Explore LAScaleModel's Latest Gundam Gunpla Models – New Arrivals Await!

Overview The Motor Nuclear MNP-XH08 Wei Yuan Shi - Imperial Guard Variant is a Steadfast Valor-grade model kit from the Legend of Star General series. This variant reconfigures the Wei Yuan platform with the equipment loadout and gold-and-white color scheme of the Tiandu Imperial Guard, adding a beast-face round shield, gold melon hammer, backpack banners, and redesigned armor panels to the base chassis. Motor Nuclear is a Chinese manufacturer known for original mecha designs that fuse ancient Chinese military aesthetics with sci-fi engineering, and the Wei Yuan line represents the entry-level tier within their Legend of Star General range. Key Features Alloy Inner Frame - Zinc alloy skeleton with 11 pre-assembled joint assemblies provides weight, stability, and the ability to hold dynamic poses under the full weapon loadout Imperial Guard Weapon Arsenal - Includes a Tiandu Army Standard Beast-Face Round Shield, Type Zero-Three Gold Melon Hammer, Tiandu Army Standard Long Sword, Type 33 Light Crossbow, and four Type 63 Horizontal Blade Prototype - Infantry Edge swords Pre-Painted Color Separation - 26 of 38 runners are pre-painted (193 painted parts), delivering the gold, white, and bronze Imperial Guard color scheme without painting Four Interchangeable Faceplates - Removable side head panels allow free swapping between four distinct face designs for display variety Modular Weapon Mounting System - Six documented mounting configurations including thigh-mounted weapon hardpoints, rear skirt armor weapon rails, backpack side connectors for horizontal blade holders or banners, and short/long shield arm connectors Display Stand Included - Dedicated base stand with support arm and nameplate sticker for finished display Builder Context This kit is suited for intermediate builders comfortable with multi-runner assembly and alloy inner frame integration. Construction is snap-fit with no cement required, and the pre-painted runners mean the kit looks display-ready without painting. The build complexity and part count (449 total parts across 38 runners) are comparable to a Bandai MG kit, with the added step of fitting armor over the pre-assembled alloy skeleton. Why Build This Kit The Motor Nuclear MNP-XH08 Wei Yuan Shi Imperial Guard Variant is the most display-oriented configuration in the Wei Yuan lineup, combining a striking gold-and-white pre-painted color scheme with a broad weapon arsenal that includes both melee and ranged options. The Tiandu Army Standard Beast-Face Round Shield is the visual centerpiece of this variant and is unique to the Imperial Guard configuration - no other Wei Yuan release includes it. At 19 cm to the head (21.5 cm with helmet tassel) and 358 grams fully equipped, the Imperial Guard has strong shelf presence for its price tier and noticeably more visual mass than Bandai HG or RG kits at similar price points. Builders already familiar with the Wei Yuan Trainee (MNP-XH06) or Sword Stance (MNP-XH07) will find the same chassis and build process here, with the differentiation coming entirely from the armor panels, color scheme, and equipment loadout. This kit shares the same weapon grip system as other Wei Yuan variants, so builders should note that the peg-and-socket hand connections work best when weapon weight is distributed across both hands and the display stand rather than relying on a single grip point. Box Contents Main body (38 runners, 449 total parts including 11 pre-assembled alloy inner frame components) Replacement hands (4 pairs) Backpack x1 Replacement backpack x1 Tiandu Army Standard Beast-Face Round Shield with handle x1 Type Zero-Three Gold Melon Hammer x1 Tiandu Army Standard Long Sword x1 Type 33 Light Crossbow x1 Type 63 Horizontal Blade Prototype - Infantry Edge x4 Horizontal blade mounting parts x1 pair Replacement faceplates x4 Replacement helmet crest x1 Replacement skirt armor x1 pair Shield arm connector (short) x1 Shield arm connector (long) x1 Rear skirt armor weapon connector x1 Backpack banners x2 Weapon connectors x3 Base stand with support arm x1 set Water slide decal sheet x1 Nameplate sticker sheet x1 Instruction manual Quality certificate After-sales service guide Brand Motor Nuclear Series Legend of Star General Grade Steadfast Valor (忠勇级) Model Number MNP-XH08 Height Approx. 19 cm (21.5 cm with helmet tassel) Width Approx. 10 cm Weight Approx. 358.4 g (body + all accessories), 181.6 g (body only) Materials ABS, POM, PVC, Zinc Alloy Total Parts 449 Runners 38 (26 pre-painted) Pre-Painted Parts 193 Pre-Assembled Components 11 alloy inner frame assemblies Decals Water slide decal sheet (military rank), nameplate sticker Display Stand Included Age Recommendation 16+ Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

The Bandai 1/144 RX-78F00/E Gundam (EX-001 G.L.R.S.S. Feather Unit) is a snap-fit plastic model kit based on the mobile suit featured in Gundam: Next Universal Century, the original animation shown at the Gundam Next Future Pavilion during the Osaka-Kansai Expo. The kit stands approximately 125mm tall and reproduces the RX-78F00/E's distinctive G.L.R.S.S. (Gundam Leaping Recursive Spangle Swarm) Feather equipment using clear solar panel parts and articulated backpack arms. This is a beginner-friendly build with IROPLA multi-color molding for a paint-free finish and snap-fit construction requiring no glue. The RX-78F00/E is a renewable energy demonstration test machine distinguished from the original RX-78F00 by the omission of the rear head fin and shoulder sensor, and the use of single-piece thrusters. Key Features IROPLA Multi-Color Molding: Vibrant color separation achieved through Bandai's multi-color molding technology, requiring no painting for a finished appearance Clear Solar Panel Parts: The G.L.R.S.S. Feather Unit solar panels are molded in translucent plastic and can be displayed in open or folded configurations Dual Backpack Options: Includes parts to build both the standing statue version and the standard version of the backpack Beam Welding Gun: Newly designed weapon can be reconfigured between deployed and stored states, and mounts on the left forearm when stored Swappable Armor Parts: Removable and interchangeable armor sections allow switching between RX-78F00 and RX-78F00/E configurations Articulated Backpack Arms: Multi-jointed support arms for the Feather Unit allow flexible posing of the solar panel equipment Snap-Fit Assembly: No glue required for construction, with marking seals included for detail application Included Equipment and Accessories G.L.R.S.S. Feather Unit equipment (1 set) Armor parts (1 set) Shoulder replacement parts for standing statue reproduction (1 set) Beam Welding Gun (1 set) Beam Rifle (1) Shield (1) Beam Saber grip (2) Hand parts (1 set) Marking seal (1 sheet) Specifications Brand Bandai Spirits Series Gundam: Next Universal Century Line 1/144 Scale (Ungraded) Scale 1/144 Model Number RX-78F00/E Mobile Suit Name Gundam (EX-001 G.L.R.S.S. Feather Unit) Bandai SKU BAS2856816 UPC / JAN 4573102735836 Product Type Snap-fit Plastic Model Kit Material PS, PE Country of Origin Japan Release Date April 2025 (original); June 2026 (Next Universal Century reissue)

The Bandai HGUC #267 1/144 Me02R-M01 Messer Type-M01 (Gawman Use) is a snap-fit plastic model kit from Mobile Suit Gundam: Hathaway's Flash - The Sorcery of Nymph Circe. This kit recreates Gawman Nobile's personal Messer unit with entirely new exterior molding that distinguishes it from the standard Messer Type-F, including a distinctive unpainted left shoulder that reflects the urgency of its battlefield deployment. Suitable for beginner to intermediate builders, this HG kit features snap-fit construction and color-separated parts for an accurate finish without painting. The Messer Type-M01 was manufactured on a separate production line from the standard F-type and assigned to Gawman as a replacement after his original unit was lost during operations. Key Features All-New Sculpting: Entirely new exterior parts distinguish Gawman's M01 unit from the standard Messer Type-F, capturing the heavier armor profile and rugged silhouette Exclusive Left Shoulder Part: Includes a unique left shoulder component to accurately recreate Gawman's personal machine with its signature unpainted armor detail Stress-Free Skirt Armor: Front and rear skirt armor uses a stress-free structure that maintains a wide range of articulation without parts detaching during posing Smooth Joint Engineering: Elbow and knee joints are double-jointed for fluid articulation and dynamic combat posing Poseable Mono-Eye: The mono-eye sensor can be repositioned by removing the upper head piece Color-Separated Parts: Molded in accurate colors for a faithful appearance straight out of the box with minimal sticker application Included Equipment and Accessories Messer Type-M01 (Gawman Use) mobile suit Long Beam Rifle x1 Beam Sabers x2 Spike Shoulder Armor x1 Small Shield x1 Multipurpose weapon-holding hands (1 pair) Trigger finger right hand x1 Sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Mobile Suit Gundam: Hathaway's Flash - The Sorcery of Nymph Circe Line High Grade Universal Century (HGUC) Kit Number 267 Scale 1/144 Model Number Me02R-M01 Mobile Suit Name Messer Type-M01 Pilot Gawman Nobile Bandai SKU BAS2815163 UPC / JAN 4573102725370 Product Type Snap-fit plastic model kit Material PS (Polystyrene) Country of Origin Japan Release Date May 2026

