COLLECTIONS
Availability
Price
Mobile Suit Gundam

HG 1/144 HGGTO MS-06C/R6 Zaku II Type C-6/R6
Bandai
$23.00The MS-06C-6/R6 Zaku II is a mobile suit featured in the Mobile Suit Gundam: The Origin manga. This variant of the MS-06 Zaku II was used by Char Aznable's crew on the Falmer.The Zaku II units deployed during the first battles of the One Year War, such as the Clash of Loum, were mainly early production models known as the Type C. The Type C units were developed to be utilized in space and were later customized into the Type C-5 and Type C-6. Both Types C-5 and C-6 had cockpit hatches shaped differently from the Type C and Type F (which appeared after Type C-6), and a laser gun was mounted on the left side of the chest.. The Type C-6 also had a Vulcan gun added to the right side of the chest.. Overall, the Type C-6 has enhanced armor and weaponry and is produced in limited numbers.Various armaments were proposed and developed for the Zaku II, such as the optional parts referred to as the R6 kit. The R6 kits were mainly used by the Type C-5, C-6, and F units, and consisted of two weapons: a 20mm machine gun pod that was mounted on the forearm and 30mm Vulcan guns mounted on the left and right sides of the chest. An "/R6" was added to the model numbers of Zaku II units equipped with one or both of the R6 kit weapons.

HG 1/144 HGGTO RX-78-02 Gundam
Bandai
$28.00The RX-78-02 Gundam (RX-78-02 ガンダム?) is the titular mobile suit of the Mobile Suit Gundam: The Origin manga. It also appears briefly in the Mobile Suit Gundam: The Origin OVA and the Mobile Suit Gundam: The Origin Advent of the Red Comet television series, and again in the Mobile Suit Gundam: Cucuruz Doan's Island movie. It was piloted by Amuro Ray during the One Year War. Its estimate generator output was from 1000kW to 1400kW, its target output was to be at least 150% of the RCX-76.The operation tests of the RX-78-02, a prototype MS of the Earth Federation, were carried out in secret, but civilian Amuro Ray coincidentally became its pilot when Zeon Forces assaulted Side 7.The RX-78-02 utilizes its wide array of portable weapons such as its beam rifle and hyper bazooka. It also has fixed weaponry such as two shoulder magnums on the left shoulder, a gatling gun on the right shoulder, and a forearm gatling gun on its left arm. It's also possible to swap a beam saber with an optional armament known as the shoulder cannon.Furthermore its unable to transform its Beam Sabers to Beam Javelins, its Gundam Hammer doesn't exist, nor does it use the Core Block System until it was upgraded to have one at Jaburo.As the war progressed to its latter stages, the RX-78-02 was reconfigured into its Late Type/Middle Type form. When the fighting was moved into space a majority of its fixed weapons were removed and swapped with extra thrusters for better mobility and gate shaped armor on the shoulders. Several fixed weapons were removed such as the arm vulcan, the two shoulder magnums, shoulder Gatling gun, and the shoulder cannon not being used more often.

MG 1/100 RGM-79(G) GM
Bandai
$32.00The RGM-79[G] GM Ground Type is a ground based predecessor to the RGM-79 GM. It first appeared in Mobile Suit Gundam: The 08th MS Team. An early prototype of the Earth Federation Forces' mobile suit mass production project, the GM Ground Type was developed before the RX-78-2 Gundam's operational data was recovered. Even though it was only able to operate on Earth, its internal parts were all tuned for ground combat, and it was equipped with Luna Titanium armor, causing its mobility, maneuverability, and general performance to surpass the later RGM-79 GM.It is said that its performance under gravity even rivals that of the RX-78.The GM Ground Type was a simplified version of the RX-79[G] Gundam Ground Type, and produced using the same production line.Compared to the Gundam Ground Type, the GM Ground Type omitted the chest-mounted Vulcan gun and multi-launcher, the weapon container mount on the backpack, and was equipped with a less powerful generator.It also did not incorporate parts from the RX-78 series, though its head unit was similar in specs to that of the RX-78's.Since it was produced after the production format was established, its ease of production, ease of maintenance and availability of parts were all greater than its predecessor.Due to its use of Luna Titanium alloy, it was unsuited for mass production and produced in limited numbers. However, the GM Ground Type was important in establishing the EFF's mobile suit production framework. The operational data it collected contributed to the development of later mobile suits.Finally, the basic structure of its head was later inherited by the RGM-79 GM, becoming the iconic face of Federation mass production mobile suits.

