Gundam Gunpla

The GN-0000+GNR-010 00 Raiser (aka 00 Raiser) is the combined form of GN-0000 00 Gundam and GNR-010 0 Raiser introduced in season 2 of Mobile Suit Gundam 00. Typically co-piloted by Setsuna F. Seiei and Saji Crossroad, the mobile suit could also be solely piloted by Setsuna.

The GN-009 Seraphim Gundam (aka Seraphim Gundam, Seraphim) is the successor to GN-004 Gundam Nadleeh introduced in Mobile Suit Gundam 00 season two. It was piloted by Tieria Erde.

The GNW-003 Gundam Throne Drei (aka Gundam Throne Unit Three, Throne Drei, Drei) is a mobile suit that appeared in Mobile Suit Gundam 00 and is piloted by Nena Trinity.

The GNW-003 Gundam Throne Drei (aka Gundam Throne Unit Three, Throne Drei, Drei) is a mobile suit that appeared in Mobile Suit Gundam 00 and is piloted by Nena Trinity.

The GNW-001 Gundam Throne Eins (aka Gundam Throne Eins, Throne Eins, Eins) is the lead mobile suit of Team Trinity and piloted by Johann Trinity in season one of Mobile Suit Gundam 00.

The MSJ-06II-A Tieren Ground Type (aka Tieren Ground Type, Tieren) is a mobile suit introduced in season one of Mobile Suit Gundam 00.

The MBF-P02 Gundam Astray Red Frame is a Mobile Suit introduced in the manga Mobile Suit Gundam SEED Astray. It is piloted by Junk Guild member Lowe Guele. The MBF-P02 Gundam Astray Red Frame is one of five identical prototype mobile suits developed by Orb using stolen data from the Earth Alliance's G Project. Its original concept was to be a MS that could be piloted by Naturals, and it was eventually loaded with an incomplete Natural-use OS. Most of the technology from the G Project is successfully copied with the exception of Phase Shift armor. In its place, the Gundam Astrays' designers made the machines out of a lighter foam metal compound, with minimal armor over the frame. This made the mobile suits lighter and faster than their G Project counterparts. All five prototype Gundam Astrays are also designed with a backpack that can be lowered to the back skirt armor, allowing the mounting of additional equipment on the back. The Red Frame initially had the same armament as the other prototype Gundam Astrays, consisting of two head-mounted "Igelstellung" 75mm multi-barrel CIWS, two backpack-mounted beam sabers for close combat, a Type 71 beam rifle and a physical shield. Red Frame's pilot, Lowe Guele, eventually acquired another armament - the "Gerbera Straight" katana. To wield this katana effectively, the Red Frame's OS was modified. Lowe also created a 150 meter long version of this sword, however it cannot be carried by the Red Frame in its normal configuration. Lowe also designed a set of upgrades for Red Frame, but they are used to repair Gai's damaged MBF-P03 Gundam Astray Blue Frame instead. When there is a need for flight capability, Red Frame can be fitted with the Flight Unit and when it needs to dive underwater, it can use the Salvage Unit. After his return from Mars, Lowe developed the Caletvwlch and the Ddraig Head. The former is a multifunctional handheld equipment, while the latter is a special head unit designed to complement the former. Like other mobile suits that use beam weapons, the Red Frame is equipped with hand plugs to exchange energy with weapons the suit carries. Although considered a misuse of the system, the energy from the hand plug can be manipulated into an energy ball and discharged. This is often used by Lowe as an emergency weapon, for example to temporarily blind enemies. The mysterious organization, Librarian Works, later created a copy of the Red Frame. Known as Replica Red Frame, it has the same capabilities as the real Red Frame.