The Bandai MG 1/35 AV-98 Ingram 1 is a Master Grade model kit of the iconic police labor from the Mobile Police Patlabor anime series. Manufactured by Shinohara Heavy Industries in-universe and piloted by Noa Izumi of Special Vehicles Section 2, the Ingram is one of the most recognizable mecha designs outside the Gundam franchise. This MG kit delivers the detailed engineering and inner-frame construction expected from the Master Grade line, making it suitable for intermediate to advanced builders. Originally released in 2001 and reissued by Bandai Spirits in 2021 with updated packaging, this kit remains a standout for Patlabor fans and mecha modelers alike. Key Features 1/35 Military Scale: Built in standard military model scale, making it ideal for dioramas and compatible with 1/35 military vehicle and figure kits Detailed Cockpit: Fully reproduced cockpit interior visible by lifting the opening chest armor Revolver Storage Gimmick: The hand revolver can be stored inside the right leg compartment, replicating the mechanism from the anime Pilot Figures Included: Both standing and seated pilot figures are provided for display versatility Full Articulation: Fully articulated once assembled with three sets of interchangeable hands for multiple weapon and posing options Snap-Fit Assembly: Pre-colored injection plastic parts snap together without glue, with a full painting guide included in the instruction manual Included Equipment and Accessories Plastic runner parts to build AV-98 Ingram 1 Standing pilot figure Seated pilot figure Revolver (storable in right leg compartment) Baton Long baton Three sets of interchangeable hands Instruction manual with painting guide Specifications Brand Bandai Spirits Series Mobile Police Patlabor Line Master Grade (MG) Scale 1/35 Model Number AV-98 Mobile Suit Name Ingram 1 Pilot Noa Izumi Bandai SKU 2057588 UPC / JAN 4573102619679 Product Type Model Kit Material PS (Polystyrene), PVC Country of Origin Japan Release Date 2021 (Reissue)

The Bandai HGBF #013 1/144 PPGN-001 Gundam Exia Dark Matter is a High Grade Build Fighters kit based on the antagonist mobile suit from the Gundam Build Fighters anime series. Piloted by Meijin Kawaguchi during the final round of the 7th World Tournament, the Exia Dark Matter is a heavily modified version of the Gundam Amazing Exia, rebuilt for overwhelming close-range combat. This snap-fit kit is suitable for beginner to intermediate builders, requiring no glue or painting to complete. The kit features multi-color molded parts that faithfully reproduce the dark color scheme seen in the anime. Key Features Dark Matter Booster: Back-mounted support unit equipped with two detachable Dark Matter Blades, capable of independent operation Close-Combat Weapons: Includes the Brinicle Blade and Prominence Blade for dynamic melee posing Multi-Color Molding: Pre-colored plastic runners reproduce the dark-toned color scheme straight out of the box Translucent Effect Parts: Clear parts included for blade and weapon detailing Full Articulation: Ball-joint neck, swinging shoulder joints, 90-degree elbow bend, 360-degree waist rotation, and multi-axis hip joints Snap-Fit Assembly: No glue required - parts connect via pegs and sockets for straightforward construction Included Equipment and Accessories Gundam Exia Dark Matter mobile suit Brinicle Blade Prominence Blade Dark Matter Booster with 2 Dark Matter Blades Weapon-holding manipulators (1 pair) Foil sticker sheet Assembly instruction manual Specifications Brand Bandai Series Gundam Build Fighters Line HGBF (High Grade Build Fighters) Kit Number #013 Scale 1/144 Model Number PPGN-001 Mobile Suit Name Gundam Exia Dark Matter Pilot Meijin Kawaguchi Bandai SKU 5058791 UPC / JAN 4573102587916 Product Type Model Kit Material ABS, PE, PS Country of Origin Japan Release Date March 2014

The Bandai HGBF #12 1/144 AC-01 Miss Sazabi is a High Grade Build Fighters kit based on Aila Jyrkiäinen's custom mobile suit from Gundam Build Fighters. Modified from the iconic MSN-04 Sazabi, the Miss Sazabi features a feminine redesign with new coloring, reshaped thrusters, and a sleek silhouette that stands out among HG kits. Despite being 1/144 scale, this kit towers over most HG models and approaches the size of smaller 1/100 scale kits, making it an impressive display piece. Suitable for beginner to intermediate builders, this snap-fit kit requires no glue or paint for a complete build. Key Features Oversized 1/144 Scale: Significantly larger than standard HG kits, rivaling smaller 1/100 scale models in overall size Feminine Sazabi Redesign: Custom design by Aila Jyrkiäinen with reshaped armor, new leg-mounted thrusters, and back-mounted thrusters derived from the original Sazabi's shoulders Multiple Beam Weapons: Includes Sweet Sword (beam tomahawk), beam rifle, and beam bazooka for varied combat display options Sweet Shield: Left arm-mounted shield modified from the original Sazabi's front skirt armor with a unique custom pattern Display Stand Included: Dedicated display base for stable, dynamic aerial posing right out of the box Snap-Fit Assembly: Molded in multiple colors with foil stickers for decoration - no glue or paint required Included Equipment and Accessories 8 plastic runners Sweet Sword (beam tomahawk) Beam rifle Beam bazooka Sweet Shield Set of interchangeable hands Display stand Foil sticker sheet Instruction manual Specifications Brand Bandai Spirits Series Gundam Build Fighters Line HGBF (High Grade Build Fighters) Kit Number #12 Scale 1/144 Model Number AC-01 Mobile Suit Name Miss Sazabi Pilot Aila Jyrkiäinen Bandai SKU 2221163 UPC 4573102737014 Product Type Model Kit Material ABS, PE, PS Country of Origin Japan Release Date March 2014 (Bandai Spirits reissue)

The Bandai HGAW #118 1/144 GX-9900-DV Gundam X Divider is a High Grade After War kit based on the rebuilt Gundam X from the anime series After War Gundam X. After the original GX-9900 Gundam X sustained heavy damage, it was reconstructed aboard the Freeden and equipped with the Divider system in place of the Satellite Cannon, giving pilot Garrod Ran a versatile mobile suit with enhanced defensive and offensive capabilities. This is a beginner-to-intermediate level snap-fit kit that does not require glue or painting, though painting is recommended for full color accuracy on the Divider. Key Features Transformable Divider: The Divider shield opens and closes to replicate the Harmonica Cannon firing mode, and can be mounted on the backpack or held as a handheld shield Articulated Backpack: Energy tanks and thrusters on the backpack are fully movable for dynamic posing Full Weapon Loadout: Includes Beam Machine Gun, Hyper Bazooka, and two Large Beam Swords with dedicated beam effect parts Multiple Hand Options: Comes with a pair of general weapon-holding hands, a right trigger-finger hand, and a left open-palm hand Snap-Fit Assembly: Molded in PS and PE plastics with snap-fit construction requiring no glue Foil Stickers Included: Foil sticker sheet provided for color accents and sensor details Included Equipment and Accessories Divider (transformable shield/Harmonica Cannon) Beam Machine Gun Hyper Bazooka Large Beam Sword x2 Beam effect parts x2 Weapon-holding hands (1 pair) Right trigger-finger hand Left open-palm hand Foil sticker sheet Specifications Brand Bandai Spirits Series After War Gundam X Line HGAW (High Grade After War) Kit Number 118 Scale 1/144 Model Number GX-9900-DV Mobile Suit Name Gundam X Divider Pilot Garrod Ran Mechanical Designer Kunio Okawara Bandai SKU BAS2117229 UPC / JAN 4573102641168 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date December 2010

