Mobile Suit Gundam

The MS-06 Zaku II (ザク II?) is a line of mobile suits introduced in the Mobile Suit Gundam television series. The successor to the first fielded MS, the MS-05 Zaku I, the Zaku II improved on everything the previous model offered. It was faster, more durable, had a superior reactor, and could be fitted with more weapons. The Zaku II was the mainstay of the Zeon military for most of the One Year War. Even after the MS-09B Dom and MS-09R Rick Dom began to replace it on the front lines, the Zaku II still remained the most numerous mobile suit in Zeon's armed forces. As such, the Zaku II formed the backbone of the Zeon remnants behind Operation Stardust and some were even seen as late as U.C. 0088 in both AEUG and Neo Zeon service during the Gryps Conflict and the First Neo Zeon War. The Zaku II was also a common aggressor unit used during training for Earth Federation Forces pilots.

The RX-77-2 Guncannon was a mobile suit used by the Earth Federation Forces introduced in the TV anime Mobile Suit Gundam. A middle-range support mobile suit developed simultaneously with the RX-78 Gundam and the RX-75 Guntank as part of Operation V, the Guncannon adopted the same Core Block System as the other two units. Due to its role as an artillery support unit, the Guncannon's design prioritized durability over mobility, and it was not equipped with any melee weapons. However, its armor was particularly heavy, capable of surviving a direct hit from an MS-09R Rick Dom's giant bazooka.Similar to the Guntank, the Guncannon's main weapons were a pair of shell-firing cannons, chosen for their reliability over beam weapons. These cannons could be optionally swapped out for a pair of spray missile launchers. Unlike the Guntank, however, the Guncannon's generator output allowed it to equip a beam rifle. It was also equipped with a pair of head-mounted Vulcan guns and hand grenades for attacking enemy strongholds.Though its head design appeared to be simpler than the Gundam's head, the Guncannon's sensor system was in fact more complicated than the Gundam's due to its need to engage in artillery warfare. This "twin eyes with goggles" sensor design were later inherited by the RGM-79 GM. While the Guncannon's mobility was adversely affected by its weight, it was still comparable to that of the Zeon's MS-06 Zaku II. Furthermore, the backpack thrusters have sufficient thrust to enable jumping maneuvers under gravity for a short period of time.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.

The MS-07B Gouf is a mass production close-quarters combat ground mobile suit. It was first featured in the anime Mobile Suit Gundam. The MS-07B Gouf is designed specifically for Earth-based, close-quarter MS combat. It featured much-improved mobility with a powerful backpack and leg-mounted thrusters for jet-assisted jumps based on the YMS-08A High Mobility Test Type. For armaments, it has the 5-barrel 75mm machine gun in its left hand and a heat rod, which could be used as a superheated slicing weapon or as a grappling weapon with a powerful electric shock effect. It also had a powerful heat sword stored within a shield, and could also use the standard Zaku II weapons, such as the 120mm machine gun or the 280mm bazooka.The Gouf outclassed the MS-06 Zaku II in terms of speed, power output, and melee combat ability, but its overall performance was not great enough to be justified by its increased cost. The Gouf's production was cut short by the development of a more cost efficient unit, the more powerful and nimble MS-09B Dom. Despite its very short production run, several variations were produced in limited numbers and it was still deployed across the world alongside Zakus and Doms. One customized unit was piloted by Visch Donahue, which had the original 5-fingered machine gun left hand replaced by a normal manipulator hand, in its place a 3-barrel 35mm machine gun was mounted on the left forearm.

The MS-07B-3 Gouf Custom is an upgraded variant of the MS-07B Gouf that was introduced shortly after the MS-09B Dom. It first appeared in the anime Mobile Suit Gundam: The 08th MS Team. During the deployment of the Gouf, its limited combat versatility became evident with its design concept of emphasis on hand-to-hand combat. Numerous disadvantages surfaced during operation on the battlefield, such as lack of flexibility due to the Gouf's fixed armament. The Gouf would be completely redesigned as the MS-07B-3, which was an improvement over the original. The Gouf Custom was designed with improved close quarters shooting and detachable weapons. It was designed primarily for ace pilots preferring a lighter mobile suit that could leap and jump as opposed to the heavy, yet effective MS-09B Dom.The Gouf Custom featured multiple changes to the MS-07B, including the elimination of the awkward five finger 75mm machine guns, replacing it with a normal manipulator and a wrist mounted 3-barrel 35mm Machine gun. The coil-like heat rod is replaced with a magnetic grappler wire that connects and disables an enemy with an electric charge rather than damaging them. The grappler wire could also be used as a repelling line that could slow or even halt the descent of a falling Gouf in the right conditions. The shield of the Gouf was modified so that it not only stored the Gouf's heat sword but is also capable of carrying a 75mm gatling gun, greatly enhancing the mobile suit's fire power.

The YMS-15 Gyan is a mobile suit that appears in the TV anime Mobile Suit Gundam. The YMS-15 Gyan was developed by the Zimmad company in the late stages of the One Year War for the Principality of Zeon's second phase main mobile suit development project. It was designed with exceptional close combat ability in anticipation of melee combat against the Earth Federation's mobile suits. When needed, the Gyan can receive fire support from the MS-09B Doms or MS-09R Rick Doms. However, its focus on close combat resulted in lower versatility and this contributed to its loss to the Zeonic's MS-14 Gelgoog.A Gyan (depending on sources, this is either the sole unit produced or one of three produced units) was later customized for use by Colonel M'Quve of the Mobile Assault Force. A powerful beam saber serves as Gyan's primary weapon, it also has a shield with 60 needle missiles and 25 hide bombs (space mines) for laying traps. The appearance of the Gyan, with its silver armor and Pickelhaube helmet design, has a strong resemblance to a medieval armored knight. This is further emphasized by M'Quve's fighting style, which is heavily based on fencing.