MG 1/100 MS-06S Zaku II
Bandai
$43.00The MS-06S Zaku II Commander Type (aka MS-06S Zaku II, MS-06S, S Type) is a mobile suit introduced in Mobile Suit Gundam. One such unit was famously piloted by Char Aznable. Developed in response to veteran pilots' request for a high performance unit, the MS-06S Zaku II Commander Type was far more mobile than its predecessor, the MS-06F Zaku II, but was also far more difficult to control. Compared to the F Type, the S Type's vernier nozzles were enlarged, and the output of its main thrusters were increased by 30% while retaining the same size. To make space for the improved thrusters and enlarged propellant tanks, various automatic control systems of the F Type were removed. While this reduced S Type's operability, it also enabled experienced pilots to disable many unnecessary limiters and push the mobile suit to its structural limit.Other changes from the F Type included the S Type's generator being 5% lighter, and its armor composition and structure were improved, improving its overall power-weight ratio. Finally, the S Type were all equipped with a head-mounted multi-blade antenna. Though the antenna itself was identical to those found on the F Type, the structure at its base was different, giving it improved communications and enemy detection capabilities. Despite having many special internal components, the S Type still shared 80-90% of its parts with the F Type, making it easy to resupply and maintain. This also meant that like the F Type, it could easily be modified to operate in space or under gravity.

MG 1/100 RGM-79SP GM Sniper II
Bandai
$40.00The RGM-79SP GM Sniper II (ジム・スナイパーII Jimu sunaipā II?) is a variant of the RGM-79G GM Command and first appeared in Mobile Suit Gundam 0080: War in the Pocket. Based on the GM Command series and the concept of the RGM-79SC GM Sniper Custom deployed earlier in the war, the GM Sniper II is a high-performance machine capable of using specialized weaponry at maximum capacity for ultra-long range engagements. It was the last and most advanced of the Federation's line of GM Sniper mobile suits during the One Year War. It was also one of the last GM-type units to be developed during the war.The GM Sniper II's specialized head visor has built-in compound sensors with specialized laser sensors, powerful zoom cameras and image stabilizers for precision, long range targeting. During operation, goggles cover the main camera and other elements of the head sensor array, and together with head unit coolers, they physically eliminate noise interference and enhance long range sniping capabilities. The suit is one of the few capable of accurately firing MS sized sniper rifles that used physical projectiles. Unlike beam weapons, these rifles are not affected by magnetic forces or solar winds, but only a few were made.Operationally, the GM Sniper II was used to eliminate priority targets such as base ships and command machines from beyond the range of conventional weapons. However, the suit is not just a long-range specialist. Like the highly regarded GM Sniper Custom deployed earlier, the GM Sniper II maintains versatility while having enhanced performance. It has sufficient specifications for mid-range support and close combat, and can use almost any existing MS armament. In terms of overall performance, it was one of the few machines to match the RX-78-2 Gundam, which was the standard against which other Federation suits were held to. In fact, its specifications on paper were superior to the Gundam's, and it was one of the few Federation production suits that could take on the MS-14A Gelgoog in a one-on-one fight.The armor of the GM Sniper II is reinforced with pieces of Luna Titanium alloy, and mobility is improved via sub-thrusters in various locations and a total of six large vernier thrusters – two in the backpack and four on the legs. The four large vernier thrusters in the legs have high output to make up for the shortfall in the output of the backpack thrusters, which are designed for precision, and boasts superb pitching performance (rapid up and down movements). The suit's main verniers are built along the machine's core axis, an arrangement also used in later MS such as the MSA-003 Nemo and RGM-89 Jegan. This is an effective way to boost mobility while maintaining the same basic silhouette. The suit's torso is an upgraded version of the GM Command's, and has superior specifications with additional waste heat and electrical noise suppression material. Its arms are constructed with the same parts used in other GM models, but with highly tuned servos and actuators and an updated driver.Only very few GM Sniper II were manufactured due to it being developed late in the war. Production costs were also undeniably higher than standard mass-produced machines, and apart from a few prototypes built for test purposes, the suit did not have any follow up models. The GM Sniper II was however used as the basis for the RX-80, a mobile suit that became the base unit for the Project Pale Rider. It is believed that the GM Sniper II's development team later worked on the Nemo, but this is unconfirmed. Due to the GM Sniper II's excellent performance and shooting capabilities, it continued to be used for sniping missions long after the war ended. Units deployed by the Titans have a dark blue color scheme and updated features such as a new optical camera system for long-range shooting and improved sensor radius.