Overview These alligator clip sticks are bamboo-dowel painting clips designed for holding individual model kit parts during airbrushing, spray priming, and hand painting. Each stick measures 225 mm in total length with a 3 mm bamboo dowel and a 35 mm spring-loaded alligator clip, providing a longer reach and more comfortable grip than most comparable clips on the market. The pointed bamboo ends insert directly into styrofoam blocks, corrugated cardboard paint stations, or any soft-material base for hands-free drying. Key Features 225 mm total length - longer than Mr. Hobby GT90 clips (170 mm) and most Amazon alternatives (150 mm), giving more clearance between your hand and wet paint 3 mm bamboo dowel - lightweight, rigid, and easy to trim to a custom length with side cutters or a hobby knife 35 mm spring-loaded alligator clip - toothed jaws grip runner gates, peg holes, and part edges securely without slipping during spraying Pointed end - inserts directly into styrofoam, floral foam, corrugated paint stations, or any soft base material for hands-free part drying Compatible with standard clip bases - works with Mr. Hobby Almighty Clip Base (GT89), third-party honeycomb bases, and DIY foam setups Consumable and replaceable - clips wear out over time from paint buildup and spring fatigue, so these are sold in bulk packs for easy restocking Builder Context Alligator clip sticks are an essential tool for any builder who paints, whether by airbrush, rattle can, or hand brush. No special skills are required - clip the part, paint it, and stick the dowel into a base to dry. Beginners setting up their first paint station and experienced builders burning through clips on large third-party kit builds will both get use out of these. Why These Clips These 225 mm alligator clip sticks are a direct, lower-cost alternative to the Mr. Hobby GT90 Almighty Clip Stick, which retails for $11.99-$12.00 per 36-pack at US hobby retailers and is frequently out of stock. At $5.99 for a 20-pack or $9.99 for a 40-pack, these provide comparable grip and build quality at roughly half the per-clip cost. The 225 mm length is 55 mm longer than the GT90, which gives noticeably more clearance when spraying primer or clear coats on larger parts from 1/100 and 1/60 scale kits. Painting clips are a consumable supply - paint buildup, bent teeth, and weakened springs mean regular replacement is normal, making per-unit cost the most important factor for builders who paint frequently. These ship from a US-based hobby retailer, so there is no import wait or minimum order compared to sourcing directly from overseas suppliers. Package Contents Alligator clip sticks (20 or 40 pieces depending on variant selected) Specifications Total Length 225 mm Dowel Diameter 3 mm Clip Length 35 mm Dowel Material Bamboo Clip Material Metal (spring-loaded) Pack Sizes 20-pack / 40-pack Base Included No (compatible with standard clip bases and foam)

