #011 Try Burning Gundam is a non-scale Super Deformed model kit based on the TBG-011B Try Burning Gundam from Mobile Suit Gundam Build Fighters Try. This chibi-proportioned kit places a strong emphasis on articulation and enhanced SD proportions, and includes fiery Houou Haoh-Ken effect parts that can also be used with full-size HG 1/144 kits. Recommended for beginner builders, this snap-fit kit features simplified construction with color-molded parts and foil stickers for easy color recreation.Key Features Enhanced SD Articulation: Newly designed joints provide improved posability over traditional SD kits, allowing dynamic martial arts poses fitting the Try Burning Gundam's fighting style. Fiery Effect Parts: Includes Houou Haoh-Ken flame effect parts that can be combined to create a unique flame whip weapon. HG Compatibility: Weapons, accessories, and effect parts can be swapped with High Grade 1/144 Gunpla kits for cross-line customization. Snap-Fit Assembly: No glue required - all parts snap together for easy, tool-minimal construction with 39 total pieces. Color-Molded Runners: Multi-color runner technology provides accurate color separation straight from the box, supplemented by foil stickers for detail markings. Polycap Joint System: Supported by PC303 polycaps for reliable articulation and part stability. Included Equipment and Accessories Try Burning Gundam SD body Houou Haoh-Ken flame effect parts 4 Runners (A, B, C, PC303) Foil sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam Build Fighters Try Line SD Gundam EX-Standard Kit Number 011 Scale Non-scale Model Number TBG-011B Mobile Suit Name Try Burning Gundam Pilot Sekai Kamiki Height Approximately 8.5 cm Piece Count 39 Bandai SKU 2688283 UPC 4573102656254 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date February 2017 (Japan)