RG 1/144 MSM-07S Z'Gok
Bandai
$31.00The MSM-07S Z'Gok Commander Type is a variant of the MSM-07 Z'Gok created by the Principality of Zeon during the One Year War.An improved, higher performance model of the Z'Gok, it has higher reactor output, better maneuverability and a change in armor materials. It eventually became the standard Z'Gok model.

HG 1/144 HGUC RGM-79G GM Ground Type
Bandai
$20.00The RGM-79[G] GM Ground Type is a ground based predecessor to the RGM-79 GM. It first appeared in Mobile Suit Gundam: The 08th MS Team. An early prototype of the Earth Federation Forces' mobile suit mass production project, the GM Ground Type was developed before the RX-78-2 Gundam's operational data was recovered. Even though it was only able to operate on Earth, its internal parts were all tuned for ground combat, and it was equipped with Luna Titanium armor, causing its mobility, maneuverability, and general performance to surpass the later RGM-79 GM.It is said that its performance under gravity even rivals that of the RX-78.The GM Ground Type was a simplified version of the RX-79[G] Gundam Ground Type, and produced using the same production line.Compared to the Gundam Ground Type, the GM Ground Type omitted the chest-mounted Vulcan gun and multi-launcher, the weapon container mount on the backpack, and was equipped with a less powerful generator.It also did not incorporate parts from the RX-78 series, though its head unit was similar in specs to that of the RX-78's.Since it was produced after the production format was established, its ease of production, ease of maintenance and availability of parts were all greater than its predecessor.Due to its use of Luna Titanium alloy, it was unsuited for mass production and produced in limited numbers. However, the GM Ground Type was important in establishing the EFF's mobile suit production framework. The operational data it collected contributed to the development of later mobile suits.Finally, the basic structure of its head was later inherited by the RGM-79 GM, becoming the iconic face of Federation mass production mobile suits.

PG 1/60 Perfect Grade UNLEASHED RX-78-2 Gundam
Bandai
$296.00Introducing the PG 1/60 Perfect Grade Unleashed RX-78-2 Gundam, a pinnacle of Gunpla engineering that celebrates over four decades of Gundam excellence. This model kit offers an unparalleled building experience, meticulously designed to replicate the iconic RX-78-2 Gundam with exceptional detail and articulation. Key Features: Scale and Detail: At 1/60 scale, this model stands as a testament to precision, featuring intricate internal structures and external armor that mirror the original design. Advanced Articulation: Boasting over 90 points of articulation, including functional pistons and sliding mechanisms, it allows for dynamic and realistic poses. Multi-Material Construction: The kit incorporates diverse materials such as aluminum parts for the head vulcans and backpack verniers, metallic 3D stickers, and photo-etched parts, enhancing both durability and aesthetic appeal. LED Lighting System: Equipped with color-changing LEDs in the head and chest, as well as an LED beam saber, it brings the Gundam to life with various states of combat or maintenance. Note: Requires LR41 batteries (sold separately). Innovative Assembly Process: Designed to emulate the construction of a real robot, the assembly progresses from the internal skeletal frame to the external armor, providing a comprehensive and immersive building experience. Box Contents: RX-78-2 Gundam model parts Shield Two beam sabers Beam rifle LED components Sayla Mass figure Three Amuro Ray figures Magnet set Aluminum parts Stickers Metallic stickers Comprehensive instruction manual This Perfect Grade Unleashed kit is a must-have for both seasoned builders and newcomers, offering a challenging yet rewarding project that culminates in a stunning display piece. Elevate your Gunpla collection with this exceptional model that embodies the spirit and innovation of the Gundam universe.