Overview The Cangdao CD-AS-02EX Tiger Hunter is a 1/100 scale model kit from the Guardian-Sentinels of White Tiger series, designated as a Stardust Class entry. The Tiger Hunter is the dedicated support mecha of the Sacred Beast White Tiger, designed as a stealth ambush unit specializing in long-range interference and rapid strikes from concealment. Its design draws from traditional Chinese warrior aesthetics with a distinctive conical hat head silhouette, dark navy and white armor panels accented in gold, and translucent blue effect parts representing energy discharge. Cangdao (also known as Zen Of Collectible / 藏道模型) is a Chinese mecha brand known primarily for its premium 1/72 diecast action figures in the Four Sacred Beasts universe. The Stardust Class line represents Cangdao's expansion into the assembly model kit format, building plastic armor panels over a pre-assembled alloy inner frame. The CD-AS-02EX is the second Stardust Class release following the CD-AS-01 Long Ji (Azure Dragon). Key Features Pre-Assembled Alloy Inner Frame - The alloy inner frame arrives pre-built, providing structural rigidity and stable joint tension beneath the plastic armor panels. This keeps the finished model poseable under the weight of armor and weapons without the looseness common in all-plastic builds. 1/100 Scale, MG-Grade Complexity - Standing approximately 21 cm tall with 20 body runner plates, the Tiger Hunter delivers a build experience comparable in scale and part count to a Bandai Master Grade kit. Extensive Weapon and Accessory Set - The kit includes a long ornate polearm, a chain weapon, a crossbow, a large shuriken, arrow projectiles, and multiple interchangeable hand parts, giving the Tiger Hunter a wide range of display and posing options. Translucent Blue Effect Parts - Clear parts represent the Tiger Hunter's energy discharge effects, including flowing energy cloaks and a translucent conical hat piece, adding visual impact to the finished display without painting. Display Base with Docking Station - A dedicated display base with an integrated equipment rack and docking structure is included, built from four runner plates. Water-Slide Decals - Two sheets of water-slide decals are included for additional markings and detail work. Builder Context The Cangdao Stardust Class kits are suited for intermediate builders comfortable with standard snap-fit model kit assembly. The pre-assembled alloy inner frame simplifies the structural build, but fitting plastic armor panels over a metal skeleton requires more care with tolerances than an all-plastic kit. The 20-runner part count and 1/100 scale put this in MG-grade territory in terms of build time and complexity. No cement is required, but panel lining and waterslide decal application are recommended to get the most out of the color separation and surface detail. Why Build This Kit The Cangdao CD-AS-02EX Tiger Hunter is one of the most affordable alloy-frame model kits currently available at 1/100 scale, offering a metal inner frame, a full weapon loadout, and a dedicated display base at a price point where most competitors provide all-plastic construction with minimal accessories. The accessory density is unusually high for this price range - a polearm, crossbow, chain weapon, shuriken, arrow projectiles, translucent energy effects, and multiple hand options give it more display versatility than many kits costing twice as much. At 21 cm, the Tiger Hunter stands at standard MG height and displays well alongside Bandai 1/100 kits, but the alloy frame gives it noticeably more weight and joint stability than a typical MG. The dark navy and gold color scheme differentiates it sharply from the CD-AS-01 Long Ji's dragon-themed aesthetic, making it a strong companion piece for builders collecting the Guardian-Sentinels series. For builders interested in Chinese-mythology mecha outside the Gundam universe, the Tiger Hunter is a lower-cost entry point into Cangdao's Four Sacred Beasts universe than the brand's premium 1/72 diecast figures, which typically retail above $100. Box Contents Body runner plates x20 Display base runner plates x4 Pre-assembled alloy inner frame x1 Water-slide decal sheets x2 Translucent blue effect parts (energy cloak, conical hat piece) Long ornate polearm Crossbow Chain weapon Large shuriken Arrow/dart projectiles Backpack/equipment modules Multiple interchangeable hand parts Assembly instructions Specifications Brand Cangdao (Zen Of Collectible / 藏道模型) Series Guardian-Sentinels of White Tiger (巡界使) Product Name Tiger Hunter (虎狩) Class Stardust Class (星塵級) Product Number CD-AS-02EX Scale 1/100 Height Approximately 21 cm Materials ABS, POM, Alloy (inner frame) Runner Count 20 body + 4 display base Assembly Required (snap-fit over pre-assembled alloy inner frame) Decals Water-slide x2 sheets EAN 6974422351979 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Yu Yi Tang EMP-02 Haoling Baidi is a mecha model kit set from the Xuanji Zhuxinglu (玄机铸型录) Five Directions, Five Emperors series. Inspired by the White Emperor (Baidi) of Chinese cosmology, the kit includes the main humanoid mecha with a pre-assembled alloy inner frame and a pair of phoenixes - one male (Feng) and one female (Huang) - that combine with the mecha to form the Phoenix Divine Armor (凤凰神装). Yu Yi Tang (驭意堂) is a Chinese mecha brand under Gaosheng Culture that launched in 2024 with the Five Emperors series, gaining attention for combining mythology-themed original mecha design with alloy inner frame construction and multi-layer armor systems at aggressive price points. Key Features Pre-Assembled Alloy Inner Frame: A complete alloy skeleton (~300 g) comes fully assembled out of the box, paired with POM joint components for articulation. No frame assembly required - armor layers build directly onto the alloy core. Dual Phoenix Companion Mechas: Includes both a male Feng and female Huang phoenix, each with approximately 52 cm wingspan and 42 cm body length. The two are distinguished by subtle design differences - the Feng carries blue gemstone accents on the head and tail, while the Huang features gold crest plating and an openwork tail structure. Phoenix Divine Armor Combination: Both phoenixes mount onto a dedicated backpack via metal mechanical arms, forming the combined Haoling Baidi Phoenix Divine Armor configuration. Three display modes are available: Nirvana (wings fully spread), Linkage (wings deployed for balanced positioning), and Defense (wings wrapped protectively around the mecha body). 10 Pre-Painted Gold Runner Plates: Ten runners arrive factory-painted in two distinct gold tones - gilded gold (鎏金) and bright gold (耀金) - with improved paint coverage and no visible plastic marks under the finish, an upgrade over the first-release Yuanling Huangdi. Multi-Weapon Loadout with Combination Forms: Includes the Guanri long sword, Lingxiao short blade, and a grip structure that converts the side skirt wing armor into the Changgeng divine bow. The long sword and short blade connect end-to-end to form the Guanri Lingxiao spear (~38 cm). Phoenix tail feathers detach and mount onto included grip handles to create Jinxing whip blades. Linked Armor Mechanics: Shoulder armor, rear skirt, and knee sections feature built-in linkage mechanisms that deploy automatically during articulation, revealing internal frame detail and expanding the silhouette. Matte Surface Finish: All non-painted runners feature a factory matte texture, giving the assembled kit a built-in flat coat appearance without requiring a separate top coat application. Builder Context This is an intermediate-to-advanced build. The alloy inner frame eliminates skeleton assembly, but the 63 runners and multi-layer construction (alloy frame, inner structure, outer armor) produce a build time of approximately 7 hours. Assembly is snap-fit with no cement required. The instruction manual provides linear step-by-step guidance rather than stage-by-stage breakdown, and includes hidden gate mark placement on most visible surfaces. Builders familiar with MG-grade Bandai kits or other alloy-frame third-party kits like Motor Nuclear or Ming Jiang Legend will find the layered construction approach familiar, though the phoenix sub-assemblies add repetitive steps since both birds share nearly identical structures. Why Build This Kit The Yu Yi Tang EMP-02 Haoling Baidi is the second release in the Five Emperors series and represents measurable improvements over the first-release Yuanling Huangdi in paint quality, alloy frame refinement, and combined-form integration. The dual-phoenix configuration gives the completed display a wingspan exceeding 50 cm on each side, making the Phoenix Divine Armor form one of the largest shelf-presence kits available in this price range from any third-party manufacturer. For builders who want an alloy inner frame experience comparable to Motor Nuclear's MNP series or Ming Jiang Legend's Ying Zheng but with a mythology-themed aesthetic focused on Chinese cosmology rather than martial heroes, the Five Emperors line is the primary alternative. The matte surface finish, hidden gate marks, and pre-painted gold runners mean the kit presents well as a straight build without painting, though the predominantly white armor benefits noticeably from the included gold filigree waterslide decals. Builders should note that the combined Phoenix Divine Armor form weighs approximately 900 g and pushes the alloy frame joints to their support limits - the included display stand with dual snake-bone support arms is effectively required for long-term combined-form display rather than optional. Box Contents Haoling Baidi main mecha body (63 runners including 10 pre-painted gold plates) Pre-assembled alloy inner frame x1 Feng (male phoenix) body x1 Huang (female phoenix) body x1 Interchangeable hands x5 pairs (fists, open hands, three grip types) Guanri long sword x1 Lingxiao short blade x1 Changgeng divine bow grip assembly x1 Jinxing whip blade grip handles x2 Phoenix tail feather segments x4 Backpack with metal mechanical arm connectors x1 Display base with storage compartment x1 Snake-bone flexible support arms x2 Metallic gold waterslide decal sheet x1 Parts checklist x1 Assembly manual x1 Background display panel x1 Folding cardboard runner racks x2 Specifications Brand Yu Yi Tang (驭意堂) Series Xuanji Zhuxinglu - Five Directions, Five Emperors Mecha Designation EMP-02 Haoling Baidi Beast Designation MC-02F Feng / MC-02H Huang Height (Mecha) Approx. 25 cm Phoenix Wingspan Approx. 52 cm Phoenix Body Length Approx. 42 cm Combined Spear Length Approx. 38 cm Weight (Mecha Only) Approx. 529 g Weight (Phoenix Divine Armor) Approx. 900 g Box Weight Approx. 3.7 kg Runner Count 63 Pre-Painted Runners 10 (gold, two tones) Material ABS, POM, alloy (die-cast) Inner Frame Pre-assembled alloy Assembly Type Snap-fit plastic model kit Decals Metallic gold waterslide decals Age Recommendation 15+ EAN 6978065720017 Package Dimensions 53 x 23 x 40 cm Country of Origin China Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The EDDAS 1/100 NGMPM01 Nomes Commander Type is a general-purpose mass production mecha from EDDAS Technology's original mecha universe. Designed as a squad-buildable grunt unit rather than a hero machine, Nomes features a military-realistic aesthetic with angular, blocky armor plating, a subdued blue-gray color scheme, and two interchangeable head options - a visor-type for standard units and a dual-eye type for commander configuration. EDDAS Technology (formerly Starfield Toys) has built a reputation for alloy-frame original mecha kits with extensive accessory loadouts, and Nomes is the fourth release in the line following Asgard, Salamander, and Valkyrie. Key Features Alloy inner frame - Zinc alloy skeleton with surface detailing provides structural rigidity, tight joints, and a hefty 220g finished weight Squad-building design - Two swappable head units (commander dual-eye and standard visor) let builders configure leader or rank-and-file units from the same kit Full weapon storage on body - Every included weapon can be mounted on the mecha simultaneously using back-mounted weapon racks, leg holsters, and rear waist attachment points Hangar-style display base - Upgraded ground base includes weapon rack pylons, mechanical arms, an elevator platform with three height settings, a ring-shaped maintenance gantry, and miniature crew figures Extensive weapon loadout - Includes beam sabers, machine cannons on articulated mechanical arms, folding knives stored in knee armor, pistol, large blade, semi-automatic rifle, submachine gun, and shield Linked armor movement - Knee bending triggers sequential armor panel shifts on the thigh and lower leg, revealing internal mechanical detail Four pairs of interchangeable hands - Fist, relaxed, open palm, and weapon grip types, all with independently articulated thumbs Builder Context Nomes is a snap-fit kit aimed at intermediate builders comfortable with alloy-frame assembly. The build experience is comparable to MG-grade Bandai kits in terms of part count and complexity, with 37 runners plus alloy frame components. Joint tightness is reported as firm across the alloy skeleton, and no cement or painting is required for a complete build, though the subdued color scheme benefits from panel lining and decal application. Why Build This Kit The EDDAS Nomes Commander Type is the only kit in the EDDAS lineup specifically designed for squad display - builders who want to recreate military formation scenes can purchase multiple units and differentiate them using the commander and standard head options. At approximately 19 cm, the finished build is sized consistently with standard 1/100 Bandai MG kits, but the 220g weight from the alloy inner frame gives it noticeably more heft and posing stability than a typical MG. The hangar-style display base with mechanical arms, elevator, crew figures, and weapon storage pylons is a standout accessory that reviewers have highlighted as a significant value-add, and it is compatible with other EDDAS kits in the line. For builders interested in real-type military mecha aesthetics outside of the Gundam universe, Nomes offers a weapon-dense, alloy-frame kit at a price point well below most competing 1/100 alloy-frame kits from brands like Motor Nuclear or Infinite Dimension. Box Contents 37 plastic runners (ABS/PS/POM) Zinc alloy inner frame components Commander head unit (dual-eye type) Standard head unit (visor type) 4 pairs of interchangeable hands (fist, relaxed, open palm, weapon grip) 2 beam sabers with blue effect parts 2 machine cannons with articulated mechanical arms 2 folding knives Pistol with barrel attachment Large blade Semi-automatic rifle Submachine gun with movable magazine Shield Back-mounted weapon rack assembly Leg-mounted weapon holster brackets (left and right) Hangar-style display base with weapon pylons, mechanical arms, elevator, ring gantry, and crew figures Standard display stand arm (alternative to hangar base) Water slide decal sheet 3D sticker sheet (gun muzzle and scope accents) Assembly instructions Specifications Manufacturer EDDAS Technology Product Name Nomes Commander Type Model Number NGMPM01 Scale 1/100 Height Approx. 19 cm (7.48 in) to head Weight Approx. 220g (assembled, without weapons) Materials POM, ABS, PS, Zinc Alloy Runner Count 37 runners + alloy frame parts Assembly Snap-fit, no cement required Decals Water slide decals + 3D stickers Release Date July 2026 Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The KOSMOS PGU RX-93 Nu Gundam LED Set (Full Version) is a third-party RGB lighting upgrade designed specifically for the Bandai PG Unleashed 1/60 RX-93 Nu Gundam. This Full Version includes complete LED coverage for the main body and all six fin funnels, making it the most extensive lighting configuration KOSMOS offers for this kit. The system uses flexible printed circuit boards (FPC) to illuminate the head, cockpit, chest vents, backpack thrusters, and all six fin funnels without restricting the model's articulation. KOSMOS is a Chinese aftermarket brand specializing in LED systems for Gunpla, known for app-controlled RGB lighting and model-specific circuit board routing that avoids joint interference. Key Features Full 6-Funnel Coverage: All six fin funnels receive individual dual-zone LED sets, lighting the complete funnel array for full deployment display 4-Channel Lighting Architecture: Three independent RGB channels plus one monochrome channel control head, cockpit, chest heat sink, body nozzles, and fin funnels separately Dual-Zone Fin Funnel Illumination: Each of the six fin funnels contains two independently controlled lighting zones - central frame and edge frame - allowing simultaneous multi-color display within a single funnel Double-Sided Silk-Screened Acrylic Panels: Custom acrylic light guide panels in each fin funnel create a layered, three-dimensional glow effect that recreates the psycho-frame energy field FPC Flexible Circuit Design: All circuit boards are routed to avoid joint areas, preserving the PG Unleashed Nu Gundam's full range of articulation after installation KOSMOS UNIVERSE App + Remote Control: Proprietary smartphone app with wireless remote provides four preset lighting modes, four custom user profiles, and a customizable power-on animation sequence No Modification Required: Plug-and-play installation with no cutting, trimming, or permanent changes to the model Builder Context This LED set is suited for intermediate to advanced builders who are comfortable working with small electronic components and routing wiring through a completed model. Installation does not require soldering, but careful handling of the FPC boards is important - bending beyond the natural flex range can damage circuits. All LED components should be tested before installation, as replacements cannot be offered after the wiring is routed into the kit. Builders familiar with Bandai's official PG Unleashed LED Unit will find the KOSMOS system significantly more capable, with RGB color control, app connectivity, and complete fin funnel coverage that the official unit does not offer. Why Build This Kit The KOSMOS PGU RX-93 Nu Gundam LED Set (Full Version) is the most comprehensive aftermarket lighting option currently available for the PG Unleashed Nu Gundam, covering areas the official Bandai LED Unit does not reach - particularly all six fin funnels and the backpack thrusters. Bandai's official LED Unit illuminates the head, chest, and cockpit in fixed green, requires four AA batteries, and does not support any color customization. The KOSMOS system replaces that limitation with full RGB control across four independent channels, app-based color programming, and dual-zone illumination across all six funnels that no other aftermarket LED set for this kit currently matches. The deployed fin funnel array is the defining visual feature of the PGU Nu Gundam, and the Full Version ensures all six funnels are lit rather than just two. Builders who already own the PG Unleashed Nu Gundam and want to elevate it from a display model to an illuminated centerpiece will find this a meaningful upgrade over the official Bandai option at a comparable price point. Box Contents Main body LED light kit (head, cockpit, chest heat sink, indicators) 6 fin funnel LED light sets with double-sided silk-screened acrylic panels Bonus nozzle light set (backpack thruster illumination) KOSMOS UNIVERSE Bluetooth controller Wireless remote control Exclusive brushed stainless steel metal nameplate Installation manual Specifications Brand KOSMOS Product PGU RX-93 Nu Gundam RGB LED Set (Full Version - 6 Fin Funnels) Compatibility Bandai PG Unleashed 1/60 RX-93 Nu Gundam only Lighting Channels 4 (3 RGB + 1 Monochrome) Circuit Type FPC Flexible Printed Circuit Board Funnel Panels Double-sided silk-screened acrylic Funnel Coverage All 6 fin funnels Control Method KOSMOS UNIVERSE App + Wireless Remote Material PVC, ABS, FPC Estimated Release Late September 2026 Backorder Notice:This item is currently on backorder and will be shipped once available. Please be aware that cancelling a backorder will incur a 25% restocking fee. For detailed information on our backorder and cancellation policies, please visit our FAQs page.

Official SNAA RetailerLA Scale Model is an authorized retailer of SNAA. All SNAA model kits are 100% genuine and sourced directly from the manufacturer. SNAA 1/100 YR-05 Nether Emperor F.A Type (Feathered Eagle Equipment) The SNAA 1/100 YR-05 Nether Emperor F.A Type is the full armament upgrade of the Nether Emperor A.P Type, adding the Feathered Eagle wing and weapon system to the Emperor Series' most mobile frame. Where the A.P Type prioritized a clean, stripped-back silhouette, the F.A Type loads the same articulated skeleton with a complete flight-capable equipment set - front shield wings, rear vector thrust wings, and armed storage side wings - transforming the Nether Emperor from a ground-focused mobility unit into a multi-range combat platform. SNAA is a Chinese manufacturer known for original mecha designs across their Emperor Series (1/100) and Round Table Knights (1/144) lines. Key Features Feathered Eagle Wing System - Three-piece PF-series wing equipment consisting of a Front Anti-Beam Guard Wing (PF-01), Rear Vector Thrust Wing (PF-02), and two Armed Storage Side Wings (PF-03) that dramatically expand the kit's silhouette and display presence Full A.P Type Weapon Set Retained - Includes the Thunder Pulse ranged weapon, Instant Flash Broken Blade with extendable tip, and Armor-Piercing Thrust retractable bayonet carried over from the base configuration Full Inner Frame - Complete articulated skeleton shared with the A.P Type, featuring cockpit hatch, waist rotation, and hip joints with pull-down extension for expanded leg range of motion Multi-Range Combat Configuration - F.A Type adds long-range firepower and defensive wing equipment to the A.P Type's existing mid-range and close-quarters weapon set 1/100 Scale Snap-Fit Assembly - Pre-colored runners with ABS, POM, and PVC construction, no cement required SNAA x Starry Craftsman Co-Production - Joint development between SNAA and Starry Craftsman, the same partnership behind the Round Table Knights BE line Builder Context The Nether Emperor F.A Type is suited for intermediate to advanced builders. The base inner frame is shared with the A.P Type, which means tight joint assembly during the skeleton build - firm pressure is needed to seat frame parts, though outer armor goes on more smoothly. The added wing equipment increases the total build time and complexity beyond the A.P Type, and the finished kit will require careful balance when posing due to the rear-heavy wing system. Comparable in build involvement to a Bandai Master Grade kit with a large backpack or flight unit. Why Build This Kit The SNAA 1/100 YR-05 Nether Emperor F.A Type fills a specific gap in the Emperor Series lineup - it is the full armament configuration of the series' most posable frame, combining the A.P Type's mobility-first design with a dramatic wing system that no other Emperor kit offers. Where the Fire Lord F.P.A.A. delivers maximum visual impact through flame-effect parts and heavy armor, the Nether Emperor F.A Type achieves a different kind of shelf presence through its Feathered Eagle wingspan while retaining the flexible posing that made the A.P Type the recommended Emperor Series entry point. At its 168 RMB MSRP, the F.A Type sits at the same price tier as the Blade King (YR-02), making it a mid-range Emperor Series purchase rather than a premium commitment like the Fire Lord variants. Builders who already own the A.P Type should note that this is a standalone kit, not an add-on pack - the full mech plus all equipment is included. For builders new to SNAA's 1/100 line, the A.P Type remains the simpler and more affordable starting point, while the F.A Type is for those who want the upgraded loadout from the start. Box Contents YR-05 Nether Emperor F.A Type model kit runners Front Anti-Beam Guard Wing (PF-01) x1 Rear Vector Thrust Wing (PF-02) x1 Armed Storage Side Wings (PF-03) x2 Thunder Pulse ranged weapon x1 Instant Flash Broken Blade x1 Armor-Piercing Thrust retractable bayonet x1 Additional armaments (to be announced by SNAA) Water slide decals (expected, consistent with Emperor Series) Instruction manual Specifications Brand SNAA x Starry Craftsman Series Emperor Series Model Number YR-05 Product Name Nether Emperor F.A Type (Feathered Eagle Equipment) Scale 1/100 Height Approximately 22 cm / 8.66" (pending confirmation) Materials ABS, POM, PVC (pending confirmation) Assembly Snap-fit, no cement required Release August 2026 MSRP (China) 168 RMB Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

Overview The Xinshi Hobby MSX007 Metal Slug X Vehicle Model Kit Set is an officially licensed SNK collection of six injection-plastic vehicle kits based on the classic 1999 arcade run-and-gun shooter Metal Slug X. Each vehicle is a snap-fit assembly kit that builds in minutes, with both sticker and waterslide decals included for game-accurate detailing. Xinshi Hobby (also known as Xinshi Model) is a Chinese manufacturer specializing in licensed video game model kits, and this was their debut product line. Key Features Officially Licensed by SNK - Authorized Metal Slug X vehicle reproductions with game-accurate proportions and detailing Six Vehicles Plus Bonus Seventh Build - Each of the six boxes contains bonus parts that combine to form a seventh vehicle, the Space Tank Snap-Fit ABS Construction - No adhesive required, with minimal runner counts that allow each vehicle to be completed in minutes Dual Decal Options - Both sticker decals and waterslide decals included in every box, giving builders flexibility in finishing PVC Mini Figures - Each box includes one soft rubber character figure, covering both protagonists (Marco and Tarma), enemy soldiers, a POW prisoner, and General Morden Functional Details - Select vehicles feature articulated elements including rotating turret guns on the SV-001 and spinning undercarriage wheels on the Slug Flyer Builder Context This set is suited for all skill levels, including complete beginners and younger builders. Each vehicle assembles from a small number of parts with snap-fit connections and no cement required. The entire six-vehicle set can be completed in roughly one hour. The PVC mini figures are molded in a single color and will benefit from painting for game-accurate appearance, but this is optional. Why Build This Kit The Xinshi Hobby Metal Slug X Vehicle Set is currently the only officially licensed model kit collection covering the iconic vehicles from Metal Slug X, making it the default option for fans who want physical representations of these arcade-era designs on their shelf. The set includes seven vehicles for the price of six - bonus parts distributed across all six boxes combine to form the Space Tank, rewarding buyers who pick up the complete collection. At approximately 3 inches per vehicle, the finished builds are compact enough to display as a group on a single shelf or desk without requiring significant space. Unlike mecha model kits that demand hours of construction, each vehicle here builds in under 15 minutes from minimal runners, which makes this set better suited to collectors and retro gaming fans than to builders looking for a complex construction project. The mini figures are a meaningful inclusion for display purposes, but they are unpainted single-color PVC - builders who want game-accurate characters will need to hand-paint them. Box Contents SV-001/II "Metal Slug" tank with Marco figure SV-F07V "Slug Flyer" with Tarma figure Joint Operation Tank "Shoe" with Prisoner (POW) figure T-2B "Melty Honey" with Soldier figure NOP-03 "Sarubia" with Shielder Soldier figure Land Seek (6.5-ton truck) with Bazooka Soldier figure Bonus Space Tank parts (distributed across all six boxes) General Morden figure (distributed across boxes) Sticker decals and waterslide decals (one sheet of each per box) Assembly instructions (one per box) Specifications Brand Xinshi Hobby Series Metal Slug X License SNK (Official) Item Code MSX007 Material ABS (vehicles), PVC (figures) Vehicle Height Approximately 7.6 cm (3 inches) Construction Snap-fit, no adhesive required Paint Required No (figures benefit from painting) Decals Sticker decals and waterslide decals included Set Contents 6 vehicle kits + 1 bonus vehicle (Space Tank) Figures Included 7 PVC mini figures (unpainted) Package Dimensions 36.7 x 17 x 13 cm Package Weight 940 g Country of Origin China EAN 6971908132077

Overview The Motor Nuclear MNP-XH17 Ma Chao is a Zhong Yong Class model kit from the Legend of Star General series, standing approximately 23.5 cm tall (to head, without backpack). Ma Chao - the "Splendid Cavalry" general of Shu Han - is reimagined here as a heavily armed mecha blending classical Chinese armor motifs with sci-fi engineering, featuring layered beast-face shoulder armor, a switchable helmet visor, and an arsenal of five named weapon systems drawn from Three Kingdoms mythology. Motor Nuclear is a Chinese manufacturer known for original mecha designs backed by a serialized manhua (Legend of Star General), and the Ma Chao is one of the largest and most accessory-dense kits in the lineup to date. Key Features Pre-Assembled Alloy Inner Frame - 13-part pre-assembled metal inner frame provides structural rigidity and display-grade weight, consistent with Motor Nuclear's MNP-tier engineering. 591 Total Parts Across 31 Runners - Includes 7 pre-painted runners with 104 pre-painted parts for display-ready color separation without painting. Nearly all parts are undergated for clean visible surfaces. Five Named Weapon Systems - Zhan Jin Hu Jia (Azure Gold Tiger Halberd, separates into short halberd and short gun), Tianwu Liutou javelins (6 total), Jin Shi Nu (Brocade Lion Crossbow, transforms into shield and arm crossbow modes), Yu Chan gauntlet, and retractable Yu Chan spike. Full On-Body Weapon Storage - All weapons mount to the mecha body via dedicated storage points on the backpack, rear waist, and arms, allowing a fully loaded display configuration without external weapon racks. Swappable Backpacks and Armor - Large and small backpacks interchange freely. Two chest armor options and a riding-pose front skirt armor are included for display versatility. Advanced Leg Linkage System - Knee articulation reaches 75 degrees with linked red inner frame exposure, lower leg bends to 90 degrees with kneecap separation and inner frame reveal. Hip joints extend downward for expanded posing range. Fur Cape Shoulder Accessory - Includes a sculpted fur cape with ornamental attachments. Left shoulder features layered ring-arm armor inspired by classical Chinese lamellar designs, right shoulder carries a beast-face motif with gold-tipped horns. Builder Context The MNP-XH17 Ma Chao is suited for intermediate to advanced builders comfortable with multi-session builds and alloy inner frame integration. Construction is snap-fit with no glue or cement required, and the pre-painted components deliver a display-ready result without painting. The build complexity and part count (591 parts) place it above Motor Nuclear's Loyal Grade kits like the Ao Bing and below the Brave Grade Lu Bu (738 parts), comparable in scope to a high-end MG Bandai kit with the added step of fitting armor over a metal skeleton. Why Build This Kit The Motor Nuclear MNP-XH17 Ma Chao is one of the most weapon-dense kits in the Legend of Star General lineup, with five distinct named weapon systems that each feature their own transformation or separation gimmick - the Jin Shi Nu crossbow alone converts between handheld, shield, and arm-mounted modes. At 23.5 cm with a total assembled weight of approximately 635 grams (with all accessories), Ma Chao has commanding shelf presence that competes with MG-scale Bandai kits while offering a visual language entirely outside the Gundam universe. The on-body weapon storage system means every weapon can be displayed mounted to the mecha simultaneously, creating a fully loaded silhouette without needing separate weapon racks or display stands. Builders who have already built Motor Nuclear's Zhao Yun or Lu Bu will recognize the engineering conventions and alloy frame integration, while the included riding-pose front skirt armor suggests compatibility with future mount accessories. The pre-painted parts and undergated runners mean this kit looks finished out of the box, making it accessible to builders who prefer not to paint but want a result that doesn't look like an unpainted model. Box Contents Main body unit x1 Interchangeable hands x10 pairs Zhan Jin Hu Jia (Azure Gold Tiger Halberd) x1 Tianwu Liutou javelins (left) x3 Tianwu Liutou javelins (right) x3 Large backpack x1 Large backpack Tianwu javelin connectors x2 sets Small backpack x1 Replacement chest armor x1 Replacement arm armor x1 Yu Chan gauntlet x1 Yu Chan spike x1 Replacement front skirt armor (riding pose) x1 Jin Shi Nu (Brocade Lion Crossbow) x1 Jin Shi Nu shield/crossbow mode connector x1 Jin Shi Nu auxiliary connectors x1 pair Jin Shi Nu rear skirt armor storage connector x1 Jin Shi Nu handle x1 Additional replacement hand parts x2 pairs Zhan Jin Hu Jia rear skirt armor connector x1 Fur cape (with ornamental attachments) x1 Body-to-stand connector x1 Hexagonal display base pieces x3 Display base connectors x3 Display base nameplate x1 Display stand x1 set Nameplate sticker sheet x1 Brand Motor Nuclear Series Legend of Star General Product Name Ma Chao (Zhong Yong Class) Model Number MNP-XH17 Height Approx. 23.5 cm (to head, without backpack) Width Approx. 16 cm (without backpack) Body Weight Approx. 377.3 g (without backpack) Total Weight (with accessories) Approx. 635 g Total Parts 591 Runners 31 (7 pre-painted runners, 104 pre-painted parts) Inner Frame Pre-assembled alloy inner frame (13 parts) Materials ABS, POM Construction Snap-fit assembly, no glue required Painting Required No - pre-painted parts and colored runners

Overview The Motor Nuclear MNP-XH05XP Zhaoyun with Moonlight Jade Lion SP Color is a limited edition recolor of Motor Nuclear's flagship Legend of Star General rider-and-mount set, featuring a white-and-silver armor scheme inspired by Zhao Yun's legendary "white-robed, silver-armored general" appearance from classical Chinese literature. The kit includes two complete builds in one box - the Zhaoyun mecha and the fully articulated Moonlight Jade Lion mechanical mount - both built on zinc alloy inner frames with pre-painted armor components. Motor Nuclear is a leading Chinese third-party mecha kit manufacturer known for high part counts, alloy-reinforced construction, and designs drawn from Chinese mythology and the Three Kingdoms era. Key Features Limited Edition SP Color White-and-Silver Finish - Pre-painted silver outer armor recreates Zhao Yun's classical "white robe, silver armor" appearance, with gold and translucent blue accents throughout both models Two Complete Builds in One Box - Includes the Zhaoyun mecha (approximately 23 cm standing, 26 cm with horns) and the Moonlight Jade Lion mount (approximately 32 cm standing), reaching up to 41 cm in a mounted rearing pose Zinc Alloy Inner Frame - 25 alloy components with over 70% alloy proportion in the humanoid inner frame, providing rigidity and long-term pose-holding stability without the joint sag common in all-plastic builds Bionic Four-Layer Horse Construction - The Moonlight Jade Lion uses a bone, muscle, organ, and skin layered structural design with its own alloy inner frame, featuring multi-layered articulated neck, lateral pull joints, and independent dragon claw skirt armor movement 126 Runners and 10 Pairs of Interchangeable Hands - One of Motor Nuclear's largest kits by part count, with extensive hand options for weapon posing and display variety Full Weapon Set with Lightning Effects - Includes the Longdan Bright Silver Spear, Qinggang Sword with sheath, three translucent lightning effect parts for the spear, and two articulated cloaks Three Saddle Configurations - Interchangeable saddle parts allow display in complete form, saddled form, or riding form for different mounted display options Builder Context The MNP-XH05XP is an advanced-level build suited for experienced builders comfortable with high part counts and alloy frame integration. Assembly is snap-fit with pre-painted parts - no cement or painting is required for a display-ready result. At 126 runners with both a humanoid and a fully articulated mount to assemble, the total build time significantly exceeds most Bandai MG kits and is comparable in scope to assembling two separate large-format third-party kits. Builders should note that Motor Nuclear parts are known for sharp edges due to precise mold tolerances - quality side cutters and light sanding are recommended. The rubber-coated metal wire horse reins require careful handling during assembly. Why Build This Kit The Motor Nuclear MNP-XH05XP Zhaoyun with Moonlight Jade Lion SP Color is one of the only model kits on the market that includes a fully articulated mechanical mount with its own alloy inner frame, making it a genuinely unique display piece with no direct equivalent from Bandai or other third-party manufacturers. The SP Color limited edition specifically appeals to builders who want the white-and-silver scheme that references Zhao Yun's most recognizable literary depiction, as opposed to the standard version's colorway. At over 1,600 grams total assembled weight and a mounted rearing height of 41 cm, the finished display presence exceeds most 1/60 and Perfect Grade builds in both footprint and visual impact. Builders already familiar with Motor Nuclear from smaller kits like the BV-XH01 Xiang Yu or the MNP-XH03 Blue Dragon should treat this as a significant step up in complexity and build time. The combination of pre-painted alloy frames, translucent lightning effect parts, and articulated cloaks means the kit looks display-ready out of the box, but the 126-runner part count and dual-build structure make it a multi-session project rather than a weekend build. Box Contents Zhaoyun main mecha body x1 Moonlight Jade Lion (Yulan White Dragon Steed) mechanical mount x1 Longdan Bright Silver Spear x1 Qinggang Sword x1 Sword sheath x1 Longdan Bright Silver Spear lightning effect parts x3 Articulated cloaks x2 Interchangeable hand parts x10 pairs Humanoid display base x1 Horse display base x1 Humanoid stand x1 Horse stand x1 Base connectors x2 Base combination connectors x2 Saddle-to-body connector x1 Sword sheath connector x1 Saddle styling replacement part x1 Horse back styling replacement part x1 Horse arm styling replacement part x1 Rubber-coated metal wire horse reins x1 Horse reins connectors x2 Nameplate x1 Star Soul General sticker sheet x1 Brand Motor Nuclear Series Legend of Star General Model Number MNP-XH05XP Version SP Color Limited Edition (White/Silver) Zhaoyun Height Approx. 23 cm (without horns), 26 cm (with horns) Moonlight Jade Lion Height Approx. 32 cm (without horns) Mounted Rearing Height Approx. 41 cm (without base) Zhaoyun Weight Approx. 450 g (without weapons) Moonlight Jade Lion Weight Approx. 1,200 g Total Runners 126 Alloy Components 25 pieces (over 70% alloy proportion in humanoid frame) Materials ABS, POM, zinc alloy, rubber-coated metal wire Recommended Age 16+

Overview The Sheik Mainland 3MIN Project-A Fenrir A6 Assault Type is a 1/18 scale mecha model kit and the heavy-assault tactical variant of the original Fenrir A2 Standard Type. Roughly half the runners are entirely new molds, covering a redesigned head, chest armor, shoulder armor, shin armor, tactical comms backpack, skirt armor, and a significantly expanded weapon and hand type loadout. Each box includes two complete Fenrir A6 kits, and the model supports three official configurations - CQC (Battle Armor), LA (Light Assault), and FA (Full Armor) - plus an undocumented transformation into a mechanical locust form using the existing joints and armor structure. Key Features Three Official Configurations - CQC Battle Armor for maximum protection, LA Light Assault for mobility-focused loadouts, and FA Full Armor for the heaviest weapon and armor coverage. Standard Type shoulder and knee armor parts are included for additional light-configuration options 8 Pairs of Hand Types - Five pairs feature wrist lateral articulation for natural weapon-holding angles. Includes fist (with movable thumb), pointing/finger-gun (with movable thumb), open palm (with four-finger inward bend), angled-grip pairs in both square and round hole variants for different weapon handles, and one bonus pair of POK wrist reinforcement joints for long-term durability Expanded Heavy Weapon Loadout - Rocket launcher with detachable warhead and rotatable grip/scope, assault rifle, micro submachine gun, tactical machete, dagger, grenade, and arm shield. All weapons are cross-compatible with the Standard Type Fenrir Tactical Comms Backpack - Rear-mounted radio module that detaches as a standalone display prop. The antenna is made from flexible soft rubber to resist white stress marks and breakage during handling Improved Joint Tuning - Upper waist tightened, lower waist loosened, and hip ball joints recalibrated compared to the Standard Type. Joint damping is more consistent across the entire body, and the knee joint no longer risks stress marks from over-tight assembly Rear-Mounted Skirt Armor - Both halves pivot from the rear on ball joints, allowing them to swing clear for forward kicks, side kicks, and deep crouching poses. Front skirt is a separate piece that flips upward independently Two Complete Kits Per Box - Standard packaging includes two full Fenrir A6 units with all accessories Builder Context The Fenrir A6 Assault Type assembles in approximately 10-15 minutes per unit using optimized single-gate runner design with no tools, adhesives, or painting required. Build time is longer than the Standard Type due to the additional armor and weapon parts but remains beginner-friendly. The instruction manual has known diagram errors at step 5 (hip joint orientation shown inverted) and mislabeled part numbers on the arm assembly - builders should match parts by shape rather than relying solely on the printed part numbers. The 3mm port system is fully compatible with Bandai 30MM, Kotobukiya MSG, and other Sheik Mainland 3MIN series accessories including the Xenostrike, Xentinel, and Worker Bee lines. Why Build This Kit The Sheik Mainland Fenrir A6 Assault Type is the recommended starting point for the 3MIN Project-A series if choosing between the A6 and the Standard Type, because it delivers significantly more accessories, improved joint tuning, and greater configuration variety at the same price tier. Chinese reviewer consensus from multiple July 2026 build videos confirms that the A6's wrist lateral articulation - present on five of the eight hand pairs - resolves the most common complaint about 1/18 scale kits: unnatural weapon-holding angles, particularly with longer rifles. At approximately 11 cm tall, the Fenrir A6 packs articulation density comparable to Bandai's RG line into a kit that costs under $15 per unit (two per box), making it one of the highest value-to-articulation ratios currently available from any manufacturer at any scale. The A6 does not replace the A2 Standard Type - the two designs are visually distinct enough to display well together, and the A6 includes the Standard Type's original shoulder and knee armor as alternate parts. Builders should note that the A6 does not include the small display stand that comes with the Standard Type, and the thicker shin armor slightly reduces maximum knee bend compared to the A2. Box Contents 2x Fenrir A6 Assault Type runner sets (approximately half new-mold runners) New-mold head, chest armor, shoulder armor, shin armor, and knee armor parts Standard Type shoulder armor and knee armor parts (for light configuration) Tactical comms backpack with detachable radio module and soft rubber antenna Rear-mounted skirt armor with ball-joint pivot assembly Rocket launcher (detachable warhead, rotatable grip and scope) Assault rifle Micro submachine gun Tactical machete Dagger Grenade Arm shield 8 pairs of hand types (5 with wrist lateral articulation, 1 POK reinforcement pair) Shoulder-mounted weapon hardpoint adapters Ball-joint to straight-peg connector adapters Angled connector adapters (for offset shield mounting) Assembly instructions Specifications Series 3MIN Project-A Scale 1/18 Height Approximately 11 cm (head height) Materials PS, POK (composite joints and bonus wrist joints), soft rubber (backpack antenna) Kit Count 2 per box Assembly Time Approximately 10-15 minutes per unit Construction Snap-fit, no tools or adhesives required Configurations CQC (Battle Armor), LA (Light Assault), FA (Full Armor) Hand Types 8 pairs (5 with wrist lateral articulation) Compatibility 3mm universal hardpoints (30MM, MSG, Sheik Mainland 3MIN series) Display Stand Not included Release July 2026 Manufacturer Sheik Mainland Preorder Notice:This item is currently on preorder and will be shipped once available. Please be aware that cancelling a preorder will incur a 25% restocking fee. For detailed information on our preorder and cancellation policies, please visit our FAQs page.