The TBG-011B Try Burning Gundam is a Gunpla introduced in the anime Gundam Build Fighters Try. Piloted by Sekai Kamiki, it is an upgrade of the BG-011B Build Burning Gundam. Compared to its predecessor, the BG-011B Build Burning Gundam, the Try Burning has reinforced joint armor and is installed with a new system known as the "Burning Burst System" to maximize its Plavsky Particle emission. Similar to the Build Burning, the Try Burning's transparent blue parts are for storing Plavsky Particles for later emission, and more of them are hidden below the armor. Although the suit has no shield, it can defend against projectile and ranged beam attacks using its elbow armor like its predecessor. The suit can also release Plavsky Particles from it soles in an attempt to protect itself from attacks below. Normally, these Plavsky Particles are used for propulsion, much like those released from the Gunpla's back. When Sekai assimilates with Try Burning, its performance improves by more than 3 times and the transparent blue parts turn orange from the change in the Plavsky Particles' color. Furthermore, all the Plavsky Particles stored in the suit can be released at once, and this causes the entire Try Burning to be engulfed in flames. The suit also gains the ability to generate a barrier during assimilation. The weakness of assimilation is that the damages sustained by the Gunpla are reflected onto Sekai. Before the finals of the U-19 Championship, the Try Burning was remodeled so that its polycaps are interchangeable with that of its teammates. This allows the damaged Try Burning to be repaired using its teammates parts, allowing it to fight properly during the overtime battle as the team's representative.

The Espossito Gamma now joins the "30Minutes Missions" (30MM) lineup from Bandai in red -- the second-place finisher in the "30MM Color Variation Grand Prix"! This unit is equipped with a mechanism to make it a basis for customization; it can be transformed into its flight form by parts replacement, and it comes with armor and armed parts that can be endlessly customized. 

Alto is the first main mecha kit of the 30 Minutes Missions line. It is the standard EXAMACS (Extended Armament and Module Assemble and Combine System) from the Earth United Nations.

The ZGMF-2025/F GELGOOG Menace is a mobile suit introduced in the animated film Mobile Suit Gundam SEED Freedom. A mass-produced mobile suit produced by ZAFT as the successor design to the ZGMF-1000 ZAKU Warrior.

The Black Knight Squad is a Main Antagonist faction introduced in the animated film Mobile Suit Gundam SEED Freedom. The Black Knight Squad is the personal guard of the Kingdom of Foundation Queen Aura Maha Khyber, comprised of her governing administrators, military leader, and her royal guards.

The XXXG-01L2 Gundam Livelance Heaven (ガンダムリヴランスへブン Gandamu Rivuransu Hebun?) is a Gunpla that appears in the ONA Gundam Breaker Battlogue and the video game Gundam Breaker Mobile. Based primarily on the Gundam Deathscythe Hell, this Gunpla is customized with a design and color palette reminiscent of an angel, the opposite of the original's "God of Death" motif. When deployed the active cloak now resembles a six-winged seraphim.

A Musha Gundam from a new generation who is clad in Kirahagane boldly joins the battle.Kirahagane is an application of in-mold decoration technology where layers of film are applied during injection molding. Take a close look at the contrast created by the transparent effects achieved with clear parts and the colorful designs of Kirahagane! Kirahagane is used for the sword. The unsheathing stance can be reproduced thanks to the range of articulation in the elbows. Parts that work with SDW HEROES ONMITSU GUNDAM AERIAL (sold separately) are included!

"Gundam Aerial" x " ONMITSU GUNDAM", the famous character of yesteryear x The revival of KirahaganeThe long-awaited new-generation ninja, filled with new and old elements, has arrived!Kirahagane is an application of in-mold decoration technology where layers of film are applied during injection molding.The kit comes with a wide variety of equipment.The Shuriken can be recreated by rearranging the armaments.Internal frames specialized for mobility are built in.The range of articulation of the elbow allows for the two-sworded posture.Parts that work with "SDW HEROES TENKAMUSODAISHOGUN" (sold separately) are included.

ExAMACS units with enhanced command communication abilities developed by the Byron Forces around the same time as the Portanova. They are equipped with a multifunctional radar placed on top of their backpacks that allows units to instantly analyze combat situations. They are specifically designed for local battles and have highly expandable forearms and legs with enhanced bulletproof capabilities. The range of power of the standardly equipped handguns can be changed by using expansion modules.