RG 1/144 MSN-02 Zeong
Bandai
$66.00The MSN-02 Zeong (ジオング Jiongu) is a prototype mobile suit appearing in the anime Mobile Suit Gundam. It was first piloted by the "Red Comet" Char Aznable. Developed by the Principality of Zeon at the A Baoa Qu space fortress during the One Year War, the Zeong was built exclusively for Newtype pilots. It initially had the model number "MS-16X" and was developed based on the data of multiple experimental units. The Zeong was also the first mobile suit to use the Psycommu system, which allowed a Newtype pilot to utilize its wire-guided remote-controlled forearms for all-range attack effectively. Each forearm was built with five mega particle cannons in its fingers. The Zeong also has three more mega particle cannons on its body, two in the waist and one in the head.The Zeong was expected to be around 35m tall when fully completed, making it much larger than most mobile suits of the time. Its large size was attributed to the difficulties in miniaturizing the Psycommu system. Though another account suggested that it was due to the need for larger generators to power its thirteen mega particle cannons. In the end, this mobile suit was only 80% complete when it was deployed, thus its lack of legs and exposed upper arms. Although the legs would aid in the AMBAC System, their omission did not hinder the Zeong from performing at 100% combat capacity, since two rocket thrusters were installed at where the legs were supposed to be.Although the Zeong was developed for Newtypes, it could also be operated by normal pilots. In this situation, the mobile suit would be controlled by a pilot in the torso cockpit and a gunner in the head cockpit. The two cockpits were connected by a traversal tube. In contrast, a single Newtype pilot could fully operate the Zeong from either one of the cockpits, though due to the mobile suit's prototype nature, its activation and initialization could only be done in the torso cockpit. In order to ensure the recovery of its data and pilot, especially if the pilot was a Newtype, the head also doubled as an escape pod and could detach from the main body when necessary.

RG 1/144 RX-78-2 Gundam
Bandai
$31.00The RX-78-2 Gundam is the titular mobile suit of Mobile Suit Gundam television series. Part of the RX-78 Gundam series, it was built in secret on Side 7. The Gundam would turn the tide of war in favor of the Earth Federation during the One Year War against the Principality of Zeon. It was primarily piloted by Amuro Ray. The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium Alloy, its frame was both lighter than that of Zeon's mass-produced mobile suits and much sturdier, able to shrug off a MS-06 Zaku II's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zakus. The Gundam would engage in most battles with its beam rifle, making it the first mobile suit to have firepower equivalent to a battleship's beam cannons. In addition, it made use of two beam sabers, blades of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance.The Gundam also used more conventional weaponry; it could launch rockets with a "Hyper Bazooka", the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan guns, as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the "Gundam Hammer" - a large weapon similar to a flail which could be swung at enemies to deal crushing damage. The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the "Hyper Hammer". Lastly, it wielded a shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot, Amuro Ray, would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Baoa Qu to improve its reaction times, the joints of the Gundam were given a Magnet Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used on Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the machine be too heavily damaged and gives the pilot a chance to escape from battle. Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull. Officially, it is called a prototype, but it is also said to be more of a custom-made machine that is finished with high quality materials and the best technology.

HG 1/144 HGGTO MS-05S Zaku I
Bandai
$22.00MS-05S Char's Zaku I (MS-05S ザクⅠ(シャア専用機)?) is a mobile suit featured in the Mobile Suit Gundam: The Origin manga, its OVA adaptation and Mobile Suit Discovery . It was Char Aznable's own customized MS-05 Zaku I Anticipating a war of independence, the Principality of Zeon forces made their preparations for the outbreak of war by mass-producing the MS-05 Zaku I. The MS-05 Zaku I was armed with ranged weapons and a shield affixed to its forearm, and in close combat, it was designed to carry out ramming attacks using the armor attached to its left shoulder. However, a few ideas for revisions were suggested based on mobility test data. A new type of shield mounted on the right shoulder was developed, which could protect the machine over a wider area. And for offense, a new type of left shoulder armor was introduced, with spikes installed for increased damage during ramming attacks. In addition to the standard MS machine gun (drum magazine type) and Type A1 MS bazooka, the MS machine gun (belt-fed type) was developed, which had increased ammunition thanks to a feed mechanism mounted on the mobile suit's back. This new equipment, which eliminated the problems of the MS-05 Zaku I, was intended for use by the improved MS-06 Zaku II that was being developed at a rapid pitch. However, since the war of Zeon independence broke out just before the MS-06 Zaku II entered full-scale mass production, some units of the MS-05 Zaku I were fitted with this MS-06 Zaku II eq

HG 1/144 HGGTO MS-04 Bugu (Ramba Ral Custom)
Bandai
$22.00The MS-04 Bugu (MS-04 ブグ?) is a mobile suit featured in the Mobile Suit Gundam: The Origin and Mobile Suit Gundam: The Origin MSD Cucuruz Doan's Island manga, the Mobile Suit Gundam: The Origin OVA, its television recut, and the Mobile Suit Discovery design series. Developed by Zeonic from the YMS-03 Waff , tests were conducted at the Dark Colony in U.C. 0077 . In U.C. 0078, Ramba Ral's Bugu fought in the Battle of Mare Smythii . The development of the mobile suit took a huge step forward thanks to the compact fusion reactor and fluid pulse system designed by Dr. Torenov Y. Minovsky, resulting in the birth of the prototype YMS-03 Waff. The MS-04 Bugu was completed using data gathered with the Waff, and it was designed with a focus on its mobility, maneuverability, and ease of production as a weapon, making this the first machine capable of handling genuine combat. To improve its mobility, the power pipes that transmitted energy as part of the fluid pulse system were attached to the outside of its armor, and the increased supply of the energy used to drive its limb joints gave it very high maneuverability. However, as is often the case in the development of high-performance prototypes, it was designed with no regard for ease of production. With its high production cost, it was unsuited for mass production, and the role of official mass-produced machine was given to the redesigned MS-05 Zaku I. Though the Bugu never entered mass production, several units were built .

HG 1/144 HGGTO RGM-79HC GM Guard Custom
Bandai
$23.00The RGM-79HC GM Guard Custom is a mobile suit from Mobile Suit Gundam THE ORIGIN Mobile Suit Discovery. The GM Guard Custom is a mobile suit with improved defense capabilities based on the RGM-79SC GM Sniper Custom. Its personal armament, the Guardian Shield, is composed of five layers of composite armor made of four different alloy materials. It is armed with a beam spray gun and beam daggers that produces a short blade, while a visor with a compound sensor is placed on the head. Despite having high performance, the suit is hard to control and passed to highly skilled pilots. The GM Guard Custom is primarily used for guarding the fleet and base defense, playing an active role in the latter stage of the One Year War.

HG 1/144 HGUC MSN-02 Zeong
Bandai
$23.00The MSN-02 Zeong (ジオング Jiongu) is a prototype mobile suit appearing in the anime Mobile Suit Gundam. It was first piloted by the "Red Comet" Char Aznable. Developed by the Principality of Zeon at the A Baoa Qu space fortress during the One Year War, the Zeong was built exclusively for Newtype pilots. It initially had the model number "MS-16X" and was developed based on the data of multiple experimental units. The Zeong was also the first mobile suit to use the Psycommu system, which allowed a Newtype pilot to utilize its wire-guided remote-controlled forearms for all-range attack effectively. Each forearm was built with five mega particle cannons in its fingers. The Zeong also has three more mega particle cannons on its body, two in the waist and one in the head.The Zeong was expected to be around 35m tall when fully completed, making it much larger than most mobile suits of the time. Its large size was attributed to the difficulties in miniaturizing the Psycommu system. Though another account suggested that it was due to the need for larger generators to power its thirteen mega particle cannons. In the end, this mobile suit was only 80% complete when it was deployed, thus its lack of legs and exposed upper arms. Although the legs would aid in the AMBAC System, their omission did not hinder the Zeong from performing at 100% combat capacity, since two rocket thrusters were installed at where the legs were supposed to be.Although the Zeong was developed for Newtypes, it could also be operated by normal pilots. In this situation, the mobile suit would be controlled by a pilot in the torso cockpit and a gunner in the head cockpit. The two cockpits were connected by a traversal tube. In contrast, a single Newtype pilot could fully operate the Zeong from either one of the cockpits, though due to the mobile suit's prototype nature, its activation and initialization could only be done in the torso cockpit. In order to ensure the recovery of its data and pilot, especially if the pilot was a Newtype, the head also doubled as an escape pod and could detach from the main body when necessary.

HG 1/144 HGUC FA-78-3 Full Armor 7th Gundam
Bandai
$20.00The FA-78-3 Full Armor 7th Gundam is a mobile suit introduced in M-MSV. It was later redesigned and appears in the video game Mobile Suit Gundam: Battlefield Record U.C. 0081. The FA-78-3 Full Armor 7th Gundam is the additional armor-equipped version of the RX-78-7 7th Gundam. Unlike the previous FA-78-1 Full Armor Gundam, the Full Armor 7th Gundam is able to fight without any drop in performance. This is accomplished with the addition of built-in sub-generators and propellant tanks in the Full Armor components. The emphasis of the Full Armor components is offensive power rather than defensive power. In addition, the tail stabilizer on the rear waist, which is the mass center of the MS, act as an AMBAC device and dramatically improved the unit's acceleration capability.

HG 1/144 HGUC MSM-07E Z'Gok Experiment
Bandai
$15.00The MSM-07E Z'Gok-E (aka MSM-07E Z'Gok Experiment) is an experimental amphibious mobile suit introduced in the Mobile Suit Gundam 0080: War in the Pocket OVA . The Z'Gok E was an experimental improved version of the MSM-07 Z'Gok. Besides improved beam cannons in its arm, allowing for rapid-fire, the original Z'Gok's head-mounted missile launchers were also replaced with torpedo launchers for additional firepower when operating underwater. To allow for better cruising range underwater, the suit's main propulsion systems were relocated from the back to the legs to create a more streamlined body shape. Its limbs were also designed to be retractable for the same reason. The thrusters built into its back were meant for jumping and various ground based movements, and greatly boost the suit's mobility on land. The Z'Gok E used a standardized cockpit with the introduction of the United Maintenance Plan, and was powered by an improved generator which gave the suit ample performance.

HG 1/144 HGUC RGM-79GS GM Command Space Type
Bandai
$10.00The RGM-79GS GM Command Space Type is a mobile suit introduced in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the space use GM Command Space Type, and the ground use RGM-79G GM Command. Both suits were also used to collect data for the development of next-generation mass production models.Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command Space Type and GM Command. This difference in the backpack is the biggest characteristic that differentiates the two machines, and is related to the different gravitational environment that they operate in, 0G and 1G respectively. While the GM Command had downward-pointing thrusters concentrated on the bottom of the backpack, the GM Command Space Type's thrusters are spread around the backpack and faces various directions. The GM Command Space Type's thruster output is also boosted by 10%, has more apogee motors, as well as a greater propellant capacity for higher operating time.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize the mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

HG 1/144 HGUC RGM-79G GM Command
Bandai
$10.00The RGM-79G GM Command is a mobile suit that first appeared in the OVA Mobile Suit Gundam 0080: War in the Pocket. Following the success of the RGM-79D GM Cold Districts Type, a late production type GM deployed in the One Year War, development of new localized warfare machines using the suit as a basis started. The basic concept is to maintain the fundamental design of the GM Cold Districts Type while improving on its output and mobility. Demands of MS pilots who were unsatisfied with the original RGM-79 GM's performance were also taken into account, and with the upcoming counter offensive in space against the Principality of Zeon in mind, a decision was made to simultaneously developed a ground use unit and a space use unit. The end results were the ground use GM Command, and the space use RGM-79GS GM Command Space Type. Both suits were also used to collect data for the development of next generation mass production models.The GM Command is also called the "Colony Type" as it specialized in defending bases in space colonies and surrounding areas. For this reason, its output and weaponry were adjusted to reduce fatal damage to the colony's structure and walls. Specifications wise, the GM Command series is said to be a match for the Zeon's MS-14A Gelgoog, but as many of the machines were deployed to areas outside of the main battlefield that had low urgency, its functions were often suppressed and it could not display its full potential. To improve on the GM Cold Districts Type’s mobility, the GM Command series’ thrusters are distributed all over its body. Furthermore, the backpack, which contains the main propulsion system, was also boldly redesigned and optimized separately for the GM Command and GM Command Space Type. The placements of the thruster verniers on the GM Command's backpack are optimized based on simulations of operation within colonies, and they are pointed downwards for movements under gravity. Various sensors are also added to the backpack, replacing the normal GM's backpack beam saber rack.With the GM Command series use of a generator with higher output, intakes and ducts are also added to enhance cooling functions. This higher output generator is however a double-edged sword. Although it allows for full-scale operation of equipment like beam gun and beam rifle, such generators at that time could only be manufactured in zero gravity facilities, so mass production of the suit then at the Earth Federation Forces’ largest production facility at Jaburo was not possible. This had a negative impact on the suit's production number during the war.Due to the accumulation of manufacturing and designing knowledge, the GM Command series' maintainability and operability was greatly improved compared to the very first mass production models that had inconsistent standards. Unlike the normal GM, the GM Command series has additional sensors in the head such as environment monitoring sensors to thoroughly detect human presence/survivability, and this boosts the suit's anti-personnel and anti-material evasive capabilities. The GM Command series is also the first in the GM series to utilize mono-eye camera in the head to improve producibility. Communication capabilities are enhanced via the shoulder antenna, which also helps to prevent interferences or jamming caused by frequency bands used by civilians inside and outside of colonies. It was relatively easy to change the GM Command series' armor, backpack, and other parts; furthermore, its specifications can also be changed with little modification to the base structures. The suit served as the base for the RGM-79SP GM Sniper II.As the GM Command series was deployed as replenishment units during the war, only a small number were produced. Assignment of the machine to experienced MS pilots was prioritized, and as these pilots were often appointed as commanders of newly formed MS platoon, the GM Command series also gained a reputation as a 'Commander Use Unit' even though it was not specifically built for commanders. There were also cases where the suit was supplied on a platoon scale, leading to a considerable number of operational units in total.

HG 1/144 HGUC MS-09 Dom / MS-09R Rick Dom
Bandai
$22.00The MS-09 Dom (aka MS-09B Dom) is a mass-production ground combat mobile suit introduced in Mobile Suit Gundam. Its most well known pilots are the Black Tri-Stars. A heavy mobile suit developed by Zimmad, the MS-09 Dom was a ground combat machine equipped with hovercraft technology. It was fitted with thermonuclear jets and rockets under its feet, allowing it to quickly move across the ground, greatly improving its mobility compared to previous ground-use mobile suits. Thanks to sensors located in front of its feet, it was able to traverse uneven terrain. While in cruising mode, it could hover across the ground using only its thermonuclear jets. The Dom can hover at a maximum speed of 381 km/hr for up to 5 hours.Its primary thrusters adopted the Saturn Engine, a type of thermonuclear engine that used heavy elements such as zinc and lead as propellant, granting it higher thrust than thermonuclear engines that used lighter elements as propellant. The mobile suit's design was largely unchanged from the YMS-09 Prototype Dom aside from its appearance. It inherited the same cross-shaped monoeye rail from the MS-07C-5 Gouf Test Prototype, granting it an improved view of aerial targets. Lateral field of view was obtained by auxiliary sensors.For defense, the Dom was heavily protected, adopting a unique "skirt armor" design to protect weak points in the back, such as thrusters. Its cockpit hatch armor, which was its greatest weakness in the front, was also greatly enhanced. However, since the cockpit was entered directly from the front of the Dom, pilots in desert and wetland areas complained that the console panel would become dirty from entering and exiting. Meanwhile, the Dom's head was merged into its chest, a design intended to deflect and ricochet enemy projectiles, as well as lowering the possibility of being hit.The Dom's primary weapon, the 360mm Giant Bazooka, was developed in parallel with the mobile suit. It was capable of sinking a space cruiser with a single shot. It was also armed with a heat saber for close combat, as well as a scattering beam cannon in its chest, which was capable of blinding the enemy. It was said that the beam cannon was originally intended to be an energy port for beam weapons, but was repurposed after the development of beam weapons was delayed.

HG 1/144 HGGTO MS-06CK Zaku Half Cannon
Bandai
$23.00The MS-06CK Zaku Half Cannon is a mobile suit from Mobile Suit Discovery. When news reaches the Zeon's North California military base of a new Earth Federation Forces mobile suit, the development team begins a project to develop a prototype machine to counter the new MS . The MS-06CK Zaku Half Cannon is based on the MS-06 Zaku II and was designed to provide mid-range artillery support . The MS-06CK Zaku Half Cannon is the same MS as the MS-06C Zaku II with the addition of the MS-06K's backpack. The backpack can be equipped with a 180mm cannon or a large gatling gun.