The Bandai HGBF #03 1/144 GX-9999 Gundam X Maoh is a High Grade Build Fighters kit based on Mao Yasaka's custom Gunpla from the Gundam Build Fighters anime series. A heavily modified version of the GX-9900 Gundam X from After War Gundam X, the Gundam X Maoh features redesigned Reflect Thrusters across its body and an enhanced Hyper Satellite Cannon with devastating firepower worthy of its name - "Maoh" meaning "Demon King" in Japanese. This snap-fit kit is suitable for beginner to intermediate builders, requiring no glue or painting for a complete build. The kit reproduces the Maoh's distinctive red, black, and white color scheme through color-separated molding. Key Features Hyper Satellite Cannon: Enhanced version of the original Gundam X's Satellite Cannon, poseable in both stored and firing positions with Reflector Unit conversion Full Body Reflect Thrusters: Redesigned thruster system reproduced across the body for an aggressive, high-performance appearance Shield Buster Rifles: Dual-mode weapon system that converts between Rifle Mode and Shield Mode Large Beam Sword: Plus-shaped beam blade stored on the end of the Satellite Cannon, removable as a handheld weapon Color-Molded Construction: Multi-color runner system minimizes the need for painting to achieve an accurate color scheme Ball-Joint Articulation: Double-sided ball-and-socket joints at the head, shoulders, and manipulators for dynamic posing Included Equipment and Accessories Gundam X Maoh mobile suit Hyper Satellite Cannon Large Beam Sword Beam Saber Shield Buster Rifles Weapon-holding manipulators (1 pair) Open-palm left manipulator Foil sticker sheet Instruction manual Specifications Brand Bandai Series Gundam Build Fighters Line High Grade Build Fighters (HGBF) Kit Number 003 Scale 1/144 Model Number GX-9999 Mobile Suit Name Gundam X Maoh Pilot Mao Yasaka Bandai SKU 2221155 UPC 4573102587862 Product Type Model Kit Material PS, ABS, PE Runner Count 10 Country of Origin Japan Release Date November 2013

The Bandai HGBF #11 1/144 NMX-004 Qubeley Papillon is a High Grade Build Fighters model kit based on Aila Jyrkiäinen's custom mobile suit from the Gundam Build Fighters anime series. Derived from the iconic AMX-004 Qubeley, the Papillon variant features a redesigned silhouette with oversized shoulder binders and a striking turquoise, purple, and pink color scheme that earned it the nickname "icy butterfly" on the Gunpla Battle field. This snap-fit kit is suitable for beginner to intermediate builders, requiring no glue or paint for a complete build. The NMX-004 was custom-built by the Finnish Gunpla Battle team Nemesis and is equipped with both standard and invisible funnels, beam sabers that double as beam guns, and a unique lance bit weapon. Key Features Distinctive Shoulder Binders: Faithfully recreates the Qubeley Papillon's signature oversized shoulder binders, the most recognizable element of the mobile suit's butterfly-inspired design Multiple Weapon Systems: Includes funnels, two beam sabers, and a lance bit for versatile combat display options Dedicated Display Base: Comes with a personal display base designed specifically for the Qubeley Papillon Multi-Color Molding: Molded in multiple colors to accurately represent the suit's vibrant turquoise, purple, and pink color scheme straight out of the box Foil Sticker Sheet: Includes holographic foil stickers for premium surface detailing on key areas Snap-Fit Assembly: No glue required - parts snap together securely for a clean build experience Full Articulation: Ball-joint and polycap construction allows for expressive action poses and dynamic display Included Equipment and Accessories Qubeley Papillon model kit (8 runners) Funnels Beam sabers x2 Lance bit Dedicated display base Foil sticker sheet x1 Instruction manual Specifications Brand Bandai Series Gundam Build Fighters Line HGBF (High Grade Build Fighters) Kit Number #011 Scale 1/144 Model Number NMX-004 Mobile Suit Name Qubeley Papillon Pilot Aila Jyrkiäinen Bandai SKU 2221161 UPC / JAN 4573102736956 Product Type Model Kit Material PS, PE Country of Origin Japan Release Date February 2014

The Bandai HGBF #10 RGM-79K9 GM Sniper K9 is a 1/144 scale model kit from the Gundam Build Fighters series. This custom Gunpla, piloted by Julio Renato of the Renato brothers, is based on the RGM-79SP GM Sniper II from Mobile Suit Gundam 0080: War in the Pocket and features an oversized beam sniper rifle along with the signature K9 Dog Pack support unit. This snap-fit kit is suitable for beginner to intermediate builders, requiring no glue or painting for a complete build. As a bonus, all base parts from the original GM Sniper II, including its 0080-era weapons, are included so builders can construct either version of the mobile suit. Key Features K9 Dog Pack: Detachable backpack unit that separates into an independent self-propelled support unit, capable of mounting the beam sniper rifle for autonomous operation Beam Sniper Rifle: Custom 200mm large-caliber beam sniper rifle with deployable monopod for stabilized firing and movable foregrip and main grip Dual-Build Option: Includes all base parts from the original GM Sniper II with 0080-era weapons, allowing builders to construct either the K9 Custom or the standard GM Sniper II Full Weapon Loadout: Comes with beam sniper rifle, two beam pistols, combat knife, two beam sabers, and lance bit Dedicated Display Base: Includes a display stand for dynamic posing and action scenes Snap-Fit Assembly: Pre-colored plastic parts molded in multiple colors require no glue or paint for an accurate finished appearance 1/144 Scale Figures: Includes eight 1/144 scale soldier figures and a transport cage accessory Included Equipment and Accessories GM Sniper K9 mobile suit K9 Dog Pack backpack unit Beam Sniper Rifle Beam Pistol x2 Combat Knife Beam Saber x2 Lance Bit Transport Cage 1/144 Soldier Figures x8 Dedicated Display Base Bonus GM Sniper II base parts and 0080 weapons Foil Sticker Sheet x1 Instruction Manual x1 Specifications Brand Bandai Spirits Series Gundam Build Fighters Line HGBF (High Grade Build Fighters) Kit Number #010 Scale 1/144 Model Number RGM-79K9 Mobile Suit Name GM Sniper K9 Pilot Julio Renato Runners 12 Bandai SKU 5058790 UPC 4573102587909 Product Type Snap-fit Plastic Model Kit Material PS (Polystyrene) Country of Origin Japan Release Date February 2014