The GFAS-X1 Destroy Gundam is a transformable heavy assault mobile suit introduced in the anime Mobile Suit Gundam SEED Destiny. As its name implies, the GFAS-X1 Destroy Gundam is built for only one purpose: massive destruction. Nearly three times larger than an average MS, it can destroy an enemy mobile suit by simply stepping on it. To accomplish its goal of mass destruction, the unit is equipped with a large array of weapons that allow it to singlehandedly devastate a large city like Berlin or take out an army of mobile suits and support crafts. Its designation, "GFAS-X", stands for "Gressorial Fortress Armament Strategic - EXperimental".Despite its large size, the Destroy Gundam requires only a single pilot unlike its predecessor, the YMAG-X7F Gells-Ghe. However, the pilot has to be a Biological CPU or someone with similar enhancements. The Destroy Gundam is classified as a transformable mobile suit, and usually launches in its MA mode which hovers over the ground at low altitudes through the use of backpack mounted thrusters. It can transform into MS mode by rotating its lower half 180 degrees, lowering the arms and flipping the backpack to the back.The suit's backpack is equipped with three weapons, including two twin barrel high-energy beam cannons, 20 thermal plasma composite cannons mounted around the backpack's circumference, and four 6-tube multipurpose missile launchers. Other weapons include head-mounted 200mm energy cannon and four 75mm CIWS, three chest-mounted 1580mm multi-phase energy cannons, and two detachable arms each equipped with a beam cannon and 5-barrel hand beam gun. The detachable arms function like DRAGOON Pods, allowing the suit to attack its target at any range, regardless of obstacles standing in the way. Aside from its vast array of offensive weaponry, the Destroy Gundam also carries defensive equipment in the form of three positron reflector shields, one in the backpack and usable only in MA mode, and two on the detachable arms.Due to its bulk, the Destroy Gundam has poor mobility and serves more as a movable gun platform. This weakness is often exploited by enemy units, particularly high mobility mobile suits piloted by ace pilots, to take the Destroy Gundam down by closing in and using close combat beam weaponry. Alternatively, DRAGOON Pods armed with beam spikes (such as the large DRAGOON Pods of the ZGMF-X666S Legend Gundam) can penetrate the Destroy's Positron Reflectors and quickly tear through the machine.

The AGP-X1/E3 Alus Earthree Gundam (アルスアースリィガンダム?) is a variant of the Alus Core Gundam that appears in Gundam Build Divers Re:RISE and is piloted by Alus. It can also be piloted by the Guard Eye, and in this state, it is known as Eldora Earthree Gundam. The Alus Earthree Gundam was created independently by Alus through analyzing Hiroto's PLANETS System and is developed based on the combat data of the Earthree Gundam. It thus has the same exact structure as the Earthree Gundam and is likewise formed through the docking of the central Alus Core Gundam with the Alus Earth Armor. Its capabilities are also similar to the Earthree Gundam's, being most effective when used with a basic battle style and is capable of handling any situations. Like the Alus Core Gundam, the sensor on the Alus Earthree Gundam's head glows red when it is controlled directly by Alus. This glow is not present when the machine is operated by the Guard Eye, and in this state, it is known as Eldora Earthree Gundam.

The PFF-X7II/U7 Uraven Gundam (ユーラヴェンガンダム?) is a Gunpla introduced in Gundam Build Divers Re:RISE. A variant of the PFF-X7II Core Gundam II, it is built and piloted by Hiroto Kuga. It is known as PFF-X7/U7 Uraven Gundam when used with the PFF-X7 Core Gundam. A form of the Core Gundam II docked with the Uranus Armor, the Uraven Gundam specializes in long-range sniping and was built under the concept of enabling high-precision sniping in all situations. The Earthree Gundam was chosen as its base design due to its all-round features, and was tuned to specialize in shooting while having abilities that made it more than competent in regular combat. The Uraven Gundam can deploy Sensor Bits equipped with multi-sensors around itself, enabling it to perform ultra-high-precision sniper attacks with its Beam Shoot Rifle U7. The Uraven Gundam originally has the Core Gundam as its central unit, the current use of the more powerful Core Gundam II enhances its overall power.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.