The MS-06S Zaku II Commander Type is a mobile suit introduced in Mobile Suit Gundam. After repeated engagements since the start of the One Year War, the regular Zaku II had already become insufficient for ace pilots. In order to make effective use of the mobile suit's reserves of power, this mobility-enhanced Zaku II for commanders was hastily developed. The Zaku II Commander Type has an antenna on the head for enhanced communication capabilities and to visually distinguish squad-leaders or higher ranking pilots from other squad-members or lower ranking pilots. Commanders are also allowed to paint their machine in personal colors.It also features a powerplant with higher output that gave the Zaku II Commander Type greater thrust and acceleration. This allows it to move at speeds 30% higher than that of the standard Zaku II. However, since the amount of propellant has not been changed from the standard type, it would naturally run out of propellant quickly when maneuvering at full speed. Despite this limitation, the Zaku II Commander Type proved to be incredibly dangerous in the hands of the ace pilots it was assigned to, such as the "Red Comet" Char Aznable, who sank five Magellan-class battleships in the Battle of Loum.

The RGM-79 Powered GM is a test-use mobile suit introduced in the OVA Mobile Suit Gundam 0083: Stardust Memory. Known pilots include Dick Allen. The RGM-79 Powered GM was a testbed unit developed for the Gundam Development Project. Based on the RGM-79C GM Type C, it was equipped with an early development version of the RX-78GP01 Gundam GP01 "Zephyranthes"'s a large backpack, as well as a pair of new model shock absorber units with integrated auxiliary power on its knees. Thanks to these modifications, its thrust was increased by 30%. Due to being a testbed unit, it was not given a new model number. Since the units assigned to Torrington Base were destroyed and the Gundam Development Project was later erased from Federation records, the details of its modifications and its specifications were all lost.

The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long-range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras, and image stabilizers for precision, and long-range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long-range sniping capabilities. The suit is one of the few capable of accurately firing MS-sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boast superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow-up models. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.

The MS-07B-3 Gouf Custom is an upgraded variant of the MS-07B Gouf that was introduced shortly after the MS-09B Dom. It first appeared in the anime Mobile Suit Gundam: The 08th MS Team. During the deployment of the Gouf, its limited combat versatility became evident with its design concept of emphasis on hand-to-hand combat. Numerous disadvantages surfaced during operations on the battlefield, such as a lack of flexibility due to Gouf's fixed armament. The Gouf would be completely redesigned as the MS-07B-3, which was an improvement over the original. The Gouf Custom was designed with improved close-quarters shooting and detachable weapons. It was designed primarily for ace pilots preferring a lighter mobile suit that could leap and jump as opposed to the heavy, yet effective MS-09B Dom.The Gouf Custom featured multiple changes to the MS-07B, including the elimination of the awkward five-finger 75mm machine guns, replacing it with a normal manipulator and a wrist-mounted 3-barrel 35mm Machine gun. The coil-like heat rod is replaced with a magnetic grappler wire that connects and disables an enemy with an electric charge rather than damaging them. The grappler wire could also be used as a repelling line that could slow or even halt the descent of a falling Gouf in the right conditions. The shield of the Gouf was modified so that it not only stored the Gouf's heat sword but is also capable of carrying a 75mm Gatling gun, greatly enhancing the mobile suit's firepower.

The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. What is Ver.Ka In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

The MS-09R Rick Dom (リック・ドム Rikku Domu?) is a mass production space combat mobile suit and a variant of the MS-09 Dom. It was introduced in the TV anime Mobile Suit Gundam. Proposed by Zimmad as one of the competing designs for Zeon's next generation space-use mobile suit in the middle stage of the One Year War, the MS-09R was a variant of the ground-use MS-09 Dom. The MS-09 was chosen as the developmental base due to its good basic design. Its block structure was a major factor that enabled its specifications to be easily changed without modifications to its basic frame.The MS-09R removed the ground-use equipment of its predecessor and replaced them with space-use equipment, increasing its propellant capacity and its vernier thruster output. The thermonuclear jet engines on its feet were replaced with thermonuclear rocket engines. Its total spec, including cost and ease of manufacture, surpassed that of the MS-06R-2 Zaku II High Mobility Type, the most advanced mobile suit at the time.In addition to retaining the Dom's armaments, including its signature Giant Bazooka, some units under Dozle Zabi were said to be equipped with the experimental Beam Bazooka. Though the Rick Dom's generator output was insufficient to use beam weapons, the Beam Bazooka did not require energy from the mobile suit to be used. However, the weapon never reached mass production due to frequent explosions, though it was rumored that an improved variant of the Rick Dom capable of using the Beam Bazooka safely existed.

Principality of Zeon Char Aznable's Mobile Suit MS-06S Char's Zaku II is a mobile suit featured in the Mobile Suit Gundam: The Origin manga and its OVA adaptation. It was piloted by Char Aznable during the One Year War. At long last the HGUC Char's Zaku has been updated as part of the 40th Anniversary of GunPla! Pair it alongside HGUC #191 RX-78-2 to recreate scenes from the 1979 TV Anime series! Special features include design elements that allows expressive articulation via structural and material part usage. The skirt armor can be built using either soft material to recreate its one piece apperance in the TV show or be built with individual pieces to allow for a greater mechanical appearance. Includes Zaku Machine Gun, Heat Hawk, and Bazooka that can be stored on skirt armor. Only product with affixed official Bluefin and Bandai Namco label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance